Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹25.9 L+₹60,250 (2.38%)Rejected-Finance FLAT NO 744 RAMA APARTMENTS PLOT NO 2 SECTOR 11 DWARKA NEW DELHI 110075 | SOUTH WEST | DELHI | 110075 | L2 | Rejected-Finance BIDDER NOT LOWEST | |
| 3 | L3₹26.2 L+₹87,551 (3.46%)Rejected-Finance | L3 | Rejected-Finance BIDDER NOT LOWEST | |
| 4 | L4₹27.1 L+₹1.8 L (7.04%)Rejected-Finance N A | NA | NA | 121004 | L4 | Rejected-Finance BIDDER NOT LOWEST | |
| 5 | L5₹28.3 L+₹3.0 L (11.7%)Rejected-Finance C 204 NANGLI EXTN NEW DELHI | WEST | DELHI | 110043 | L5 | Rejected-Finance BIDDER NOT LOWEST |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
24 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST DELHI CANTT 10
GE WEST DELHI CANTT 10
REPAIRS TO JOINERY IN MD ACCN OF AGE BR II UNDER GE WEST DELHI CANTT 10
2023_MES_587049_2
GE/DW-24/2023-24
Open Tender
Civil Works
Item Rate
180 days
DELHI CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE WEST DELHI CANTT
₹80,000
21 Aug 2023
27 Jun 2023
26 Jul 2023
27 Jun 2023
24 Jul 2023
11 Jul 2023
Amount
Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) all as specified.
Taking down door/window/ventilator frames with shutters exc 1.50 sqm but not exc 4.0 sqmeach (without taking off shutters from frame) all as specified.
S&F fibre glass reinforced plastic (FRP) factory made door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame as per specification complete all as specified and directed.
S&F FRP factory made door shutter 30mm thick glass fibre reinforced plastic (FRP) moulded door shutter of required colour of approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as directed and specified .
M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium frame section for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/top hung type without sash bars, partly fixed type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
M&L for powder coated aluminium hollow section for 3 track sliding window with window frame and two glazed shutter and one nos glazed wire gauged shutter sliding type with aluminium section weighing 0.55 Kg/mtr with 3 track for sliding window with framed shutter including aluminium alloy powder coated snap typed beads, handle aluminium glazing clips, cleats, rubber gasket etc including 4 mm thick tinted glass of superior quality and all standard fittings viz . runner, locking arrangements complete all as specified and directed.
S&F 4 mm thick froasted sheet glass, ordinary quality and glazing with aluminium beads in square n exc 0.50 sqm in each pane, complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, wooden beading etc complete all as specified and directed.
M&L for powder coated aluminium grill of powder coating of minimum 50 micron with aluminium mesh of size 50 mm x 50 mm with square tube solid 6 mm thick including aluminium channel of suitable size thickness of channel 1.5 mm complete all as specified and directed.
M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints,including fixing in wall with screw/ hold fast / cement concrete complete all as specified.
S&F 35 mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), supplied and fitted to chowkats complete all as specified and directed.
M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass/guage etc. (with sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass /wire cloth complete all as specified and directed.
S&F flush shutter 35 mm thick solid core moulded construction with block board core and plywood face surface laminated panels covered complete all as specified and directed.
S&F mild steel work as in hold fast 25x3 mm flat iron and similar articles conforming to Fe-410-0 complete all as specified and directed.
M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed.
M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F in opening Solid PVC door frame (Factory made) of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as per specification and as per drawing on Sl page 150 of SSR (Part II) complete all as specified and directed.
S & F Solid panel PVC door shutter (Factory made) 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded prelam PVC sheet having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail, bottom rail on either side & as gap insert for top rail & bottom rail, panelling of Prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and provision of partially louvred frames, Supply & Fixing in the frame at site, complete all as per s) complete all as specified and directed.
S&F 125mm size extruded aluminium handle, fabricated type anodised complete all as specified and directed.
S&F 100 mm long (size) stainless steel butt hinges, medium weight, cold rolled complete all as specified complete all as specified and directed.
S&F aluminium anodised barrel tower bolt 150 mm long, extruded section complete all as specified and directed.
S&F 250 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrude section or stainless steel complete all as specified and directed.
S&F for 19/20mm thick particle board as in CB shutter, lipping and necessary rebating for double shutter where required and polishing to lipping including dismantling of old boards complete all as specified.
S & F Continuous (piano) hinges, mild steel bright finished or electrogalvanised, width of flap (when open) 30 mm complete all as specified and directed.
S&F Magnet Catcher of standard size and quality as in kitchen cabinet all as specified.
S&F 40mm dia stainless steel cupboard knobs fixed with nuts, screw and washer of mild steel, bright finished, complete all as specified and directed.
Taking down cement plaster on brick work including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.and
M&L for 15 mm thick rendering in CM (1:6) on walls as whole or in patch of any faces of brick/concrete finished even and fair without using extra cement including necessary scaffolding complete all as specified and directed.
