SPECIAL REPAIRS TO PARADE GROUND INCLUDING ALLIED WORKS AT INS HAMLA UNDER GE NW BHANDUP

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thick below or above ground level complete all as specified and directed.

M&L for providing cement concrete 1 : 2 : 4 type B1 (20mm graded aggregate) in kerb stones and the like including weathering, slightly rounded or chamfered angles and throating,fixing in position complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, cornices , concrete coping etc on brick work complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise spcifically provided for complete all as specified and directed.

Taking down cement plaster on brick wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for brick work in sub class 'B' Bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick/concrete surfaces in CM 1:4 finished even and fair complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L precast RCC 1 : 1.5 : 3 type A1 (using 20mm graded stone aggregate) in cover slab and set in CM 1:4 including necessary form work complete all as specified and directed.

Supply and fix TMT bar 10mm dia and over, cut to length, bent to shape required including cranking bending, spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed confirmed to Fe 410-0 complete all as specified and directed.

M & L for cement concrete type B-0, 1: 2: 4 mix (using 12.5mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed.

M & L for cement concrete 100mm thick type C2, 1:2 : 4 ( using 20mm graded stone aggregate) as in drain and finishing even and smooth without using complete all as specified and directed.extra cement complete all as specified and directed.

M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a tack coat with paving bitumen of VG-10 grade @ 5 Kg per 10 Sqm with pressure sprayer over existing black top surface etc complete all as specified and directed.

M&L for Bituminous premix semi dense asphaltic concrete 25mm consolidated thickness with 5.5% binder content (paving bitumen of VG-30 grade) by weight of total mix prepared in hot mix plant, laying of mix with self propelled mechanical paver, the surfaces rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and tandem vibrating roller etc complete all as specified and directed. Notes: The contractor's quoted rates shall also be deemed to include the following elements: (i) The contractor shall get the mix design done through Govt. approved Lab and the same shall be got approved from the GE before providing SDAC. (ii) In case of variation in the bitumen content as per approved design mix in comparison with the bitumen content as specified above, the variation in quantity of bitumen shall be adjusted @ Rs.37 per Kg .

M & L for thermoplastic road marking paint, white or golden yellow, conforming to BS-3262 applied on road/pavement as in lines, dashes, arrows, letters etc, not exc 10 cm in width & of thickness not less than 2mm, with and including combination of retro-reflective glass beads 250-300 gm/ Sqm all as per manufacturer's instructions, using thermoplastic application unit etc, complete all as specified & directed.

M&L for three coats of white wash on new surface of wall including preparation of surface complete all as specified and directed.

M&L preparation of old/New concrete surfaces, kerb stones etc and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F Stainless steel railing of grade-316L for stair case, including welding, edge grinding and inserting in steps by making groove or by other suitable method complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M & L 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.including 15 mm thick plaster in cement mortar (1:6) complete all as specified and directed.

m/s ashoka enterprises