REPAIR AND REPLACEMENT OF BARBED WIRE FENCING AND IRON WATCH TOWERS AT SALIYARCHATTA UNDER GE(AF) JAMMU.

Amount

Dismantling fencing wire mesh/ barbed wire any type, in any position& description complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry, complete all as specified and as directed. Note:- Contractor shall ensure that angle as dismantled taken out with utmost care so that only PCC is broken and angle be later reused after necessary fabrication such as punching, drilling etc. (punching, drilling cutting holes for nut and bolts for flat iron will be paid in respective item of this sch) in fencing. The cost of dismantling of PCC is deem to be included in unit rate.

Fixing only angle retrieve from item No - 02 above for posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165. complete all as specified and as directed. Note:- cutting holes for nut and bolts for flat iron and for fixing extra angle for making 'Y' shape on top of angle iron post is deem to incl in unit rate. Note:- (Elecricity shall be arrange by contractor only,

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & in hard/dence soil, complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & in soft/disintigrated rock, complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & in hard rock complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/disintegrated rocks complete all as specified and as directed.

M&L PCC type B-2 1:2:4 (using 40 mm graded stone aggregate ) in foundations, filling and mass-concrete complete all as specified and as directed.

M&L for RCC M-25 Design Mix (using 20 mm graded stone aggregate) as in plinth beam, bottom beam etc including provn of anchoring as requried at site complete all as specified and as directed by Engr-in-charge.

M&L TMT bars (Fe 500),10mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

All as per above Srl Item No. 09 but 5 mm dia and over upto incl 10 mm dia as in stirrups.

M&L for formwork to sides and soffits (if any) of concrete as in beams, rafters, plinth beams etc, complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed 100 mm dia bore in any length with rubber ring joints laid in trenches or floors or for drainage under path or in beam as water drainage complete all as specified and as directed.

S&F mild steel angle iron as in post and strust , in fencing including cutting tops to shape as directed, drilling holes for wire , etc , flat iron fillet for securing wire mesh including provn of Y section on old angle retrieve from item No-2 inculding necessay welding/bolting etc complete all as specified and directed by Engr-in-charge. Note:- Elecricity shall be arrange by contractor only,

S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, n exc 5cm long dia of shank 11 to 15 mm complete all as specified and directed by Engr-in-charge.

Fixing only chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed by Engr-in-charge.

Supply only chain link fencing including line wires, mesh, size 75x75x4mm, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed by Engr-in-charge. Note: BOO will decided the weight of chain link fencing per Sqm weight. the get approved by GE before procurment.)

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed by Engr-in-charge. (each line wire to be measured)

S&F,concertina coil fencing with punch tape concertina coil 600mm dia, strached to 6.0 meter length, having 50 nos sprial turns per 6.0 meter length, spring core wire (2.59mm thick) of high rensile strength of 1620 N/sqm with tape (0.52mm thick) hot dip galvanised upto 20 micros and weight of each coil 7.5 to 8.0 Kg and fixing the same on Y shaped angle iron 8 horizontal R.B.T ( Reinforced barbed tape ) stud tied with GI staple sand GI clips to retain horizontal clips shall be @5 Nos per 2 sprial turns approximate 125 clips per coil including necessary bolts cinokete aklk complete all as specified and directed by Engr-in-charge. Note: BOO will decided the weight of concertina coil per RM weight. (for measurement purpose overall lenght of the wire shall be measured) the get approved by GE before procurment.)

Dismantling of plain or corrugated sheeting any gauge , thickness including nainital or similar pattern in roof covering, complete all as specified and directed .

S&F pre-painted galvalume aliminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .

S&F Rolled mild stee Fe 410 -W (Gde E-250 Quality A) Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, complete all as specified and directed .

M&L for preparation of old steel surfaces exc 10cm width or girth and applying 2 coats of synthetic enamel paint complete all as specified and as directed.

M&L preparation of newely/old (previously unterated surfaces) steel surfaces exc 10cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

Removing Excavated soils not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point. complete all as specified and directed .

S&F 5 mm thick sheet glass ordinary quality and glazing in squres but exc 0.50 sqm in each pane complete all as specified and directed .

Labour for carefully removing the concertina coil of any dia at any location, securing safely at the other location as shown by Engr-in-Charge and re-fixing / replacing the same after carryout necessary repair to fencing, etc complete all as specified and directed .

Mehar Enterprises

SUNIL KUMAR SANGEET KUMAR AND SONS

M/S KIRAN CONSTRUCTIONS

Bidder Name

M/S KIRAN CONSTRUCTIONS

SUNIL KUMAR SANGEET KUMAR AND SONS

Mehar Enterprises

NATIONAL TRADING COMPANY