M&L 5 mm thick rendering of ready mix mortar of approved make on ceiling, as whole or in patch complete all as specified and directed..
M & L for preparation of new surfaces (plastered or un-plastered) of walls including cornices/pillars etc. by brooming down and applying two coats of Oil Bound Distemper over a coat of wall care putty to uniform smooth surface not more than 1mm thick over a coat of primer complete all as specified and directed .
M&L for preparation of new surface of ceiling andapplying two coats of Oil Bound Distemper over a coat of wall care putty to uniform smooth surface not more than 1mm thick over a coat of primer complete all as specified and as directed.
M & L for preparation of new surfaces (plastered or un-plastered) of walls including cornices/pillars etc. applying two coat of cement base paint over primer complete all as specified and directed .
M&L for coloured joint free non skid ceramic tiles 7 to 8 mm thick 400mmx400mm in floors set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in CM 1:6 including demolition of old and rubbish off beyond MOD land complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level) all as specified.
M&L for Machine pressed colured pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, complete all as specified and directed.
M&L for Machine pressed colured pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade, complete all as specified and directed.
M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
M&L for 50mm thick sand cushion/sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for powder coated aluminium grill in repair of powder coating of minimum 50 micron with aluminium mesh of size 50 mm x 50 mm with square tube solid 5 mm thick including aluminium channel of suitable size complete all as specified and directed.
M&L brick work built in cement mortar 1:6 using sub class 'B' bricks (old size bricks) straight or curved on plan exc 6 mtr mean radius including demolition of brick work built in Cement mortar and removing the debries beyond MoD land complete all as specified and directed.
M&L for pre-painted galvalume aluminum zinc coating GI based corrugated(150 GSM) steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down old GI sheets complete all as specified and directed.
M&L for machine cut Kota stone slab 18to 20 mm thick as laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including cement screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L for Coloured Cement concrete Pre polished & reflective type chequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors and cut and pointed with white cement and pigment including cement screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.
Repair/Replacing damaged components of rolling shutters of any size/overhauling by oiling, greasing of bearing and movable parts of rolling shutters of any size incl replacing of all unserviceable parts like flush butt welding of any broken members, spring, locking arrangements, anchoring rod , riveting to make the shutter absolutely in working condition complete all as specified and directed.
Repairs to steel gates/steel doors/sliding doors by straightening the bent portion and broken parts with welding and gas cutting including greasing all as directed by Engineer in charge. Incorporated items will be measured seperatly
Providing & Fixing in repairs in position suspended false celling system using E–Grid suspended celling Grid system . The size of Grid shall be 595 X 595 X 8mm (one side aluminium foiling) with powder coated GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 8mm thick High Pressure Stream cured non primered classic/designer variant E–Board ISI Marked IS No 14862–2000. Fibre cement E–Board to be placed in the gird of E–Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers (level clip with wire) 1.20m centre to centre from the soffit of the roof with butter fly clips using soffit cleat (web:25mm, Flange:37mm & Thickness : 1.8 mm) and metal row plug (12.7mm diameter) including dismaltaling of old false ceiling complete all as specified and diracted by Engr–in–charge.
M&L for vitrified light coloured joint free tiles 600x600 8 to 10 mm thick (square/rectangular) polished , area of each tile n exc 0.36 sqm, in floor set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:6 including demolition of old and rubbish off beyond MOD land etc complete all as specified and directed.
Ditto as per item No 48 above but on vertical surfaces of wall over & incl CM(1:4) 10mm thick cement plaster etc. comnplete all as specified and directed.
Demolition of cement concrete (un-reinforced) as in foundation for rolling shutter , sub base floorv paving and any position and any thickness upto seven story building including removal of rubbish out side complex (MOD land) , complete all as specified and directed.
Taking down rolling shutters including guide rail, spring, locking arrangements , riveting, cover dome etc exc 5.0 sqm but not exc 9.00 sqm each complete all as specified and directed.
M&L PCC 1:4:8 type D-2(40mm graded aggregate) in foundation , filling and mass concrete complete all asspecified and directed.
M&L PCC 1:2:4 type B-2(40mm graded aggregate) in foundation , filling and mass concrete complete all asspecified and directed.
M L for Framed brackets of angles or tees with web and flanges, I-section Beam, C-section Beam cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. not exc 10 kg each brackets, conforming to Fe. 290, Gde E-165 complete all as specified and directed.
M & L for framed work such as grills, grating etc with ends of bars shouldered or riveted, framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work conforming to Fe - 290 Ge E-165 etc complete all as specified and directed.
M&L for Mild Steel for portions framed and hung as gates ,including hold fasts ,hinges, pintals ,hand made sliding boltets complete all as specificed and directed
M & L for Mild steel, plain, black sheet 1.6 mm thick in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred complete all as specified and directed.
M & L preparation of new steel surfaces of any description over 10 cm in width or girth otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide or zinc chrome primer complete all as specified and as directed.
Deduct Credit: for demolished/dismantled material of (-) Rs 148800.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.
stage.html
html • 0.07 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .