Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 CrAccepted-AOC | ₹1.4 Cr Quoted ₹1.5 Cr | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹1.6 Cr+₹9.3 L (6.25%)Rejected-Finance 100 GIRISH GHOSH ROAD DONBOSCO LILUAH HOWRAH WEST BENGAL 711202 | HOWRAH | WEST BENGAL | 711202 | ₹1.6 Cr+₹9.3 L (6.25%) | L2 | Rejected-Finance Other than L1 Bidder |
| 3 | L3₹1.6 Cr+₹9.3 L (6.29%)Rejected-Finance UPPER BAGDOGRA PO BAGDOGRA DIST DARJEELING PIN 734014 WB | BAGDOGRA | DARJEELING | WEST BENGAL | 734014 | ₹1.6 Cr+₹9.3 L (6.29%) | L3 | Rejected-Finance Other than L1 Bidder |
| 4 | L4₹1.6 Cr+₹10.2 L (6.83%)Rejected-Finance BEHIND CENTRAL BANK OF INDIA PO KADAMTALA DIST DARJEELING PIN 734011 WB | DARJEELING | WEST BENGAL | 734011 | ₹1.6 Cr+₹10.2 L (6.83%) | L4 | Rejected-Finance Other than L1 Bidder |
| 5 | L5₹1.6 Cr+₹10.6 L (7.15%)Rejected-Finance | ₹1.6 Cr+₹10.6 L (7.15%) | L5 | Rejected-Finance Other than L1 Bidder |
| Sl No | Description | Qty | Unit | CHAKRABORTY AND SONS L5 | M/S JANATA CONSTRUCTION L4 | SHRI S K BHATTACHARJEE L3 | M/S R. K. INDUSTRIES L2 | M/S G D CONSTRUCTION L6 | NEO BUILDERS L7 | M/S SEN CONSTRUCTION L1 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of Asbestos cement or corrugated sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. | 372 | Sqm | 32 ₹11,904 | 30 ₹11,160 Lowest | 37 ₹13,764 | 36 ₹13,392 | 40 ₹14,880 | 41 ₹15,252 | 35 ₹13,020 |
| 2.00 | S&F pre-painted Camouflage pattern trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, as in roof covering/ cladding to wall, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed. | 352 | Sqm | 1,210 ₹4,25,920 | 1,210 ₹4,25,920 | 1,247 ₹4,38,944 | 1,266 ₹4,45,632 | 1,203 ₹4,23,456 | 1,199 ₹4,22,048 | 1,149 ₹4,04,448 Lowest |
| 3.00 | S&F pre-painted Camouflage pattern plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer,as in roof covering/ cladding to wall fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed. | 20 | Sqm | 1,175 ₹23,500 | 1,200 ₹24,000 | 1,237 ₹24,740 | 1,200 ₹24,000 | 1,200 ₹24,000 | 1,189 ₹23,780 | 1,098 ₹21,960 Lowest |
| 4.00 | Making good under cills over arches, lintel and bresummers,including all pinning when nessesary with using cement mortar (1:6) complete all as specified | 16 | Sqm | 380 ₹6,080 Lowest | 450 ₹7,200 | 463 ₹7,408 | 505 ₹8,080 | 468 ₹7,488 | 418 ₹6,688 | 498 ₹7,968 |
| 5.00 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and as directed. | 15.92 | Per Qtl | 570 ₹9,074.4 | 660 ₹10,507.2 | 538 ₹8,564.96 Lowest | 597 ₹9,504.24 | 637 ₹10,141.04 | 646 ₹10,284.32 | 550 ₹8,756 |
| 6.00 | S&F mild steel [Fe 410-W (Gde E-250) quality - A] as in roof trusses (framed), trussed, purlins, Gusset plate and base plates, where connected to common rafters and running rails, distance pieces, cleats, guides for sliding doors; fixed with angle cleats or other connecting plates, framing for cladding, staging for water tanks, nuts, bolts, washers etc,includng welding or riveting etc, complete all as specified and as directed. | 1,592 | KG | 151 ₹2,40,392 Lowest | 160 ₹2,54,720 | 162 ₹2,57,904 | 161 ₹2,56,312 | 157 ₹2,49,944 | 154 ₹2,45,168 | 155 ₹2,46,760 |
| 7.00 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed. | 104.4 | Per Qtl | 678 ₹70,783.2 | 660 ₹68,904 | 690 ₹72,036 | 597 ₹62,326.8 Lowest | 637 ₹66,502.8 | 646 ₹67,442.4 | 650 ₹67,860 |
| 8.00 | S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fasteningand fixing complete confirming to Fe-290(Gde E-165) complete all as specified and as directed. | 6,300 | KG | 162 ₹10,20,600 | 160 ₹10,08,000 | 165 ₹10,39,500 | 161 ₹10,14,300 | 164 ₹10,33,200 | 155 ₹9,76,500 Lowest | 160 ₹10,08,000 |
| 9.00 | S&F mild steel rolled sections [Fe 410-W (Gde E-250) quality - B] as in main and cross beams , hip and jack rafters, purlins, Gusset plate and base plates, where connected to common rafters and running rails, distance pieces, cleats, guides for sliding doors; fixed with angle cleats or other connecting plates, framing for cladding, staging for water tanks, nuts, bolts, washers etc,includng welding or riveting etc, complete all as specified and as directed. | 3,600 | KG | 151 ₹5,43,600 Lowest | 160 ₹5,76,000 | 162 ₹5,83,200 | 161 ₹5,79,600 | 157 ₹5,65,200 | 154 ₹5,54,400 | 155 ₹5,58,000 |
