Providing Additional e-Sewa Kendra Porta Cabin in Combined Court Building at Alandur in Chennai District

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60 x 44.45 x 3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50 x 44.45 x 2.50mm @ 1.292 kg/m ,Bottom rail: 100 x 44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50 x 44.45 x 2.5mm @ 1.292 kg/m, Alu Clips: 17.15 x 17.27 x 1.50mm @ 0.176 kg/m,Alu. Handle: 100 x 30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Each., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete. Aluminium sections, and furniture fittings shall be got approved from the Executive Engineer incharge.

Fabricating, Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.70 mx 2.10 m.The outer frames Outer frame: 63.50 x 38 x 3mm@ 1.72 kg/m, Centre mullions: 63.50 x 38 x 3mm@ 1.55 kg/m, Alu. Clips: 17.27 x 17.15 x 1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.50 mm thick plain glass with neccessary aluminium clips of size 17.27 x 17.15 x 1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column, masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification 1868/1962 and should be got approved from Executive Engineer before use.

Supply and installation of Acoustical False Ceiling of Higher absorption nubby finish tiles, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 120 Kgs / m3, weight 1.8 / 2.4 / 3 kg / m2 which is suspended by using 0.3mm thick T15 metal grid system. T15 metal grid system of 600 x 600mm module includes WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally, the CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. The Higher absorption Nubby finish tiles square edge of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department officers. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc. complying to standard specication.

Manufacturing and supply of Modular computer table size of 60" x 21" x 30" made out of 18mm and 25mm thick partical board with key board tray, CPU provision, open shelf and open rack etc., complete and as directed by the departmental officers.

Supplying the steel computer revolving chair 5 Prong metal base and 20mm type caster wheel push back arrangements and ABS back, 40 density 50mm thick mould foam cushion seat and back of upholstery cloth and height adjustment arrangements with pu arm etc., complete and as directed by the departmental officers.

GST @ 18 %