NIT No. 23 (25-26) Item No. 17

Supply of PVC insulated PVC sheathed, copper conductor(flexible) cable, Size 3 core x 6 Sq mm, 1100 Volts, conforming to IS 694 .Make:- Havells/Finolex/Polycab DJB approved make

Supply of LT power Aluminum cable, solid, XLPE, insulated PVC armoured 650/1100 V-grade as per IS 7908 (Part-I) 1988 size 3.5 x 25 Sq mm. Make: - Havells/Gloster/Polycab/ Any DJB approved make

Supply of 80mm dia. B class GI pipe length 3 Mtr. With duly Welded and threaded flange in both sides, complete with cutting of flange for cable and welded support in both flanges as per site requirement. Make: - Jindal/ Parkash/ Surya/Tata/Jindal Hisar/Jindal Ghaziabad.

Supply of G.I. tail piece medium class of 0.5 mtrs long including one end flanged and another end threaded of 80mm as per site requirement.

Supply of 80mm dia. GI Bend with both side flanges duly welded and threaded as per site requirement.

Supply of M.S. Clamp of MS strip duly hole for holding the pipe of 80mm dia. with nut bolts and washer.

Supply of M.S. Bore cover made out of MS plate suitable for 12" dia. bore complete with suitable hole for passing the 80mm dia. GI Pipe

Supply of Nut Bolts, Washer of good quality as per requirement

Supply of rubber packing sheet with 50 % Neoprene (1.5 mm to 25 mm) ISI Mark. (Payment will be made as per Actual). SOR (E&M) 2025 item code 22.6.1

Fabrication/ Supply of venturi assembly 80 mm dia. with complete accessories as required at site.

Dismantling of LT Panel with allied damaged equipment with the help of tools & tackles and skilled labour.

Supply of Power contactor 32 Amp triple pole with Add on aux contact block. Make L &T/ Havell's

Supply of Power contactor 25 Amp triple pole with Add on aux contact block. Make L&T/ Havell's

Supply of Amp. meter (0-30A) required size digital Type with CT as required. Make L&T/AE

Supply of Indicating lamp set for RYB phase. Make L &T/ Havell's

Supply of Single phase prevent (SSP) Make ;- L &T/ Havell's

Supply of Timer switch digital/Anolog type. Make: L&T / Havell's

Supply of Over load relay thermal type 14-23 A. Make: L &T/ Havell's

Supply of Star delta timer on delay. Make: L&T /Havell's

Supply of 3P MCB 63. Make: L&T/Havells

Supply of rubber mat for electrical purpose of size 1Mx2M and 3mm thick. Make:- Jyoti/ National

Labour charges for repairing of LT Panel with installation of above components i/c electric connection with wiring by using insulating tape & ferrules, testing and commissioning on load.

Supply of electrical dozing pump (4lph, 5.5 kg/cm, supply chemical grade tank of 100ltrs with NRV, Foot Valve with NRV, Injector Valve and tube (pipe) etc Make:- Clormax /Milton Roy / Any DJB approved make.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm (Aluminium 70 sqmm, 3 core cable will be provided by Dept.) (D.S.R 2022 E&M Code No.7.1.1)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required (D.S.R 2022 Code No. 1.8.3) Group C

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm (D.S.R 2022 Code No -1.17.12)

Supply of Endura Linear NEO Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver 36 W LED 857 Make: Havells /Philips/Crompton/ DJB approved make. DJB SOR 2025 Item no. 19.3.3

Workmanship Charges for lowering the submersible pump set one no. in existing bore well, by dismantling the old damaged items and Installation of above E&M equipment, accessories by testing and commissioning on load with satisfactory functioning of Pump. The work includes all sundry required items for completion of work, i.e., eccentric taper, rubber gasket, necessary reinforcement and vibration isolation arrangement, etc. and loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions. The tube well will be commissioned on automation mode and timing to be set as per direction of Engineer-in-Charge. The all-sundry items which are useful & necessary for operation of tube well in automation mode shall be deemed to have been included, whether such items are especially in specification or not.