| 10.00 | Supply & Fixing only 1.00mm Mild steel plain black steel sheets in available sizes for steel gates and similar work cut to size holes punched , including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as requried complete all as specified and as directed. | 540 | Sqm | 1,290 ₹6,96,600 | 1,298 ₹7,00,920 | 1,293 ₹6,98,220 | 1,238 ₹6,68,520 Lowest | 1,293 ₹6,98,220 | 1,277 ₹6,89,580 | 1,240 ₹6,69,600 |
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
14 May 2026, 6:00 pmClosed
CWE Bengdubi
Headquarters Commander Works Engineer Bengdubi Post-Bengdubi Distt-Darjeeling (WB) PIN- 734424
SPL REPAIR OF 05 X STORAGE SHEDS ESH-33 AMN 278 AND 279 ESH-34 AMN 280 AND 281 AND ESH-35 AMN 282 AND 283 ESH-36 AMN 284 AND AMN 285 AND ESH-41 AMN-162 AT BENGDUBI MIL STN UNDER GE BENGDUBI
2026_MES_760531_1
8345/B/E8
Open Tender
Civil Works
Item Rate
180 days
Bengdubi
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE BENGDUBI
₹2.2 L
HQ CWE Bengdubi
4 Jun 2026
16 Apr 2026
16 May 2026
16 Apr 2026
14 May 2026
7 May 2026
23 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Dismantling of Asbestos cement or corrugated sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. | - | Sqm | - | - |
| - | S&F pre-painted Camouflage pattern trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, as in roof covering/ cladding to wall, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed. | - | Sqm | - | - |
| - | S&F pre-painted Camouflage pattern plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer,as in roof covering/ cladding to wall fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed. | - | Sqm | - | - |
| - | Making good under cills over arches, lintel and bresummers,including all pinning when nessesary with using cement mortar (1:6) complete all as specified | - | Sqm | - | - |
| - | Dismantling wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and as directed. | - | Per Qtl | - | - |
| - | S&F mild steel [Fe 410-W (Gde E-250) quality - A] as in roof trusses (framed), trussed, purlins, Gusset plate and base plates, where connected to common rafters and running rails, distance pieces, cleats, guides for sliding doors; fixed with angle cleats or other connecting plates, framing for cladding, staging for water tanks, nuts, bolts, washers etc,includng welding or riveting etc, complete all as specified and as directed. | - | KG | - | - |
| - | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed. | - | Per Qtl | - | - |
| - | S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fasteningand fixing complete confirming to Fe-290(Gde E-165) complete all as specified and as directed. | - | KG | - | - |
| - | S&F mild steel rolled sections [Fe 410-W (Gde E-250) quality - B] as in main and cross beams , hip and jack rafters, purlins, Gusset plate and base plates, where connected to common rafters and running rails, distance pieces, cleats, guides for sliding doors; fixed with angle cleats or other connecting plates, framing for cladding, staging for water tanks, nuts, bolts, washers etc,includng welding or riveting etc, complete all as specified and as directed. | - | KG | - | - |
| - | Supply & Fixing only 1.00mm Mild steel plain black steel sheets in available sizes for steel gates and similar work cut to size holes punched , including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as requried complete all as specified and as directed. | - | Sqm | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
8345tender.pdf
Tender Documents • 1.60 MB
BOQ_851879.xls
BOQ • 0.38 MB
amdt17.pdf
PDF • 0.37 MB
dateamdt16.pdf
PDF • 0.19 MB
schofcredit.pdf
PDF • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .