SPECIAL REPAIR TO BLDG NO P-521 to 522 of JAK RIF AND SPECIAL REPAIR/REPLACEMENT OF 08 SHUTTER AND ROOF TREATMENT OF 16 GARH RIF AND SPECIAL REPAIR TO BLDG NO P-186 OF 706 TPT COY UNDER GE (SOUTH) JAIPUR

Amount

04/SR(Bldg)/61SA/20-2021/Q3W Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM. 4/SR/Bldg - 870 8/SR/Bldg - 300 10/SR/Bldg - 300

M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified. 4/SR/Bldg - 445 8/SR/Bldg - 100 10/SR/Bldg - 150

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even. 4/SR/Bldg - 275 8/SR/Bldg - 100 10/SR/Bldg - 250

M&L for rendering 10mm thick in cement mortar 1:3 on concrete surfaces including finished even & smooth without using extra cement on ceiling. 4/SR/Bldg - 150 8/SR/Bldg - 100 10/SR/Bldg - 100

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of Birla wall care putty on walls all as specified & directed by Engineer-in-Charge. 4/SR/Bldg - 445 10/SR/Bldg - 150

M&L for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces. 4/SR/Bldg - 150 8/SR/Bldg - 100

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed by Engineer-in-Charge. 4/SR/Bldg - 275 8/SR/Bldg - 100

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for. 4/SR/Bldg - 15 8/SR/Bldg - 05 10/SR/Bldg - 01

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. 4/SR/Bldg - 384 10/SR/Bldg - 360

S&F Coloured Glazed ceramic tiles size 300x450mm x 7mm thick edge cut/ joint free , on walls etc in the combination of light and dark shed concept . set & jointed in neat cement slurry & pointed in white/coloured cement to match over 15mm thick plaster in cement mortar (1:4). 4/SR/Bldg - 100 10/SR/Bldg - 150

M&L for coloured Non Skid Ceramic tiles joint free 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.16 sqm but not exceeding 0.38 sqm , in floors etc, set and jointed in neat cement slurry or tiles addeshive and pointed in white or coloured cement to match over 15mm thick Screed bed in Cement Mortar (1:4) Pattern and colour as directed by Engineer-in-charge. 4/SR/Bldg - 260 10/SR/Bldg - 200

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick Screed bed in Cement Mortar (1:4) Pattern and colour as directed by Engineer-in-charge.

M&L CP cast copper alloy bib taps two way with wall flange and areator fancy type of 15 mm bore quarter turn (Make-CERA CAT PART NO CQ 606or equivalent of MARC, JAQUAR) fixed in repair.

S&F in repairs PVC connection 15mm bore with 2 Nos PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge. Make - PRAYAG/SIMET 4/SR/Bldg - 24 10/SR/Bldg - 15

M&L in repairs CP fancy Type center hole basin mixer 15mm bore cast copper alloy with 450 mm copper hose /braided hose without Popup waste system quarter turn (Make-CERA CAT PART NO CQ 615 or equivalent of MARC, JAQUAR) 4/SR/Bldg - 6 10/SR/Bldg - 6

M&L for CP wall Mixer fixed in repairs with flange & 115 mm long bend pipe forover head shower non Telephonictype with connecting legs wall flanges and crutch etc quarter turn ( Make-CERA CAT PART NO CQ 612 or equivalent of MARC, JAQUAR) 15mm bore for mixing hot & cold w

M&L Towel ring of brass CP Squar flange (Make-CERA CAT PART NO CQ 102 or equivalent of MARC, JAQUAR) and fixed in repairs

M&L Chromium plated Overhead Rain shower with relvoling joint and 115mmlong shower arm with wall flange 15 mm bore fancy type any colour (Make-CERA CAT PART NO CP 140 or equivalent of MARC, JAQUAR) and fixed in repair

M&L Chromium plated angle stop cock with wall flange fancy type cast copper alloy 15 mm bore any colour (Make-CERA CAT PART NO CQ 608 or equivalent of MARC, JAQUAR) fixed in repair

M&L CP cast copper alloy bib taps Long body with wall flange fancy type of 15 mm bore quarter turn (Make-CERA CAT PART NO CQ 604 or equivalent of MARC, JAQUAR) fixed in repair.

S&F in repairs Vitreous China wash hand basin flat back basin including half pedastal CERA Part No 1071 CYRCSS white / , coloured, , size 610x560mm including CP waste coupling but excluding taps, waste chain & plug & ( Make-Make-CERA CAT PART NO1071 or equivalent of , HINDWARE/ PARRY WARE ), fixed in repair

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( Pedestal pattern ),white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete Make-EWC HINDWARE CAT PART NO 20053 TULIF or equivalent& CISTEREN HINDWARE CAT PART NO 21036 or equilant ) fixed in repair

S&F in repair 10 litres PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket and PVC flushing pipe of Polythene of low or high density 32mm dia 10 Lit capacity ( Make-HINDWARE CAT PART SLEEK PLUS or equivalent) fixed in repair.

S&F Waste fittings 32mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed(Make-MARC CAT PART NO MAC 3020 or equivalentof CERA JAQUAR) fixed in repair

S&F CP bottle trap with internal partition 32 mm size with 300 mm X 190 mm long wall connection pipe and wall flange for WHB (Make-Make-CERA CAT PART NO CM 104 B or equivalent of MARC, JAQUAR) fixed in repair

Taking down the existing unserviceable stop valve and S&F stop valve 15mm, . copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F in repair Stop valves 20 mm bore, . copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions. 4/SR/Bldg - 6 10/SR/Bldg - 2

S&F in repairs of CP pressure JET for EWC including flexible pipe for 15 mmdia bore.

Dismantling of old U/S gratingand M&L of PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap.( Make Paryag and equilant ) 4/SR/Bldg - 12 10/SR/Bldg - 10

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore. 4/SR/Bldg - 60 10/SR/Bldg - 20

20 mm bore. 4/SR/Bldg - 50 10/SR/Bldg - 5

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including Dismantling water tanks & removing to store Make . Polycon/ syntex etc

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule and fixed in repair 4/SR/Bldg - 6 10/SR/Bldg - 2

M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of thank of PVC cylindrical water tank of capacity 500/1000 liters using PCC 1:3:6 type c1 using 20mm graded stone aggregate with smooth finish. 4/SR/Bldg - 6 10/SR/Bldg - 2

Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 3 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal frame. 4/SR/Bldg - 30 10/SR/Bldg - 5

S&F in repairs elegent mirror PVC cabinet with towel rail of size 475 x 600 x 150 mm all as specified (Make : Paryag/ Commander)

Tooth brush holder/ Tumbler brass CP for putting bathroom utilities ((Make-CERA CAT PART NO CA 104or equivalent of MARC, JAQUAR) fixed in repair

Soap dish brass CP ((Make-CERA CAT PART NO CA 103 or equivalent of MARC, JAQUAR) fixed in repair

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, & steel peg stay, complete without glazing bars, dovetailed or welded incl. taking down old window

Factory made steel ventilators with top hung shutters incl hinge steel peg stay complete incl. taking down old ventilator

S&F Cast Iron sand cast soil, waste and vent pipe 75mm bore in any length with or without ears with cement joints fixed to walls including taking down existing pipe.

S&F Cast Iron sand cast soil, waste and vent pipe 100mm bore in any length with or without eaars with cement joints fixed to walls including taking down existing pipe.

S&F Cast Iron bends any radius 75mm dia

S&F Cast Iron bends any radius 100 mm dia

S&F in repairs Cast Iron branch pieces single, (Single T) equal or unequal 75mm dia including taking down existing pipe.

S&F Cast Iron branch pieces single, (Single T) equal or unequal 100mm dia

S&F Cast Iron cowl 100mm dia

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement

Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws(Make-CERA CAT PART NO CA 106 or equivalent of MARC, JAQUAR) fixed in repair

S&F in repairs bathroom Glass corner of best quality (as per sample)

M/L for Fancy type MS bracket suitable for curtain rod fixed in repair 4/SR/Bldg - 60 10/SR/Bldg - 36

M&l of 20 mm dia Drapery Fancy type curtain rod fixed in repair. 4/SR/Bldg - 60 10/SR/Bldg - 50

M/L for Fancy type caps/ side Bulbs PVC powder coated suitable for curtain rod fixed in repair. 4/SR/Bldg - 60 10/SR/Bldg - 36

Providing and fixing 28mm thick factory made PVC Supreme Door Shutter consisting of frame made out of m.S. tubes of 19 gauge thickness nd size of 40mmx20mm for stiles, top and bottom rails having a coat of steel primers of approved make and manufacture. M.S. Frame covered with 4mm thick heat moulded "Rajshri" Prelam PVC 'C' Channel of size 28mm thickness,75mm width out of which 60mm shall be flat and 15mm shall be tapered in 45dgree angle on either sides forming stiles, top and bottom rail and 100mm wide Rajshri Prelam PVC sheet out of which 100mm shall be be flat and 15mm shall be tapered An additional of 5mm thick PVC sheet of 20mm width is to be stuck on the interior side of 'C' Channel using PVC solvent adhesive etc. complete on both sides to form lock rail.Lock rail shall be provided on either side of panel. Panelling of 4mm thick PVC sheet to be fitted in the MS Frame welded/sealed to the stiles with 8mm (4mm + 4mm) x 12mm wide PVC sheet as beading on inner side and 8mm (4mm + 4mm) x 20mm wide PVC sheet as beading on the inner tapered side of lock rails joined together with solvent cement adhesive. An additional of 4mm thick PVC sheet of 20mm width is to be stuck on the interior side of 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification and drawing. 4/SR/Bldg - 10 10/SR/Bldg - 10

Providing and Fixing Factory made Adjustable (PVC) Doorframe Manufactured by M/s Rajshri of the size 65mm x 60mm with a wall thicknes of 4mm, made out of extruded 4mm PVC foam sheet, metre cut at two corners and joined with 2nos. of 150mm long brackets of 15 x 15mm M.S. Square tube. The two vertical door profile are to be reinforced with 40 x 20mm M.S. tube of 19 guage through out the frame. The doorframe shall be fixed to the wall using 65/100mm long M.S. Screw through the frame by using PVC fastners. A minimum of 4 nos. of screws to be provided for each vertical member & minimum 2 nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge. 4/SR/Bldg - 24 10/SR/Bldg - 25

Mild steel angle iron door frame 40x40x6mm conforming to Fe 410.0 incl.12 mm dia deformed bars( Tie bar) for strengthening at bottom of chowkhat incl.cutting floor to accommodate strengthening bar & making good in PCC(1:2:4) type B0. 4/SR/Bldg - 200 10/SR/Bldg - 20

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position. 4/SR/Bldg - 30 10/SR/Bldg - 10

Cutting holes in stone / brick walls built in CM for inserting hold fast & making good dismantled portion in CM (1:3) depth of embaded portion of holdfast n. exc half brick. 4/SR/Bldg - 15 10/SR/Bldg - 10

35mm thick IInd class hard wood factory made plain, framed, panelled shutter (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & steel as per IS:1003 (Part-I) kiln seasoned & chemically pressure treated. 4/SR/Bldg - 24 8/SR/Bldg - 12 10/SR/Bldg - 8

35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered / rounded fitted without & mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I Section 8 Clause 8.2 (a) supplied & fitted to chowkats. 4/SR/Bldg - 24 10/SR/Bldg - 8

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete. 4/SR/Bldg - 66 8/SR/Bldg - 30 10/SR/Bldg - 42

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section. 4/SR/Bldg - 48 10/SR/Bldg - 20

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, . or extruded sections & fixing bolts & sliding bolts of extruded sections or . aluminium alloy. 4/SR/Bldg - 48 10/SR/Bldg - 4

S&F Aluminium handles 125 mm size, . type, anodised. 4/SR/Bldg - 48 10/SR/Bldg - 30

S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door as directed. 4/SR/Bldg - 24 10/SR/Bldg - 4

S&F MS spring hinges 300 mm, ordinary rat tail rod pattern including roller and roller plate complete fixed to wooden/ angle iron chowkats. 4/SR/Bldg - 12 10/SR/Bldg - 4

S&F galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples all as directed by Engineer- in -Charge. 4/SR/Bldg - 24 10/SR/Bldg - 25

S&Fin repair galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples fixed in repairs complete all as directed by Engineer- in -Charge.

Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer. 4/SR/Bldg - 96 8/SR/Bldg - 30

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome. 4/SR/Bldg - 5 8/SR/Bldg - 520

Demolition of PCC in ground floors and pavings not exc 15cm thickness ( below or above ground level )

Preparing old plastered surfaces including scrapping and applying two coat of white wash on ceiling

M&L for preparing of old paianted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying on coat of synethic enamel paint on wooden surfaces all as specified and directd by Engineer-in-Charge

All as per Srl item No.73 above but one coat of paint on steel surfaces.

M&L for screed bed or bedding layer of cement mortar 1;4:10mm thick for laying floor finishes.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) 4/SR/Bldg - 8 8/SR/Bldg - 5 10/SR/Bldg - 2

All as per item No 76 above but area n exc 1.50 Sqm each. 4/SR/Bldg - 8 10/SR/Bldg - 20

Taking down shutters of any description exc 1.00 sqm but n exc 2.50 sqm each. 4/SR/Bldg - 12 10/SR/Bldg - 10

Aluminium anodised frame fixed type with aluminium section weighing 0.55 Kg/Mtr including necessary joining, , cleats, glazing clips, rubber packing anodised aluminium snap beading, screws etc complete all as specified.

Aluminium anodised window shutter openable / Sliding type with aluminium section weighing 0.55 Kg/ Mtr incl. necessary joining, cleats, glazing clips, rubber packing anodised aluminium snap beading, screws, handle & tower bolt etc complete all as specified

Aluminium anodised Door shutter openable type with aluminium section weighing 0.55 Kg / Mtr incl. necessary joining, cleats, glazing clips, rubber packing anodised aluminium snap beading & screws etc complete all as specified

S&F Aluminium (Diecast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg.

S&F Sheet glass 5.5mm thick, ordinary quality in square as required & directed by Engr - in - Charge

M & L RCC M-25 design Mix (using 20 mm graded stone aggreate) as beam , cantilever, bresummers, linten over 1.5 m span etc complete all as specified and directed

Form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels etc all as specified.

M & L mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking bending and binding with mild steel wire (annealed ) not less than 0.9 dia off confirming to grade Fe 310 all as specified. 4/SR/Bldg - 75 8/SR/Bldg - 75

Ditto all as per item No 86 above but 6 to 8 mm bar as in stirrups. 4/SR/Bldg - 25 8/SR/Bldg - 30

M&L for brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in cm 1:6

Demolition of stone/brick masonary built in cement mortar or cement lime mortar. 4/SR/Bldg - 4 8/SR/Bldg - 2.2

S&F Figured glass 5.0mm thick, pin head type & glazing with oil putty in squares exc 0.5 sq.m in each pane. 4/SR/Bldg - 16 10/SR/Bldg - 4

M&L 19 mm thick MDF Membrane Almirah/kitchen cabnaite door shutter in wood grain colour, half round edge fixed in repair

S & F Auto close hinges,stainless steel, bright finish or electrogalvanised fixed in repair

M&L of 19mm thick MDF board in cabinet almirah cub board and partiation and shelf of cabnait including fixed in repair

S&F brass handle of 100mm size . type, polished bright.

M&L 50 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection. 4/SR/Bldg - 100 8/SR/Bldg - 70

S&F Anodised aluminium window sliding shutter three track way type without sash bars' aluminium sections weighing 0.55 kg/m including necesssary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitttings such as peg stays 150mm long (1No) hinges type B-21 100mm long (2 no) suitable handle (1 no) with complete accessories including glass, wiremesh, anodised aluminium guard bar, Andosided aluminium frame (chawkhats) and all accessories and fittings etc all as deirected by Engr-in-charge Make Jindal/hindalco

08/SR(Bldg)/61SA/20-2021/Q3W Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165. 8/SR/Bldg - 100 10/SR/Bldg - 200

S&F Mild steel barrel tower bolt 150 mm long stove enamelled black with bright bolt

S&F Mild steel pressed handles 125 mm size oval type stove enamelled black

Mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with & including a minimum of 6 bolt & nut four on bolt plate & 2 on staple plate & fixed length of bolt 300 mm

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane. 8/SR/Bldg - 4 10/SR/Bldg - 25

M/L for 75 mm thick PCC type D-2 (1:4:8) using 40 mm graded stone aggregate floor finished fair & even complete all as directed. 8/SR/Bldg - 250 10/SR/Bldg - 10

M/L for 40 mm thick PCC type D-2 (1:2:4) using 20 mm graded stone aggregate as in floor finished even and smooth without extra cement complete all as directed.

Applying two coats of cement base paint white or tinted on old wall surface including preparation of surface

Applying three coats of white wash on ceiling surface including preparation of surface

Ditto all as per item No 21 above but two coats on old surfaces

Dismantling of rolling shutters/ structural steel work of any description complete all as specified

Supply and fixing of 1.25 mm thick rolling shutter without ball bearing as specified including top cover anchoring rod , hasp and stapple and one shop coat of primer , errected in position as indicated complete, with gear operated type with bevel.

Safety lever lock mild steel with 4 levers for rolling shutters

Ball bearings for rolling shutters

Supply and fixing of steel windows with side hung shutter including projecting type hinges with steel handle , and steel peg stay , complete with glazing bars devetailed or welded.

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as directed by Engineer-in-charge.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 40mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement. 8/SR/Bldg - 600 10/SR/Bldg - 180

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions. 8/SR/Bldg - 600 10/SR/Bldg - 180

M&L applying one coat of alluminium paint on surface of any description wood,steel,iron, concrete,brick , stone etc exc 10 cm in width or girth, application of paint shall be as per manufacturers instructions. 8/SR/Bldg - 600 10/SR/Bldg - 160

Supplying only Integral waterproofing compound. 8/SR/Bldg - 100 10/SR/Bldg - 20

Demolition of RCC concrete of any description

RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintle bands and shelves complete all as specified and directed by engr in charge. 8/SR/Bldg - 1 10/SR/Bldg - 1

Form work to sides and soffits of lintle beams / shelves complete all as specified and directed by engr in charge

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4)

M&L Brickwork with subclass `B' bricks, straight or curved on plan any radius in half brick thick wall, built in CM (1:4)

10/SR(Bldg)/61SA/20-2021/Q3W M&L for Two coats of Oil Bound Distemper on newly plastered surfaces of Ceiling over a coat of Birla wall care putty including preparation of surfaces.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces including filling of depressions etc and applying two coats of oil bound distemper of approved tint over a coat of birla wall care putty on wall complete all as directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces including filling of depressions etc and applying two coats of oil bound distemper of approved tint over a coat of birla wall care putty on ceiling complete all as directed.

S&F bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, fixed in repairs

M&L Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms)

S&F stop valve, fancy type, chromium plated of brass with long shank and cup, concealed type, with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed of 15mm bore including taking down old stop valve.

Dismantling of old existing unserviceable WHB glazed and S&F vitreous china wash hand basin white of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets including cutting for and pinning in ends of brackets or erecting stand complete in repairs.

Demolition of old existing unserviceable Indian type WC and S & F vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti-syphonage pipe etc. complete including making good to floor with PCC, Lime concrete bedding.

S&F PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polythelene of low or high density or PVC 32mm dia of make Hindware Cat part SLEEK Plus are equivlent.

S&F 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end. Fixed in repairs

Taking down the existing unserviceable stop valve and S&F stop valve 15mm, . copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F PVC white water storage tank of 1000 ltr capacity triple layered inlcunding disconnecting of existing tanks all as specified

S&F soap dish, vitreous china, white, approximate size 160x160x90mm fixed to plugs with chromium plated (CP) brass screws.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) bends any radius 75mm dia

S&F PVC (SWR) bends any radius 110mm dia

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia

S&F PVC (SWR) vent cowl 110mm dia

M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement

S&F bathroom Glass Shelf fancy type of best quality (as per sample)

Aluminium Powder coated frame of size 50X40 for fixed type glazing and openable shutter with aluminium section weighing 0.55 Kg/Mtr incl. necessary joining, cleats, glazing clips, rubber packing powder coated aluminium snap beading, screws etcand beading for fixing of galvanised wire wire mess complete all as specified

Aluminium powder coated window shutter openable/ sliding type with aluminium section weighing 0.55 Kg/ Mtr incl. necessary joining, cleats, glazing clips, rubber packing aluminium powder coated snap beading, screws, handle & tower bolt etc complete all as specified

M&L for preparation of old decorated plastered/ unplastered Surfaces of edges, facia & projection etc and applying two coat of weather based paint of approved shade upto two storey building and scaffloding arrangement all as specified and directed by Engineer-in-charge.

M&L of 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed.

EM Portion: 10/SR Bldg/20-21 Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete including all fittings such as switches, ceiling roses, pendants, sockets, lamp holder, brackets light fittings tube light fitting, bell/ buzzer ,regulator etc (excluding fans) and making good disturbed surfaces of wall floors, ceiling etc complete all as specified and as directed by Engr-in-Charge to match with existing surface. 10/SR Bldg/2020-21 : 174 8/SR Bldg/2020-21 : 72 4/SR Bldg/2020-21 : 180

M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable enclosed in and including non mettalic PVC rigif medium grade conduit concealed in wall with all accessories ISI marked, including MS sunken box concealed to wall/ wooden terminal box fixed on wall 3 mm thick phenolifc laminated sheet top cover fixed or suitable cover for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings

(a) One light/fan/ bell point controlled by one, one way switch. 10/SR Bldg/2020-21 : 114 8/SR Bldg/2020-21 : 48 4/SR Bldg/2020-21 : 124

(b) One 3 pin 5 Amp socket outlet on the same board with other switches. 10/SR Bldg/2020-21 : 10 8/SR Bldg/2020-21 : 8 4/SR Bldg/2020-21 : 20

(c) One 3 pin 5 Amp socket outlet on independent board with other switches. 10/SR Bldg/2020-21 : 36 8/SR Bldg/2020-21 : 8 4/SR Bldg/2020-21 : 20

(d) One light point controlled by two, two way switches. 10/SR Bldg/2020-21 : 2

All as per Item No 149 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 1.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly. 10/SR Bldg/2020-21 : 14 8/SR Bldg/2020-21 : 8 4/SR Bldg/2020-21 : 10

All as per Item No 149 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly. 10/SR Bldg/2020-21 : 4

S&F switch, piano flush type 230/250 volts (Make ; Anchor or equivelent model in kinjal/bajaj/Phillips)

Single pole, one way 5 Amp rating 10/SR Bldg/2020-21 : 160 8/SR Bldg/2020-21 : 64 4/SR Bldg/2020-21 : 160

Single pole, one way 15 Amp rating 10/SR Bldg/2020-21 : 18 8/SR Bldg/2020-21 : 8 4/SR Bldg/2020-21 : 10

Bell push 6 Amp rating 4/SR Bldg/2020-21 : 4

S&F Socket outlet, piano type 230/250 volts :- make: Anchor/kinjal/bajaj

Socket 05 Amp rating Make- Anchor Cat pt No-14304

Socket 15 Amp rating

M&L Ceiling rose surface bakelite 65x50mm, three terminals.Make Anchor/Legrand/Crabtree 10/SR Bldg/2020-21 : 52 8/SR Bldg/2020-21 : 48 4/SR Bldg/2020-21 : 120

S&F Lamp holder insulated body with back plate for batten fitting.

Supply and fix fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, 100 watts mini rotary type all as specified and as directed.

Supply & fix BATTEN, LED Light fittings 1 x 20 W ,240 volt( size-4 feet/1136 mm) long life, surface/wall mounting IP 20, luminaire per watt (Minium) extruded alluminium housing with frosted PMMA diffuser with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Siska CAT part No SSK-T5-22W or equivelent model in Bajaj/Wipro/ Philips/CG /Surya roshni

Supply & fixing LED batten fitting 10 W (2 Feet) compact apprearance, simple and versatile in nature , IP 20 with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Crompton cat pt No- LCTLN-10-CDL or equivelent model in Bajaj/Havells/ Philips/Wipro/Siska /Shakti fixture

M&L for Sub main wiring with two runs of 6 Sqmm single core FRLS PVC insulated but in unsheathed multi stranded copper conductor cable 1100 volts grade drawn through and including of 25mm dia PVC rigid conduit medium with conduit accessories and fixed to the surface of wall/ceiling as per ISI including 4.0 Sqmm PVC insulated copper conductor earth continuity wire. 10/SR Bldg/2020-21 : 120 8/SR Bldg/2020-21 : 35 4/SR Bldg/2020-21 : 100

S&F Factory made, sheet distribution boards, double door protection class IP-42 suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 r of the under mention rating

SP&N12 ways

TPN DB 4 way

S&F MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

SP 5 to 32 amps

SPN 32 to 63 amps.

S&F MCCB 100 amp, 10 KA compete all as specified and directed

Supply & fix Exhaust fan 300 mm sweep 220/240 Volts steel body 1400 RPM including three core PVC nsuated multistranded copper consuctor cable of Size 1.5 Sqmm from ceiling rose/ connector to fan complete all as specified and directed

Supply and fix Louver made of galavnised iron 300 mm including fixing with suitable fastner complete all as specifed and directed

M & L for cutting round hole of 300 mm dia in exiting stone/ brick wall with suitable drilling eqiupment making good the disturbed surface,plastering the surface with cement motar 1:6 complete and matching the disturbed surface with the existing surface compelete all as specified and directed by engineer in charge

M&L LED bed side lamp, wall mounted with adjustable nech, made up of aluminium, flexible type twisted at any direction complete with power lead all as specification and direction Make : Philips Cat No 30975 2-watt or equivalent in Wipro, Glitz, Havells

Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth for foundation etc or for laying cables n.exe 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in any type of soil. 10/SR Bldg/2020-21 : 28 8/SR Bldg/2020-21 : 32

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in any type of soil. 10/SR Bldg/2020-21 : 18 8/SR Bldg/2020-21 : 20

Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50metre above the starting point. 10/SR Bldg/2020-21 : 10 8/SR Bldg/2020-21 : 12

M & L Sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover. 10/SR Bldg/2020-21 : 8 8/SR Bldg/2020-21 : 10

M&L bricks for protection cover to under ground cable (with old size sub class `B` bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm as directed by Engineer in-charge 10/SR Bldg/2020-21 : 0.90 8/SR Bldg/2020-21 : 1

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of following sizes size

16 sqmm, 4 core. 10/SR Bldg/2020-21 : 130 RM

10 sqmm, 2 core. 8/SR Bldg/2020-21 : 150 RM

Supply and Fix Energy saving & Environmental friendly long life versatile pressure die cast aluminium IP 66 LED security light fitting 45 Watt complete all as specified . Make- CG cat Pt No-LSTP-45-CDL or equivalant in HAVELLS ,Syska, Wipro and Phillips

M&L Earthing complete as per electrical plate No. 5 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly vertically in ground in a pit depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including galvanised iron or steel earth strip 25mm x 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing strip shall be protected by galvanised iron or steel pipe 40mm bore light grade and connected to continuous earth wire on pole / test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel, PCC(1:2:4) pit and 50 mm RCC(1:1/2:3) cover and testing of earthing complete all as specified & tested complete.

S&F RCBOs for earth leackage , overload & short circuit protection 4 pole 300 MA leackage currunt and 63 Amp capacity complete all as specified and directed.

S&F RCBOs for earth leackage , overload & short circuit protection 2 pole 100 MA leackage currunt and 32 Amp capacity complete all as specified and directed.

Supply and fix in repair sheet metal enclosure complete with metallic plug and socket heavy duty moduler type 3 pin (2P + Earth), 32 amp rating single phase 240 volts complete with MCB SP 32 amp “C” series complete all as specified and as directed by Engr-in-Charge.

Supply and fix wall fans 400 mm sweep, copper motor, 50 watt, rated air delivery 70 CMM complete all aa specified and directed Make Bajaj model Esteem or equivalent in Havells, Usha and Crompton

08/SR Bldg/20-21 S&F Socket outlet multipurpose use flush mounting type, 230/250 Volts grade(ISI Marked) on top covers (catered in point wiring above) :-

(a) S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete. 8/SR Bldg/2020-21 : 16 4/SR Bldg/2020-21 : 40

(b) S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete. 8/SR Bldg/2020-21 : 8 4/SR Bldg/2020-21 : 10

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete. 8/SR Bldg/2020-21 : 4 4/SR Bldg/2020-21 : 38

Supply & fixing Energy saving envirnmental friendly, LED Light fittings 1 x 22 W 1200mm T5, long life, corrosion resistant , impact proof,surface/wall mounting IP 20 luminaire with PC housing in opal finish suitable for wet location with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Syska cat pt No- SSK-MU-1801 or equivelent model in Bajaj/Havells/ Philips

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with SPN, 240 volts, 8 ways. ratings & ways. Make - Legrand cat ref no 507611 or equivalent in Schneider or Hager as approved. 8/SR Bldg/2020-21 : 3 4/SR Bldg/2020-21 : 4

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 amp ratings. Make - Legrand cat ref no 408587 to 408595 or equivalent in Hager or Schneider as approved 8/SR Bldg/2020-21 : 18 4/SR Bldg/2020-21 : 24

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of 2 pole 40 to 63 amp ratings. 8/SR Bldg/2020-21 : 3 4/SR Bldg/2020-21 : 4

Supply and Fixing security lights LED 45 W Energy saving & Environmental friendly long life versatile pressure die cast aluminium IP 66 LED Wall mounted Light Luminaries are made of die casted aluminium body and toughened glass cover for uniformlight spread cames LED technology of Britelite. The Lights are equipped with state of the art scrche and lock design, dimensional heat management LED system of Size 45 watt including bracket made out of suitable size of GI medium grade tubing 2 metre long and bent to shape at 120 degree angle at the middle from vertical, fixed with clamps nuts and bolts, washer complete all as specified . Make- CG cat Pt No-LSTS-45-CDL-M or equivalant in HAVELLS ,Syska ,Phillips,Shakti fixture,C &S

04/SR Bldg/20-21 S&F door bell, AC, 240 volts, single pole complete.

Supply & fixing Energy saving envirnmental friendly, LED Light fittings 1 x 22 W 1200mm T5 TL(Aluminum body) long life, corrosion resistant , impact proof,surface/wall mounting IP 20 luminaire with PC housing in opal finish suitable for wet location with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size.

Supply & fixing , LED Light fittings 1 x 8W ,240 volt( size-2 feet/600 mm) T5 TL , long life, corrosion resistant , surface/wall mounting IP 20 luminaire with PC housing in opal finish suitable for wet location with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size.

Supply and fix heavy duty exhaust fan 300 mm size ,220/240Volt steel body, 1400 RPM with mounting ring and louvers.including three core flexible PVC insulated multi stranded copper conductor cable of size 1.5 sqmm from ceiling rose/connector to fan Make:- Havells, Model No- turbo force or equivalent of Bajaj/CG Note:- Old retrived ceiling fans sholud be deposite in MES storeyard.

Supply & fix MCB DB TPN 4 ways vertical type with sheet steel enslosure double door fitted with DIN channel TP 200 Amps copper bus bar neutral earth link suitable for TP/SP MCBs as out going 3 Phase 415 V .

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of TPN 100 Amp ratings.

UNIVERSAL INFRAPROJECT PVT LTD

J.J.ENGINEERING