SPECIAL REPAIR TO BLDG NO P08 EE ROOM AND P-09 POWER HOUSE AT 727 SU AF AT 1 WG AF SRINAGAR

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, complete all as specified and directed.

Material and labour for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Material and labour for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement including water proofing compound, complete all as specified and directed. Note :- WPC shall be measured & paid separately

Material and labour for 5mm thick rendering on fair faces of concrete surfaces of ceiling in cement mortar 1:3, finished even and smooth without using extra cement, complete all as specified and directed.

Supply only water proofing compound, complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of exterior weather proof paint (apex) over a coat of primer, complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

Material and labour for complete removal of existing treatment from the old plastered, pointed/concrete wall surfaces by washing, rubbing down the painted surfaces and applying three coats of white wash, complete all as specified and directed.

Material and labour for complete removal of existing treatment from the old plastered, pointed/concrete wall surfaces by washing, rubbing down the painted surfaces and applying two coats of exterior weather proof paint, complete all as specified and directed.

Material and labour for complete removal of existing treatment from the old plastered, pointed/concrete ceiling surfaces by washing, rubbing down the painted surfaces and applying three coats of white wash, complete all as specified and directed.

Taking down chowkats or frames without taking off shutter from frame not exc. 1.50 sqm, complete all as specified and directed.

Supply and fixing for aluminium frame for doors, windows, ventilators with powder coating (minimum thickness of powder coating 50 micron) of any colour, with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

Supply and fixing for 3 mm thick sheet glass,ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane, complete all as specified and directed.

Material and labour for aluminium grill powder coated (minimum thickness of powder coating 50 micron) and fixing over U channel as per pattern,complete all as specified and directed.

Material and labour for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of red oxide primer, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, etc, complete all as specified and directed.

Supply and fixing GI clip-in perforated/plain false ceiling system with steel tile of size 600 mm x 600 mm and 0.5mm thick, to be laid in true horizontal level suspended on regular modified polyester coated galvanized steel T - grid (z-120 gms minimum, total zinc coating mass of both sides, 240 mph yield stress). Frame work comprising of main T-runners of size 15x32mm of length 3000mm, cross - T of size 15x32mm of length 1200mm and secondary intermediate cross- T of size 15x32 mm of length 600mm to form grid module of size 600x600mm, galvanised iron wall angle of size 24x24x0.4mm of length 3000mm to be fixed on periphery wall/partition.Frame work to be fixed with ceiling/truss by suspender using galvanized steel clip -in-profiles of size 38mm x 20mm, 4mm rod galvanized 80 GSM, SS butterfly clip 80x30x0.8mm and L- type level adjuster of size 85x25x2mm. The fixing arrangment shall be all as per manufacturer's instructions and section of frame work mentioned shall not be less than of size mentioned in item. (Makes :- ARMSTRONG, HUNTER DOUGLUS, HI STEEL, SAINT GOBAIN, DURLUM)

Supply and fixing in repairs 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame , complete all as specified and directed.

Supply and fixing solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame , complete all as specified and directed.

Supply and fixing plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads, exc 13 sqcm but n exc 25 sqcm for 2nd class soft wood, complete all as specified and directed.

Material and labour for prepration of old wooden surface of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for prepration of old steel and iron surface of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Material and labour for 25mm thick cement concrete type B-1, 1:2:4 (using 20mm graded aggregate), as in sub base, complete all as specified and directed.

Material and labour for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed or bedding layer in cement mortar (1:6) for laying floor, complete all as specified and directed.

Material and labour for coloured glazed ceramic tiles in vertical surfaces 350X250X7mm/ 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over & including 10 mm thick screed bed or bedding layer in cement mortar (1:4) to receive wall tiles, complete all as specified and directed.

Material and labour for removing existing damaged linoleum flooring from floor surfaces, complete all as specified and directed.

Material and labour for 3.20/3.30mm thick linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting sealed down with approved adhesive, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and pointed in any mortar, complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick as in flooring/skirting over & including 20 mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed wiith pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Supply and fixing 15 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Supply and fixing for 20 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Material and labour for lagging to 20mm dia pipes, all around with 25mm thick bonded mineral wool pre-formed `snap on' pipe sections of density 144 Kg/cum confirming to IS 9842,complete all as specified and directed.

Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Supply and fixing in repairs waste coupling of CP brass (half or full threaded), minimum weight 45gms, suitable for discharge pipe of 40mm bore dia complete all as specified and directed.

Supply and fixing in repairs waste pipe 40mm fixed to sink, complete all as specified and directed.

Supply and fixing in repairs grating doom 100mm dia of CP brass (minimum weight 25gms), complete all as specified and directed.

Supply and fixing in repairs 15mm size PVC connections with brass nuts of length 600mm, complete all as specified and directed.

Supply and fixing in repairs CP stop valve/angle valve of 15mm bore, cast copper alloy screwed pressure with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed, complete all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including hoisting, connecting dismantling existing tank and removing to store, complete all as specified and directed.

Material and labour for ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20mm complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc including cleaning or refixing or removal to store, complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, and removal of debries from site,complete all as specified and directed.

Dismantling timber scantlings in unframed work 40sqcm and over in section, in any position, complete all as specified and directed.

Supply and fixing pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixing pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour as in ridges, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for MS work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410- W (Gde- E-250) quality-B, complete all as specified and directed.

Supply and fixing plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe-410-W (Gde-E-250) quality A, complete all as specified and directed.

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long & diameter 16 to 20mm, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Material and labour for cement concrete 1:2:4, type B1 (using 20mm graded aggregate), as in roof kerbs or mud stops, padding rounded or chamfered on edges, complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded aggregates), as in plinth protection, finishing the surface even and smooth without using extra cement, complete all as specified and directed.

Material and labour for PCC 1:2:4, type B-2 (using 40mm graded aggregate) foundations, filling and as in mass concrete, pedestal etc, complete all as specified and directed.

Taking down copper/aluminium point wiring (light,fan,socket & power) including fixtures and fittings such as switches,ceiling rose,pendent holdes,regulators,sockets,light fitting etc and making good disturbed surface of wall,floor etc complete all as specified and directed.

Material and labour for Point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulator etc complete all as specified and directed. for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

One light/fan point controlled by one way switch 6 amps 240 volts

one 3 pin 6 Amps switch socket outlet point on independent board

one 3 pin 6 Amps switch socket outlet point on same board

Material and labour for Point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets 16 Amps, 240 volts :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

Supply and fixing for modular one way switch 6 Amp 240 volt marked light/fan suitable for one model etc complete as specified and directed.Make- Legrand/ Anchor/ Havells.

Supply and fixing for Modular 6 Amp 5 pin universal socket suitable for two model , 250 volts complete all as specified and directed Make Legrand/ Anchor/ Havells.

Supply and fixing for modular switch one way 16 Amps 240 volts suitable for one model complete as specified and directed by Engr-in-charge Make- Legrand/ Anchor/ Havells.

Supply and fixing for Modular 6/16 Amp socket suitable for two model , 250 volts complete all as specified and directed Make Legrand/ Anchor/ Havells.

Supply and fixing for modular step type two model fan regulator suitable for 120 watt 250 volts complete as specified and directed Make- Legrand/ Anchor/ Havells.

Material and labour for ceiling rose with three terminal as per relevant IS complete all as specified and directed Make SSK/havells/legrand /Anchor

Supply and fixing decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 20 watt luminaire complete all as specified and directed.Make:- CG C&S ,Havells ,Crompton.

Supply and fixing for decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 10 watt luminaire complete all as specified and directed.Make:- CG C&S ,Havells ,Crompton.

Supply and fixing for recess mounting LED 36Watt (2'x2') ultra slim ceiling light with extruded aluminium housing and milky diffuser including suitable size driver and 3 core flexible cord from ceiling rose to connector of fitting etc complete all as specified and directed Make : CG C&S ,Havells ,Crompton.

Supply and fixing for recess mounting LED 18watt (1'x1') ultra slim ceiling light with extruded aluminium housing and milky diffuser incl suitable size driver and 3 core flexible cord from ceiling rose to connector of fitting etc complete all as specified and directed Make: CG C&S ,Havells ,Crompton.

Supply and fixing for Energy saving new generation 20 W LED IP 65 bulkhead luminaire with opal diffuser etc complete all as specified and directed Make -CG C&S ,Havells ,Crompton.

Supply and fixing in repair LED flood light 50 watt IP66 high power flood light with pressure die cast aluminium housing with all accessories including 3 core flexible cable from ceiling rose to connector of fitting etc complete all as specified and directed. Make -CG C&S ,Havells ,Crompton.

Supply and fixing epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way TPN (VTP) suitable for MCCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed.

Supply and fixing epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed

Supply and fixing MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incoming & out going controlling system of capaicty 63 Amps 10 KA breaking capacity etc all as specified and directed. Make -CG C&S ,Havells, Legrand.

Supply and fixing for MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incoming and outgoing controlling circuit of capacity 6-32 Amp breaking capacity 10 KA etc complete all as specified and directed Make -CG C&S ,Havells, Legrand.

Supply and fixing for MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incoming and out going controlling circuit of capacity 63 Amp breaking capacity 10 KA etc complete all as specified and directed.Make -CG C&S ,Havells, Legrand.

Supply and fixing MCCB's with fixed thermal and magnetic setting model 125 Amps lcs=100 % lcu 4 pole 16 KA termal magnetic setting Ics 100% lcu 415 V 50 HZ Make -CG C&S ,Havells, Legrand.

Material and labour for sub main wiring in repair with two single core, PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor FRLS cable drawn into and including suitable size non metalic pvc conduit (ISI marked) concealed/surface with all accessories and including one single core pvc insulated multistranded unsheathed 1100 volts grade copper conductor FRLS cable as earth wire of the following size complete all as specified and directed.

2x6.0 sqmm + 1x4.0 sqmm earth wire

4x10 sqmm + 1x6 sqmm earth wire

Disconnecting and taking down serviceable exhaust fan any type, size & any capacity with all accessories from existing place without any damage and refixing the same after oiling, greasing and painting with one coat of synthetic enamel paint after preparation of surface and making full serviceable including replacement of 3 core pvc insulated copper conductor cable from ceiling rose to fan and writing the MES No etc complete all as specified and directed.

Material and labour for exhaust fan 5 star rating heavy duty AC single phase 230 volt 50 HZ of size 450 mm sweep and 900 rmp complete with louvers shutters and connection with 3 core pvc insulated copper conductor cable of suitable size from ceiling rose to connector of fan and grounting of holding down bolt alongwith necessary PCC works and writing the MES No complete all as specified and directed. Make -havells/usha/ketan

Disconnecting, taking down ceiling fan from existing place and refxing the same after replacement of rubber bush, canopy,capacitor 2.5 ,mfd, clip including greasing/oiling painting one coat of synthetic elament paint after preparation of surface, replacement of unserviceable suitable size 3 core copper cable from ceiling rose to connector of fan etc and writing the MES No complete all as specified and directed.

Taking Down the existing down conductor any type and size and refixing the same after B/R works with new suitable size epoxy insulator and testing complete all as specified and directed.

Supply and fixing in repairs Air termination single pointed copper rod not less than 12mm dia and 300mm long including fixing arrangements complete all as specified and directed.

Supply and fixing for copper strip of size 20 x 3.15 mm with saddles and fixing screws, etc., for roof conductors and down conductors above ground including taking down old one etc complete all as specified and directed.

Material and labour for earthing complete with copper earth plate electrode of size 60cm x 60cm x 3.15mm thick buried directly in ground (earth pit not less than 2.25m deep below gound level with top edge of the earth plate not less than 1.5 m below normal gound level connected to copper earth strip of size 25x3.15mm by means of bolts, nuts, check nuts and washers of copper and conneted to main control board as directed and including proivison of concrete pit in PCC (1:2:4) type B1, pre cost RCC earth pit cover reinforced with 8 mm dia TMT bars @ 150mmc/c of size 54cmx54cmx8cm with two handle for lifting made out of 8mm dia MS bar, provision of funnel, wire mesh, 20mm bore galavanised steel tubing (med grade) for watering. Charcoal 250 Kg and salt 200 Kg in alternate layers, 40mm bore galavanised steel tubing light grade for protection of earth lead connection including excavation and earth work and necessary testing complete all as shown on electrical plate No 3 of SSR Part-I Note : Earth strip and protection pipe upto test point i.e upto 7.5 RM is included in the unit rate of this item. Contractor shall quote his rate accordingly.

M/S MIR AND CO

PARVAIZ AHMAD WANI

M/S Abdul Ahad Rather

M/S MUBASHIR SHABIR WANI

M/s Jaipal Associates

nyz infratech