ADDN/ ALTN TO JOINERY WORKS INCLUDING BUILDERS HARD WARE IN BLOCK NO 4, CI PIPES, GI PIPES WORKS IN BLOCK NO 4, 7, 8, 9 AND 25 INCLUDING CONNECTED WORKS AND PVC WATER TANK 2000 LTRS CAPACITY FOR SERVANTS QTRS TO BLOCK NO 01 TO 25 IN MD OFFRS ENCLAVE

Amount

Taking up or down steel tubing and connections including cleaning for refixing or removal to stores with all fittings for 15 mm bore GI tubings complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to stores with all fittings for 20 mm bore GI tubings complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to stores with all fittings for 25 mm bore GI tubings complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store with all fittings for 40 or 50 mm bore GI tubings complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store with all fittings for 80 mm bore GI tubings complete all as specified and as directed.

S&F medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 15 mm bore GI tubings complete all as specified and as directed.

S&F medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 20 mm bore GI tubings complete all as specified and as directed.

S&F medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 25 mm bore GI tubings complete all as specified and as directed.

S&F medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 40 mm bore GI tubings complete all as specified and as directed.

S&F medium grade galvanised steel tubing with all fittings fixed to walls and ceilings or laid in floors for 80 mm bore GI tubings complete all as specified and as directed.

Refixing old steel tubing and connections of 15 mm bore in new or old position ( Walls, ceilings, floors etc) with new fittings etc complete all as specified.

Refixing old steel tubing and connections of 20 mm bore in new or old position ( Walls, ceilings, floors etc) with new fittings etc complete all as specified.

Refixing old steel tubing and connections of 25 mm bore in new or old position ( Walls, ceilings, floors etc) with new fittings etc complete all as specified.

Refixing old steel tubing and connections of 40 mm bore in new or old position ( Walls, ceilings, floors etc) with new fittings etc complete all as specified.

Refixing old steel tubing and connections of 80 mm bore in new or old position ( Walls, ceilings, floors etc) with new fittings etc complete all as specified.

S&F, in repair, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed for 15mm dia pipe (ISI Marked)

-Ditto- as per item No-16.00 but for 20mm dia pipe.

-Ditto- as per item No-16.00 but for 25mm dia pipe.

-Ditto- as per item No-16.00 but for 40mm dia pipe.

-Ditto- as per item No-16.00 but for 80 mm dia pipe.

S&F PTMT ball valves high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25mm dia.

Taking down eaves gutter & rain water pipes ( any size or pattern), incl. all fitting, heads , shoes, bends, swan necks, incl cleaning for refixing or removal to store complete all as specified and as directed.

S&F 100 mm dia cast iron rain water socketed pipes swith cement joints without ears, fixed to vertical surfaces with necessary clamps etc complete all as specified and directed.

S&F 75 mm dia cast iron rain water socketed pipes swith cement joints without ears, fixed to vertical surfaces with necessary clamps etc complete all as specified and directed.

Fixing only 100/75 mm dia cast iron rain water pipes of any description with cement joints with or without ears, fixed to walls (vertical surfaces) with necessary clamps etc domplete all as specified and directed.

S&F cast iron bends or eblows of 100 mm dia pipes complete all as specified and as directed.

S&F cast iron bends or eblows of 75 mm dia pipes complete all as specified and as directed.

S&F cast iron diminishing or short pieces of 100 mm dia complete all as specified and as directed.

S&F cast iron offsets projection upto 150 mm of 75 mm dia complete all as specified and as directed.

S&F cast iron branch piece single "T" type of 75 mm dia complete all as specified.

S&F cast iron offset diminishing or short pieces of 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed, 75 mm bore in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends/Tees and shoes of any radius of 75 mm bore complete all as specified and as directed.

S&F cast iron shoes of 100 mm dia complete all as specified.

S&F cast iron shoes of 75 mm dia complete all as specified.

Dismantling of cast iron pipe in any type of joints and taking out of walls/trenches of 100mm dia pipe.

Dismantling of cast iron pipe in any type of joints and taking out of walls/trenches of 75mm dia pipe complete all as specified and as directed.

S&F cast iron tee single or branch piece ( equal or unequal) ordinary or inverted of 100 mm dia complete all as specified.

S&F cast iron bend ( any radius) diminishing pieces or tapers ( larger bore to be measured) of 100 mm dia complete all as specified.

S&F cast iron tee single or branch piece ( equal or unequal) ordinary or inverted of 75 mm dia complete all as specified.

S&F cast iron bend ( any radius) diminishing pieces or tapers ( larger bore to be measured) of 75 mm dia complete all as specified.

S&F 100mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors.

-ditto- as item No-42.00 above but fixed on walls

S&F 75mm dia cast iron spun pipe soil, waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors .

-ditto- as item No-44.00 above but fixed on walls

-ditto- as item No-43.00 above but except pipes (fixing only using old serviceable pipes after dismantling) including fixed on walls.

-ditto- as item No-45.00 above but except pipes ( fixing only using old serviceable pipes after dismantling) including fixed on walls.

S&F rotational moulded polythene water storage tanks in double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 2000 ltrs incl making connection with fitting for inlet & outlet pipe.

M&L cutting existing steel tubing for alterations or additions ( or lengthening screw on pipe to form connector for bore of pipe 40 or 50 mm complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in roof kerb, mud stops rounded or chamfered on edges and in situations like bases for tanks, raised platforms including all necessary form work etc if required at site complete all as specified and directed.

S&F framed work as in doors, gates, covering boxes of angle iron, flat iron, tee sections or ther section with gusset plates, rails braces etc complete drilled for fixing sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete steel confirming to Gde Fe-410 W (Gde E-250) complete all as specified.

S&F welded steel wire fabric wight n exc 4.00 Kg/Sqm size 150 x 100 mm mesh made of 4 mm dia Galvanised steel wire including Fixing and welding to steel members complete all as specified.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) not exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.50 Sqm but n exc 4.00 Sq m each complete all as specified and directed.

Taking down chowkats or frames not exc 1.50 sqm each complete all as specified and directed.

Taking down shutters of any description not exc 1.00 sq m each complete all as specified and directed.

S&F glazed and gauzed three track aluminium powder coated of not less than 50 micron sliding window of approved colour made of Jindal extruded aluminium window Series 'B' - 18 mm as mentioned below or equivalent in HINDLACO/Indal glazed with 5.00 mm thick glass fixed with rubber beading/gasket and stainless steel wire mesh and aluminium powder coated beading all around and lock type handle of size 75 mm etc complete all as specified and directed :- (a) Outer frame with rectangular section - 14035, frame with bottom section - 20957 and frame top and sides with section - 20958. (b) Shutter : top and side with section - 20606, Interlocking with section - 20605 and bottom with section - 20604. as in windows/ventilators frames/shutters including jointing claeats, glazing clips etc for fixing etc complete with one or more rebates for fixing, etc with suitable handles for operating the window and also making provision for AC opening and openable side hung shutters for AC opening with minimum two Nos of hinges and locking arrangements etc( size of opening shall be decided as per site requirement). Note :- Glass and wire mesh for window shall be measured and paid separately.

S&F powder coated(minimum 50 micron) to aluminum frame for ventilators frames including jointing claeats, glazing clips etc for fixing glass panes with one or more rebates including rubber beading or aluminium anodised beading for glass pnes complete all as specified and directed.

S&F sheet glass ordinary quality and glazing with rubber beading and aluminium beading in squares exc 0.50 sqm in each pane of 5.00 mm thick complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks and wire staples complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work ( table rubbed and polished) in steps, pillars, window cills, cooking plaeforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with the shade of granite including rounding the edges of granite stone complete all as specified.

S&F mild steel framed work(Flat iron, bars etc) as in grills, grating, hold fasts etc with end of bars shouldered and or/riveted for forged into spikes, framed guard bars, barred into iron door, ladders, framed balusteres, walk ways, railings, frame work of water tanks and similar work confirming to Fe 290 Gde. E-165 complete all as specified.

M&L for forming jambs, cills or portion disturbed while taking down of existing windows including cutting toothing and properly bonding into old brick work also facing, jointing and pointing and making good plastering in cement mortar 1:4 to match with the existing surfaces including bring the disturbed surface in geometrical shape/size complete all as specified and directed at site.

M&L for applying two coats of oil bound distemper over a coat of primer over application of wall care putty avg 1.0 mm thick to bring the surface even and smooth on new/old plastered surfaces including match with with existing surfaces and preparation of new plastered or old adjoining surfaces disturbed during replacesment of window, complete to bring the surface to the entire satisfication of Engr-in-charge.

S&F 18/19 mm thick PVC solid both side prelam celluca plyboard for cabinet boxes & shutter , cup boards, showcase etc with shelf and shutter incl lipping to edges of exposed surface incl provn of fixing arrangement.(fixed in repairs) complete all as specified and directed.

M&L for Double aluminium channel size 10x20x2mm, complete all as specified.(fixed in repairs) complete all as specified and directed.

M&L for MS roller with "C" shape stapple, chromium plated for 5.00 mm thick sheet glass, complete all as specified..(fixed in repairs) complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed in repairs complete all as specified and directed.

40mm dia, cup board knobs MS chromium plated with nut, screw and washer complete all as specified.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised ,Width of flap (when open), 40 mm complete all as specified.

S&F Glazing with 5.5mm thick sheet glass, ordinary quality, of any size including grinding of edges for showcase sliding shutter and shelves incl fixing brakets complete .

M&L for Renderning 15 mm thick plastering to brick/concrete surfaces finishede even and smooth with out using extra cement on adjoining surfaces disturbed during taking down of windows complete all as specifed and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in hold fast blocks and similar item of work including necessary form work etc.

Dismantling mild steel, wrought iron work of any description not other wise provided as in grills and similar item of work complete all as specified. Note for Schedule 'A' :- The block No 4 is under occupied state. The scope of work shall be carried out in the occupied state only without disturbance to residents. All necessary safety precaution shall be considered by the contractor while quoting tender.

M/S Sunil Steel Works

SHIVA ENTERPRISES