Construction of Road at Kh.No 1237, 1238, 1970/1239, 1240 to 1243, 1971/1245 at Tiger Hill (Badgaon). 2903

Item Code [2022 road 3.18]:Item Type [road] :: Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2)

Item Code [BSR-2025 MSS 5.8 VG -30]:Item Type [road] :: Providing , laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2mm to 0.9 mm (Type-A) or13.2mm to 0.9 mm(Type-B) aggregate using Viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per MoRTH Specification Clause 508, By Mechanical Means Type A Bitumen (VG-30)

Item Code [BSR-2025 prime coat 5.1.1]:Item Type [road] :: Providing and applying primer coat with bitumen emulsion( SS-1)on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/ sqm using mechanical means as per MoRTH Specification Clause 502

Item Code [BSR-2025 WMM 4.6]:Item Type [road] :: Providing, laying ,spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill),carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel rollerof80to100 kN weight to achieve the desired density including lighting ,barricading and maintenance of diversion,etcasperTables400-12&400-13andMoRTH Specification clause 406 By Mechanical Means with all lead .

Item Code [Rd 2025 Embankmant 3.3]:Item Type [building] :: Construction of Embankment with Material Obtained from Roadway CuttingConstruction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300 1 and 300-2 as per MoRTH Specification Clause 305.3

Item Code [Rd-2025 BM 5.3.2]:Item Type [road] :: Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as perTable500-7 premixed with bituminous binder, transported to site with all lead laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per MoRTH Specification Clause 504 Bitumen (VG-30

Item Code [Rd-2025 excavation 3.8.3 ]:Item Type [road] :: (Excavation in Ordinary Rock using Hydraulic Excavator and Tippers with disposal upto 1000 m). Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site with a lift upto 1.5 m and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per MoRTH Specification Clause 301.3.5

Item Code [Rd-2025 Road Markers 10.20]:Item Type [road] :: Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements

Item Code [Rd-2025 tack coat 5.1.2]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion(RS-1) using emulsion distributor at the rate of 0.25 to0.30kgper sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503