SPECIAL REPAIR TO BLDG NO 89 AND ANIMAL LINE NO 06 STORE ROOMS AT EBS BABUGARH UNDER AGE B/R-II AND AGE E/M-I OF GE (NORTH) MEERUT CANTT

Dismantiling timber scantlings 40 sqcm and over in cross section in any position framed/unframed work and posts similar works complete all as specified and directed

Dismantiling timber scantlings under 40 sqcm in fillets rails ,posts ,rafters, purlins etc complete all as specified and directed

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

Dismantling, Mangalore pattern roofing tiles with ceiling tiles or slate roofing complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 & n exc 4 sq. m each, complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, MS pipes or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions and height of buildings upto 12mtr with out stair case complete all as specified and directed

S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions and height of buildings upto 12mtr with out stair case complete all as specified and directed.

Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed

S&F GI snap grid frame work for false ceiling of size of grid as per requirment all as specified and Hangers 4 mm dia GI adjusting level fixed to steel frame work complete all as specified and directed.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as per manufactures instructions complete all as specified and directed

Demolition of PCC of any description and in any position not otherwise specifically provided for drain etc including removing the same where directed complete all as specified and directed

M & L for PCC (1:4:8) Type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified and directed

M&L for light shed vitrified ceramic tiles 8 to 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 15 mm thick screed ded in cm 1:6 complete all as specified and directed

M&L for light shed vitrified ceramic tiles 8 to 10 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 10mm thick rendering in cm 1:4 all as specified and directed

S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete all as specified and directed

M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed

All as described ser item no 19.00 here-in-before but Extra/less/kg of cement used for cubic metre complete all as specified and directed

S & F for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘A’ complete all as specified and directed

Demolition of brick work built in cement morter including all quoins, arches, pillars etc, complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed

All as described ser item no 23.00 here-in-before but except bricks after cleaning old bricks complete all as specified and directed.

S&F 25mm thick lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick wood grain one side prelaminated colour PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed

M & L for applying 15 mm thick rendering using ready mix plaster bags on brick / concrete surfaces of external/internal walls finished even and smooth as per manufacturer instructions, complete all as specified and directed

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4.00 mm thick plain glass complete all as specified and directed.

M&L for Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed

M&L for cutting holes in brick walls in cement mortar not exc one brick wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed

S&F Hand rails MS , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 GDE Fe 410-W(Gde-E-165)quality B complete all as specified and directed.

S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed

S&F stainless steel butt hinges 100mm in size complete all as specified and directed.

S&F stainless steel anodised barrel tower bolt with bright bolt 200 mm long. Complete all as specified & directed

S&F stainless steel bolt 250mm long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified & directed

S & F Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 125x65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping, bed block, kneels, apex stones etc including weathering slightly rounded or chamfered including form work complete all as specified and directed.

S&F in repairs, 25mm dia, powder coated, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets, complete all as specified and directed.

M&L for complete removal of existing treatment of walls complete all as specified and directed

M& L for preparing plastered new surfaces of wall and applying three coats of white wash on wall surface complete all as specified and directed

M& L for preparing plastered old surfaces of wall and applying two coats of white wash on wall surface complete all as specified and directed

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces using roller for painting complete all as specified & directed.

M&L for preparation of old or previously untreated steel surfaces of any description exceeding 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description exceeding 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH conforming to IS: 694-1990 PVC insulated, sheathed copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, sheathed and connected to common earth and earth dolly in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc,suitable for modular fixtures including suitable modular box, base plate and outer plate including making good to walls, ceiling etc including white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as directed for the following :-

All as described ser item no 47.00 here-in-before but one light/fan/exhaust fan/bell/buzzer point controlled by one, one way 6 Amps switch/bell push button, complete all as specified and directed.

All as described ser item no 47.00 here-in-before but one 3 pin 5/6 amps socket outlet point on Same board, controlled by one, one way 5/6 amp switch.

All as described ser item no 47.00 here-in-before but One 3 pin 5/6 amps socket outlet point on independent board, controlled by one, one way 5/6 amp switch.

M&L for concealed point wiring with 2.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH conforming to IS: 694-1990 PVC insulated, sheathed copper conductor cable including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, sheathed and connected to common earth and earth dolly in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc,suitable for modular fixtures including suitable modular box, base plate and outer plate including making good to walls, ceiling etc including white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified and directed for the following:-

All as described ser item no 51.00 here-in-before but One 3 pin socket outlet, 16 amps, with cables 2.5 sqmm size on independent board, controlled by one, one way 15 amp switch.

M&L for concealed point wiring with 4 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH, conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable FR-LSH ,ISI marked including PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, alongwith frame inner plate suitable for fixing moduler switches, sockets, regulator etc or with 3mm thick plastic laminated sheet top cover concealed in wall any height with and including continuous green earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as directed for one 20 Amps socket outlet on independent board. NOTE: The point wiring shall include the wiring for outlets of any length from the VTPN distribution board to the AC point, whose location will be complete all as specified and directed.

M&L for sub main wiring with 6 Sqmm nominal cross sectional area, two runs, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous one run of earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable, drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces complete all as specified & directed. Note:-One meter of conduit along with two runs of 6 sq mm wire and one run of 6 sq mm earth wire together shall be measured as one unit length complete all as specified and directed.

S&F Modular Switch, 1 Module, 6A, AC, 240V, one way complete all as specified and directed.

S&F Modular Socket, 2 Module, 6A, 2/3 pin combined, AC, 240V, one way complete all as specified and directed.

S&F Modular Switch, 1 Module, 16A, AC, 240V, one way complete all as specified and directed.

S&F Modular Socket, 2 Module, 6A / 16A, 2/3 pin combined, AC, 240V, one way complete all as specified and directed.

S&F ceiling rose, surface type, bakelite, 65 x 25 mm, three terminal complete all as specified and directed.

S&F sheet metal enclosure with single pole and neutral with two pin and earth plug and socket along with a 20 to 30Amps rated SP MCB, 230 volt, 50 HZ as required at site, complete all as specified and as directed.

S&F Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 08 protection, with provision of 125 Amps, 36 kA MCCB. Make- Legrand/Schneider/ABB/IndoAsian with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB'S inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as specified and directed.

S&F MCCB 4 pole,100 Amps 16 KA complete all as specified and directed.

S&F MCB, SP, AC, 240 volts "B" series capacity of 40 Amps, 10kA and making connections complete all as specified & directed.

S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

S&F MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

S&F in repairs Isolator DP, 40A, AC, 240V, complete all as specified and directed.

S&F lamp holder (Angular / Straight), insulated body, with back plate complete all as specified and directed.

S&F LED lamp 9/10 watt complete all as specified and directed.

S&F LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed.

S & F in repairs 36W LED recessed mounted 2'X2' panel light having CRCA sheet housing, PC diffuser, luminous efficacy of 120 lumen/W, CRI > 80, PF ≥ 0.9, CCT 6500K/3000K, independent isolated SMPS based constant current electronic LED driver with THD < 15%,built-in surge voltage protection min 4kV and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, IP 20 protection, input voltage range 140- 270V , input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed

S&F in repairs wal mounting fancy light fitting with polycarbonate diffuser preired incl 9 watts LED lamp complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed

Supplying, laying or fixing, jointing and testing LT under ground electric power cable Crossed linked polyethylene ( XLPE Cable) insulated, galvanised steel strip or wire armoured, ISI-7098 marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of 35 sqmm 3 1/2 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc.( Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,clamps, nuts , bolts, washers and pipe shall be measured and paid separately under appropriate items ).

Supplying, laying or fixing, jointing and testing LT under ground electric power cable Crossed linked polyethylene ( XLPE Cable) insulated, galvanised steel strip or wire armoured, ISI-7098 marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of 16 sqmm 4 core ,complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles/ in ducts /in GI pipes etc.( Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,clamps, nuts , bolts, washers and pipe shall be measured and paid separately under appropriate items complete all as specified and directed.

Excavation in trenches in soft/loose soil n. exc. 1.5 meter wide and n. exc. 1.5 mtr depth and getting out, including trimming the sides and forming bottom surface to required levels for fixing pole/stay assembly and laying/taking out cables complete all as specified and directed.

Returning, filling trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

M & L for Sand cushioning to UG cables (8cm deep before laying of cable and 15 cm deep over the cable complete all as specified and directed. Note :- Punned thickness only will be considered for payment.

M & L for Bricks for protection cover to under ground cable (with standard size fly ash bricks) with width equal to length of brick laid dry and flat abutting each other complete all as specified and directed.

Removing of excavated material (soil) to a distance n. exc. 50 Mtr and dispositing where directed at a level n. exc. 1.50 Mtr above the starting point complete all as specified and directed.

Supplying, installing, commissioning and testing of LT switchgear panel board ( Kiosk) of size not less than 600mmx600mmx500mm, IP-55 (outdoor type) , 415 Volts, 50 Hz, AC supply, three phase and neutral ( 4 wire) , 200 Amps coloured horizontal tinned Aluminium bus bars , factory made out of 3.15mm thick MS sheet structure mounted on rigid mild steel angle iron frame of 50mmx50mmx6mm with 400mm long extended legs grouting in PCC 1:2:4 type B1 of size 150mmx150mmx250mm , duly epoxy powder coated internally and externally with approved shade, rubber gasketted, hinged front double door and back openable doors with proper locking arrangements for dust and vermin proof ,complete including adjustable thermal and fixed magnetic release MCCB 4 pole, 100 Amps, 415V,36 KA,50 hz -01 No (incoming),suitable size cable allay, lugs , glands and making connections/ wiring with suitable size SC PVC insulated copper conductor cable complete all as specified and directed.

S&F ceiling fan complete with blades, down rods, electronic regulator and accessories ,230V, 1200 mm sweep. BEE Five Star rated with Brushless direct current motor (BLDC) complete all as specified and directed.

S&F Wall mounting fan. AC, single phase 230V of size 300mm sweep having motor speed minimum 2100 RPM complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Please Enable Macros to View BoQ information