Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹61,000
Closing Date
28 Feb 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Diwakara D J
Providing additional 11kv switchgears at Kallur Tumakur Division
KPTCL/2023-24/EL/WORK_INDENT663
KPTCL/2023-24/EL/WORK_INDENT663
Open
Electrical
Two Tender Document System(Two Cover)
KPTCL SEE Transmission Works Circle Tumkur
4 documents required · 0 mandatory · 4 optional
Certificate for having executed similar nature of works successfully/satisfactorily issued by an officer not below the rank of an Executive Engineer(Ele)., of an Electrical Utility be uploaded
Agency shall have CA certified an annual turnover of not less than Rs. 1.22 Crore during the preceding two years
No deviation certificate.
Performa of Letter of under taking.
Technical Schedule-I,II & III
Valid Certificate of the registered company/Firm issued by labour department (Form-C)
Self-declaration for Litigation or arbitration with respect to KPTCL contractors over the last two years.
Self-declaration for Risk & Cost
An under taking to source the supply of equipment/Materials from KPTCL approved vender.
Running EPF Copy
Running ESI Copy
Self-Declaration for not black listed by any Govt. organization/Board/Company/any other sector.
PAN Registration Certificate
GST Registration Certificate
The contractor shall posses a valid Super grade Electrical license issued by Electrical Inspectorate Govt. of Karnataka for electrical works.
₹1,520
₹61,000
13 Feb 2024
13 Feb 2024
1 Mar 2024
19 Feb 2024
Providing additional 11kv switchgears at Kallur
Material Portion: Copper Control Cables 1.1KV class PVC insulated Copper control cables with Lugs/ferrules /Glands as per the technical specifications
i) 19C X 2.5 Sq mm"
11KV UG Power Cables
11 KV UG cables 3 core 240 sqmm"
11 KV UG cables 1 core 1000 sqmm
11 KV Heat shrinkable termination kit for 3*240 sqmm XLPE Cable -Outdoor type with aluminium lugs
11 KV Heat shrinkable termination kit for 3*240 sqmm XLPE Cable - Indoor type with aluminium lugs
11 KV Heat shrinkable termination kit for 1*1000 sqmm XLPE Cable -Outdoor type with aluminium lugs
11 KV Heat shrinkable termination kit for 1*1000 sqmm XLPE Cable - Indoor type with aluminium lugs
Station Structure RCC Pole - 9 Mtr Long, 150 Kg WL for DPs
DP Set (2 Pole Strucrure Kit) as per IS-1977 For RCC Pole - 9 Mtr Long, 145KG WL/PSCC Pole - 9
Mtr Long, 300Kg WL - GI
11KV 400 Amps special roaster GOS Complete set
Insulated GOS Operating Rods
11 kV Ceramic Pin Insulator
Pad clamps for Coyote ACSR
Pad clamps for Rabbit ACSR
P.G.Clamps for Rabbit to Rabbit ACSR Conductor
Post Insulators clamp for coyote ACSR
G.I Bolt of various dia and length to complete the work with flat washers, spring washers and nuts as per the directions of site engineer
Danger plates/Caution plates
Braided earth bond 450mm long
9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic typewith Ground Disconnector
Mutli Functional Transducer (MFT) 0.2S class
Opto coupler, 110 VDC for 66 kV sub-station
Current Cables-copper core with 4.0 sqmm cross section multistrand 7 core for CT termination
Voltage cables-copper core with 2.5 sqmm cross section multistrand 4 core for PT termination
Signal/communication cables -Armoured copper core with 0.5 sqmm cross section multistrand 10 core
Control cables-copper core with 1.5 sqmm cross section multistrand 10 core
Signal cable- Armoured copper core 10x0.5 sqmm for MFT communication looping between MFT
LTAC panel (indoor), 415V as per technical specification comprising of voltmeter and ammeter, 1 I/C MCCB 200A + 2 nos. 3-Phase 63A O/G SFU, + 2 nos. 3 Phase 32A O/G SFU 100A + 14 O/G SFU, 6 nos. 3 Pha...
DC distribution panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G
Rubber mats 2000mm X 1000mm X 12mm size tested for 15KV class
Labour Portion: Loading of materials from TL&SS Store
Unloading of materials at S/S
Erection of RCC pole 9 mts long
Erection of DP structure excluding cost of erection of RCC poles including fixing braces insulators etc as per the specifications
Erection of 11 KV 400 Amps Special roster GOS Complete set
Erection of 11KV LAs 9KV,5KA class for DP Structures [Metal Oxide type] 1 set=03 nos
Erection of 11kV indoor switch gear: Erection, alignment and fixing to the foundation, indoor switchgear unit including movement from the point of unloading to the point of erection
11kV indoor switchgear
11kV Announciator panel
Erection and wiring of ACDB&DCDB ACDB
Fabrication,welding etc Market rate
Laying of power cables as directed by KPTCL staff.Cable of size 3C*240sqmm
Cable of size 1C*1000sqmm
Laying of cables from equipments to panels.19C X 2.5 Sq mm
Current Cables-copper core with 4.0 sqmm cross section multistrand 7 core for CT termination
Voltage cables-copper core with 2.5 sqmm cross section multistrand 4 core
Signal/communication cables -Armoured copper core with 0.5 sqmm cross section multistrand 10 core
Control cables-copper core with 1.5 sqmm cross section multistrand 10 core
Signal cable- Armoured copper core 10x0.5 sqmm for MFT communication looping between MFT
Fixing, configuration and comissioning of MFT
Fixing, configuration and comissioning of Opto coupler
Fixing of heat shrinkable potheads for HT Cable3x240 Sqmm
Grounding of equipments by providing cast iron pipes of 100 mm ID ,13mm thickness,2.75 mts long with 2 part clamps out of GI flate 50 X 6 mm continuously welded around the pipe using cast iron welding...
Gronding of equipment with 50X6 mm G.I flat and connecting Equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of holes and connectin...
supplying and providing 450 mm dia, 450 mm hight , 1.5" to 2" thick hume pipe coller ( non pressure type ) for each earth pits including all lead and lifts etc
Supplying and fixing of 2 part wooden clamps with suitable bolt & nut for fixing of UG cable
Providing new name plates with metal stick including printing of letters, painting and welding of stick and board to DPs and earthing pits (2feetX1feet) as per the directions of field engineer
Supply and painting and writing on newly erected equipments, DPs as per the directions of site engineer
Illumination workSupply & fixing of 150 watts LED flood light with operating voltage 90-270 volts confirms to IP65/66 the body which is made up of pressure die cast aluminum with tilting angle of 1...
Construction of 11kV Outdoor switchgear platfrom with shelter as per approved drawings and standard specification measuring 9.375Mtr X 6.50Mtr(3 Span) to accomodate additional 11KV MCVCB panels ( 1I...
Construction of RCC Cable Duct (Control Cable Duct SSY Type-II)as per the approved drawings and specifications As per annexure-2
Construction of RCC Cable Duct (Power Cable Duct:II(0.75Mx 0.75M clear)as per the approved drawings and specif ication As per Annexure-3
Foundations: Design, Engineering, supply of all labour, material and construction of RCC (M20 Grade) footings and pedestals of any section/size including the cost of excavation in all types of soil/ro...
Supplying and spreading 100 mm thick with 20/25 mm jelly with all lead and lifts. 20/25 mm Jelly(20M X 10M X 0.1M=20cum)
Providing and laying Common burnt clay Non Modular bricks class designation 3.5
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
4 letter of under taking of firm.doc
Others - Performa ltr of under taking • 0.03 MB
1 general instructions for bidders Kallur.doc
Others - General instruction for bid • 0.14 MB
5 no deviation certificate.doc
Others - No deviation certificate • 0.03 MB
3 techno commercial bid schedule (i-iii) kallur.xlsx
Techno-Commercial Worksheet • 0.03 MB
NIT of kallur 11kV Feeders.doc
Others - NIT • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .