CERTAIN REVENUE AND MINOR WORKS BOTH B/R AND E/M IN NATURE AT RUPA UNDER GE TENGA

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil complete all specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, pipe, cables, poles etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all specified and directed.

M & L for PCC (1:4:8) type D-2 (40 mm graded stone aggregate) Cement in foundations,filling and mass concrete complete all specified and directed

M & L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and using PCC type C-1, 1:3:6 (20mm graded agg) and setting in cement mortar 1:6 complete all specified and directed

M & L for 15mm thick Rendering on fair faces of brick work or concrete surfaces with CM 1:6 complete all as specified and directed.

M & L for Preparing newly surfaces plastered or unplastered with three coats of white wash on walls complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm,with broken stone or boulderts deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by engr in charge.

M&L for Hardcore of broken stone & boulders of guage exc 63mm but n exc. 100 mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point of any soil complete all specified and directed.

M&L for plain cement concrete 100mm thick type C2 1:3:6 (using 40mm graded aggregate) sub-base, floors and pavings etc complete all as specified and directed by engr in charge

M&L for PCC 40 mm thick type B-1, 1:2:4 (20mm graded aggregate) as in sub-base, floors and pavings etc and finished even and smooth without using extra cement complete all as secified and directed.

M&L for plain cement concrete 75mm thick type C-2, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement. complete all specified and directed

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of Grade A in floors complete all as specified and directed

M&L for PCC 1:2:4 type B-2 using (40 mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all specified and directed.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete as specified.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed.

M&L for preparation of newly steel surface of any description, over 10cm in width or girth,not otherwise described with two coat of synthetic enamel paint over a coat of red oxide primer complete all specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2, (using 40 mm graded granite stone aggregate) in floorings including finishing the surface even and smooth without using extra complete all specified and directed.

M&L Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes with CM1:6 complete all specified and directed

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments complete all specified and directed.

Surface dressing n exc 15 cm deep in soft/ dense soil complete all as specified and directed by engr in charge

M&L for cement concreter Type C1 1:3:6 C1 (20 mm graded aggre), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all specified and directed.

M&L rendering 10mm thick in CM 1:6 on brick or concrete inner surfaces finished even and smooth without using extra cement, complete all specified and directed

Material and labour for rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick or concrete surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & smooth without using extra cement all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid for separetely.

Supply only integrated water proofing compound

M&L rendering 15 mm thick in CM 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed.

M&L for Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over one coat of white wash as complete all specified and directed

M&L for applying two coats of cement base paint over a coat of primer including preparation of newly plastered surfaces.

M&L for Rendering wih CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces to fix the tiles complete all speciffied and directed

Material and labour for 350x 250x7mm or 450x350x7mm thick glazed ceramic tiles coloured set and jointed in neat cement slurry and pointed in coloured cement as in dado of bathroom, toilet and kitchen all as specified.

M&L for PCC 100mm thick, type B-2, 1:2:4 (using 40mm graded sone agg) in sub-floors, sub-base, floors and pavings etc.complete all specified and directed

M & L for screed bed or bedding layer of 15 mm thick for laying floor finishes in CM (1:6 ) complete all specified and directed

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Note :- Colour and pattern will be decided by GE/Engr-in-charge. Contractor will bought the tiles only after approval of colour and pattern of tile by GE/Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of lain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all specified and directed.

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for window, ventilators etc are provided with stiles and rails as specified in SSR Part-1, section 8 clause 8.24(b).complete all specified and directed

M&L for preparation of new or previously untreated wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.complete all specified and directed

Supply and Fixing sheet glass 4 mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.

S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin type B-21, anodised and fixed.complete all specified and directed

S&F 150mm long aluminium anodized, barrel tower bolts extruded section. complete all specified and directed

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised. handle fabricated type. complete all specified and directed

Supply and fix chromium plated brass Bib taps,cast copper alloywith crutch or butterfly handle, screwed down for iron pipe for 15mm bore GI tubing complete all as specified and directed by Eng-in-charge.

S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors. complete all specified and directed

M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm bore pipe complete all as specified and directed

S&F PVC (SWR) bends any radius with access door, 110mm dia.complete all specified and directed

S&F PVC (SWR) bends any radius with access door, 75mm dia. complete all specified and directed

S&F PVC (SWR) junction single, (Single T) equal or unequal of dia110mm. complete all specified and directed

S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches or floors.complete all specified and directed

S&F PVC (SWR) junction single, (Single T) equal or unequal of dia75mm.

S&F PVC Vent cowl of 110 mm dia complete all specified and directed

S&F PVC Vent cowl of 75 mm dia complete all specified and directed

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement. complete all specified and directed

S&F in 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all specified and directed

S&F in 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all specified and directed

S&F PVC connection of 15 mm size with PTMT nuts of length 600 mm.complete all specified and directed

Supply & Fix in vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified.

S&F of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level, white with inlet ball valve float chain and pull and brackets complete all specified and directed

S & F fancy type chromium plated 15mm dia stop valve , cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified

M&L for Reinforced cement concrete type B1 (1:2:4) using 20mm graded aggregate Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by engr in charge.

M&L for flat Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.complete all specified and directed

M&L for Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all specified and directed

M&L for Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.

S&F Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for Iron steps Fe-410-W (Gde.E-250) quality-A orFe 290 (Gde -E-165)complete all specified and directed.

S&F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified complete all specified and directed

S&F 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for bathroom shower and wash basin complete all specified and directed

S&F Gun metal 20mm bore globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.complete all specified and directed

M&L Rendering 20mm thick on fair faces of brick work or concrete surface in cement plaster 1:4, with WPC finished even and smooth without using extra cement complete all as specified and directed.

M&L for Reinforcement cement concrete type B1 1:2:4 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all specified and directed.

S&F of flat Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all specified and directed.

S&F of Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. coFe-410-W(Gde E-250) quality B complete all specified and directed.

M& L for Providing precast ce- ment concrete type B1 1:2:4 (20mm graded aggregate) set in CM 1:4 for landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all specified and directed.

M&L for Loose filling with broken bricks of gauge 80 to 150 mm in soakage pits, soakage wells

M&L for rein-forced cement concrete (Nominal Mix)1:2:4 Type B1 (20 mm graded agg) as in Foundations, including rafts, footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete

S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets and waste pipe complete all as specified and directed

S&F 32mm dia waste coupling of PTMT (half or full threaded). (Minimum weight 32mm- 45gms/40mm-60 gms).

S&F for PVC Low density polyethylene (LDPE) flexible waste pipes 32mm dia of pressure rating 6 kgf/sq. cm for wash basin complete all specified and directed.

S&F of Brass chromium plated shower rose 125mm size incl fixing to steel pipe or union all as specified and directed.

M & L for Roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410W(Gde-E-250) Quality A complete all specified and directed.

M&L precast solid block masonry of block 1:2:4 type B-1 wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.

M&L for Reinforcement cement concrete type B1 1:2:4 in Walls, retaining walls, basementwalls, ballast walls and the like;any thickness; above top of footings; including attachedpilaster and buttresses complete all specified and directed.

M&L for flat Formwork to faces of Baffle walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all specified and directed

S&F steel framed work as in doors or gates of angle or ther section with gusset plates, rails, braces, etc., complete. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all specified and directed.

S&F 0.63 mm thick mild steel, plain, black sheet in wall cladding, steel gate and similar works cut to size, holes punched, incl round headed screw clout nails or rivets and fixed to steel framing work plain 40mm lap joints with rivets or welded scams incl bending or rutning up, mitred angles etc complete all specified and directed.

M&L for 100 mm thick Cement concrete type B-2, 1:2:4 (40mm graded aggregate) and finishing cement concrete surface even and smooth without using extra cement complete all specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation/ and getting out in any type of soil, all as specified and directed.

M&L for 100mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

M & L for PCC (1:2:4) type B-2 (40 mm graded stone aggregate) Cement concrete in surface channels and drains complete all specified and directed.

M&F for providind PCC Type B1 1:2:4 using 20mm stone aggregate, cement concrete in coping complete all as specified and directed

Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH/HRFR), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH/HRFR)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

All as per item No. 98 here in before but for one 3 pin socket outlet 5/6 Amps three pin controlled by one switch on same board with other switches, with cable 1.50 Sqmm size complete all as specified directed.

All as per item No. 98 here in before but for one 3 pin socket outlet 5/6 Amps three pin controlled by one switch on independent board complete all as specified directed.

All as per item No. 98 here in before but for one 5 pin socket outlet 15/16 Amp and 5/6 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated (FRLSH wire) and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.

All as per item No. 98 here in before but for one 5 pin socket outlet 15/16 Amp and 5/6 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire complete all as specified.

S&F Socket outlet 2 in 1, 3 pin, 5/6 amp flush type

S&F Socket outlet 2 in 1, 3 pin, 5/6 and 15/16 amp flush type

Supply & fixing switch piano flush type (ISI marked), single pole, one way 15/16 Amp, 240 Volts complete all as specified & directed.

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5/6 Amp, 240 Volts complete all as specified & directed.

Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.

S&F LED lamp 10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min).

Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, three core flexible copper conductor cable of size from ceiling rose complete all as directed.

S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, Warm/White, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all specified and directed.

M&L for high performance LED flood light fitting of 200Watt power consumption complete,IP 66 input voltage range of 150-240 volt complete all as specified.

Supply and fix exhaust fan, steel body AC single phase 230V of size 300mm sweep with blades and frame and louvers

S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed.

Supply and fix sheet metal enclosures for double door DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.

S&F distribution board vertical type TPN 415 Volt for fixing 4 pole MCCB, double door IP 43 protection, 4 way with copper busbars, neutral links, earth link, earthing studs, blanking plates, interconnection between incomer MCCB and bus bar duly prewired fixed flush to wall/ other surface complete all as specified and as directed.

S&F MCCB, 04 Pole, capacity 100 Amps with ultimate breaking capacity 16 KA at 415 volts with fixed thermal settings conforming to IEC 60947 Part-I/IS-13947 Part-I, (Ics=Icu=100%) in the existing panel with suitable connecting copper terminals at site complete all as specified and directed.

S&F MCB SPN having braking capacity 10KA, 32 Amps, 'C' curve, 240 V complete all as specified and directed.

S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 'C' curve, 240 V complete all as specified and directed.

Supply and fix electric water heater(Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 star rated adjustable temprature setting 0-90 degree C complete with accessories such as safety wall, thermostate, NRV indication lamps, inlet outlet connections,air vent connections, connection pieces including all fixing arrangements such as fastners, bilts, nuts washers etc including making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc)

Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC.

M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particals in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shall be measured 18 cm after punning.

Supplying and laying un-reinforced precast concerete cable cover, class LV, type 1 flat size 250mm x150mm x 40mm for cable protection , laid flat ie length of cable cover shall be laid across the cable, complete casted with PCC 1:2:4 Type B1 using 20mm graded crushed stone aggregateall as specified and directed

M&L for road cutting incl necessary excavation 45 cm wide and 60cm depth as in trenches in any type of soil/rock for laying of LT UG cable through pipe after laying/thorugh the cable trenches will be filling top with PCC 1:3:6 type C-1 using 20mm grade stone aggregate from top over 15cm thick hard good of broken boulders,63mm gauge over 15cm boulders 100mm dia over filled and rammed earth to make good the distuebed surface complete all as directed.

Supply and laying galvanised tube light grade ISI marked of size 50mm dia incl all fittings in trenches/fixed on pole /wall/floor or laid in position complete all as specified and directed.

Supply, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100V grade with stranded aluminium conductor of size 25 sqmm 4 core.

Supply, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100V grade with stranded aluminium conductor of size 35 sqmm 3.5 core.

Supply, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100V grade with stranded aluminium conductor of size 16 sqmm 2 core.

Taking down UG cable from trenches any size /type for replacing etc all as specified and directed.

Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed.

Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 04 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm

S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of size 15mm.

S&F Bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified & as directed by Engr-in-charge.

M&L for PVC connections 15mm size with PTMT nuts of length 450mm for hot and cold water connection complete.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 Core including protection GI/PVC pipe as required complete all as specified.

Supply and laying galvanised tube light grade ISI marked of size 40mm dia incl all fittings in trenches/fixed on pole /wall/floor or laid in position complete all as specified and directed.

S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed FRLSH cable with multistranded copper conductor 4 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 4 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 4 sqmm earth wire and 2 Run of 4 sqmm cable shall be measured as one run.)

Please Enable Macros to View BoQ information