Loading
Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.1 L
Closing Date
16 May 2025, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Important Note :- For Detail Regarding Financial Eligibility Criteria, Please visit Para No 2.2 of INSTRUCTIONS TO TENDERER & CONDITIONS OF CONTRACT of Approved Tender Document.
Technical Eligibility Criteria: The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, OR Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, OR One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Note:-Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. The similar work mean having experience of the following types of works. Electrification / Rewiring of Service or Residential building / Yard / HT / LT substation work / HT / LT cable work / street lighting / platform or building lighting management / circulating area Lighting / Electrical overhead power supply work / Electrical pump work etc. Important Note:- For Detail Regarding Technical Eligibility Criteria, Please visit Para No 2.2 of INSTRUCTIONS TO TENDERER & CONDITIONS OF CONTRACT of Approved Tender Document
12 conditions · 8 needing a document upload
As mentioned in the Tender Document No.PUNE_ELECT_G_2025_02
Copy of PAN Card
Copy of GST registration certificate
Annexure-E
Tender form (First Sheet) as per Annexure-I
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As mentioned in the Tender Document No.PUNE_ELECT_G_2025_02
Tender document with Guidelines, Special conditions & Scope of work and GCC April 2022 with all advance correction slips are attached with tender.
Work-1:-Up-gradation/Modernisation of Infrastructure of Loni Goods shed (Electrical General Portion). Work-2:-Up-gradation/Modernisation of Infrastructure of Sangli Goods shed (Electrical General Portion) Work-3:-Electrical general work in connection with development of Kopargaon Goods Shed with HL cover shed, CGS room and other facilities.
PUNE_ELECT_G_2025_02
PUNE_ELECT_G_2025_02
Open
Works - General
9 Months
Pune, Maharashtra
₹0
₹2.1 L
16 May 2025
24 Apr 2025
305 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 49,52,680.22 | ||
| details. | Item Breakup for | — | — | ||
| Supply of erection of 6 Meter length octagonal pole hot dip galvanized with 130MM bottom A/F & 70 MM top A/F with 1 Meter long hot dip galvanized single arm standard bracket including foundation as per requirement. | — | — | — | 1,39,905.7 | |
| details. | Item Breakup for | — | — | ||
| Supplying and erecting 16 m (clear height) High Mast (Top-150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 8 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per approved specification (excluding luminaries). | — | — | — | 4,57,649.66 | |
| details. | Item Breakup for | — | — | ||
| Making M-20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 16 m raising lowering high mast). | — | — | — | 55,307.9 | |
| details. | Item Breakup for | — | — | ||
| Supplying and erecting 25 m (clear height) High Mast (Top-150mm,Bottom- 540mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 12 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per specification(excluding luminaries). | — | — | — | 12,09,626.79 | |
| details. | Item Breakup for | — | — | ||
| Making M-20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 25 m raising lowering high mast) . | — | — | — | 1,27,256.13 | |
| details. | Item Breakup for | — | — | ||
| Supplying and erecting Outdoor Stand Mounted Feeder Pillar for high mast of the same manufacturer with 63A TPN MCB incomer, single dial timer switch, 45A TP contactor for automatic switching of luminaries, 2 no's 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self-lock, gasket and slanting top erected with CC foundation complete. | — | — | — | 1,44,795.6 | |
| details. | Item Breakup for | — | — | ||
| Point wiring for light point/ fan point/ exhaust fan point/ call bell point in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLS grade copper wire, modular type switch, earthing and required accessories as per specification | — | — | — | 24,447 | |
| details. | Item Breakup for | — | — | ||
| Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E )FRLS grade copper wire, modular type switch, earthing and required accessories as per specification | — | — | — | 10,923.2 | |
| details. | Item Breakup for | — | — | ||
| Wiring for plug on board with Switch socket, copper wiring and earthing as per specification | — | — | — | 1,004.3 | |
| details. | Item Breakup for | — | — | ||
| Supply of materials and wiring of main/submain (both phase & neutral) with 4 mm sq size multistranded FR/FRLS PVC insulated ISI marked copper wire for phase, neutral & one number 2.5 sqmm copper wire for earth continuity with PVC conduit pipe/casing caping as per specification | — | — | — | 3,852 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of flexible PVC copper cable 2 Core X 1.5 sq.mm conforming IS 694 | — | — | — | 3,897 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 1.5 sqmm single core multistranded flexible PVC insulated copper wire | — | — | — | 7,955 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 2.5 sqmm single core multistranded flexible PVC insulated copper wire | — | — | — | 4,374 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of backlit angular/batten/holder or ceiling rose | — | — | — | 1,381.2 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection (including cleating on walls/trusses/pole or laid in provided trench /pipe) of 4 core 10 sqmm, AL conductor, XLPE insulated PVC sheathed armoured 1.1 KV grade cable. | — | — | — | 1,09,232 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection (including cleating on walls/trusses/pole or laid in provided trench /pipe) of 4 core 35 sqmm, AL conductor, XLPE insulated PVC sheathed armoured 1.1 KV grade cable. | — | — | — | 1,22,560 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection (including cleating on walls/trusses/pole or laid in provided trench /pipe) of 4 core 50 sqmm, AL conductor, XLPE insulated PVC sheathed armoured 1.1 KV grade cable. | — | — | — | 2,27,964 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection (including cleating on walls/trusses/pole or laid in provided trench /pipe) of 4 core 120 sqmm, AL conductor, XLPE insulated PVC sheathed armoured 1.1 KV grade cable. | — | — | — | 1,53,210 | |
| details. | Item Breakup for | — | — | ||
| Provision and erection of 2.5 to 16 sqmm LT cable end termination kit | — | — | — | 10,154.25 | |
| details. | Item Breakup for | — | — | ||
| Provision and erection of 25 to 50 sqmm LT cable end termination kit | — | — | — | 2,831.28 | |
| details. | Item Breakup for | — | — | ||
| Provision and erection of 70 to 120 sqmm LT cable end termination kit | — | — | — | 5,196.8 | |
| details. | Item Breakup for | — | — | ||
| Supplying and erecting 2A SP MCB. | — | — | — | 2,816.9 | |
| details. | Item Breakup for | — | — | ||
| Fabrication, supply, erection, testing and commissioning of single sided glow sign board in three languages of different sizes made out of Poly Carbonate sheets as per detail specification. | — | — | — | 29,037.4 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 10 Watt 2 feet led batten fitting. | — | — | — | 1,159.3 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of LED box type fitting with replaceable led tube as per the specification. (1)box type fitting - suitable for 18-20 watt T8/T12 led lamp, including internal wiring, CRCA body, powder coated, (2) LED tube- 18/20watt retrofit LED tube ,complete set. IP 20 protected. | — | — | — | 7,692.4 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of LED street light luminaire 36W, IP 66, housing shall be pressure die casted aluminium alloy with higher thermal conductivity corrosion resistant, powder coated, toughened transparent glass cover, secondary lens optics complete as per specification | — | — | — | 1,53,114.4 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 200 W LED flood light, Ingress protection IP 66 ,High Power LED, pressure dia-cast housing and heat sink in aluminium extrusion ,high efficiency toughened lamp cover, secondary lens optics complete,white colour as per specification | — | — | — | 2,37,315.84 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 350 W LED flood light, Ingress protection IP 65, as per specification | — | — | — | 6,46,062.84 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of Super Efficient Electric Ceiling Fan with Electronic Regulator/Remote for 1200 MM size (48 inch)Three Blades ,power consumption <= 35 watts, in. Air Delivery 220 m3/min,Motor type Brushless DC (BLDC) | — | — | — | 25,935.9 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of single phase, 230 V, 300 mm sweep, 3 blade exhaust fan, metal blade and body of the exhaust fan should be powder coated, approximate speed 1350 RPM. The exhaust fan is to be fixed with required size 6 mm thick plywood frame alongwith required hardware at desired location. | — | — | — | 6,383.8 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of cable junction box 200x160x98mm size with metric knockouts for cable entry with IP 65 protection | — | — | — | 87,587.2 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of distribution board with 63A TPN MCCB & outgoing 4 way per phase with 6-32 A SP MCB's - 12 nos with accessories as per specification | — | — | — | 26,366.98 | |
| details. | Item Breakup for | — | — | ||
| Supplying , erecting , testing and commissioning of Astronomical Street Light Timer with setting of 15 calendar year in weather proof box enclosure in CR sheet 16 SWG, painted, with locking arrangement suitable for Universal time switch with 25 AMP contactor coil voltage 230 volt and 32 AMP, MCB 3 pole having inbuilt short circuit indication (flag) rating 20 A - 32 A for incoming supply, duly wiring for system | — | — | — | 16,671.08 | |
| details. | Item Breakup for | — | — | ||
| Supply and Erection of mini feeder piller board outdoor type with 200 Amps TPN MCCB for incoming and suitable size Al. Busbar and 4 Nos. per phase 63 Amps HRC fuse base with fuse link , connectors,stand etc as per specification | — | — | — | 44,361.75 | |
| details. | Item Breakup for | — | — | ||
| Supply fabrication erection testing and commissioning of LT distribution panels with 250A 02 Nos 4 pole MCCB for incoming and 200Amp 4 pole MCCB 04 Nos and 100 amp 4 pole MCCB 04 Nos and 63 Amp 4 pole MCCB 04 nos for outgoing, LED indicator for each feeder and Multifunction meter for each feeder with required CT. | — | — | — | 2,64,686.01 | |
| details. | Item Breakup for | — | — | ||
| Supply and laying of 50mm OD DWC pipe | — | — | — | 2,21,976 | |
| details. | Item Breakup for | — | — | ||
| Supply and laying of 90mm OD DWC pipe | — | — | — | 34,854 | |
| details. | Item Breakup for | — | — | ||
| Supply, fabrication and erection of MS channel/angle/ flat etc. for cross-arm/clamp etc. | — | — | — | 3,311.4 | |
| details. | Item Breakup for | — | — | ||
| Supply fabrication of GI items (GI pole, Channel, angle, flat, clamps, nut-bots, fan hook, fastener, street light bracket, GI wire Etc.) | — | — | — | 6,142.5 | |
| details. | Item Breakup for | — | — | ||
| Making of cable trench of suitable width and required depth with excavation and back filling of excavated earth in hard soil or soil with concrete/tar layer or track crossing or road crossing portion | — | — | — | 1,64,484 | |
| details. | Item Breakup for | — | — | ||
| Provision of CC 1:2:4 in foundation with 25 mm graded stone along with excavation in hard soil or soil with concrete or tar layer etc. | — | — | — | 11,577.99 | |
| details. | Item Breakup for | — | — | ||
| details. | Item Breakup for | — | — | ||
| — | — | — | 5,596.3 | ||
| details. | Item Breakup for | — | — | ||
| Supply, erection, testing & commissioning of maintenance free & Permanent earthing. | — | — | — | 31,089.3 | |
| Supply and erection of Storage type self-contained water cooler 150 ltrs. capacity with stainless steel body, cooling capacity 150 ltr/hr, suitable to operate on 230 volts 50 hz. AC power supply as per specification | — | — | — | 54,223.16 | |
| Design, fabrication, supply and erection of stainless steel safety cage for water cooler. | — | — | — | 28,568 | |
| — | — | — | 39,97,386.04 | ||
| details. | Item Breakup for | — | — | ||
| Supplying and erecting borewell submersible pumpset of 2.2 KW/3 HP with 415 V, 50 c/s AC supply, suitable for 100 mm dia. borewell ,Delivery Size-40 mm ,Discharge 22 to 100 LPM, Head range 30 to 80 mtrs, conforming to IS 8034 or latest. | — | — | — | 53,076.94 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of ISI marked 3 Core , 2.5 sq.mm, flexible multi stranded flat copper cable ,PVC insulated and sheathed ,suitable to use for submersible pump and conforming to IS-694 latest. | — | — | — | 39,030 | |
| details. | Item Breakup for | — | — | ||
| Supply and erecting Automatic Control Panel for 3 ph, 415 volt, A.C. Submersible/ Centrifugal pump set up to 7.5 HP. Consisting of DOL starter having relay range 9-18 Amp, S.P.P., combined ammeter/voltmeter, phase Indicating lamps enclosed in CRCA powder coated vibration proof encloser with IP 54 protection as per specification. | — | — | — | 19,037.94 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of Nylon rope with 16 MM, 3 Strand, un-spliced, with higher load and breaking capacity and as per IS 4572:2014. | — | — | — | 8,295 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of 50MM diameter High density polyethylene (HDPE) pipe ISI marked , PE grade 63 , PN6 confirms to IS 4984/1995 2008 or latest with required accessories. | — | — | — | 12,095 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of ISI mark " C " Class (Heavy Duty) G.I. pipe of 50 mm dia. with coupling/accessories. | — | — | — | 14,908.65 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of Heavy-duty Non-Return Valve, 50 mm dia. as per IS specification. | — | — | — | 9,733.5 | |
| details. | Item Breakup for | — | — | ||
| Supply and erection of Heavy-duty Sluice Valve, 50 mm dia. as per IS specification. | — | — | — | 10,728.68 | |
| details. | Item Breakup for | — | — | ||
| Supply of erection of 6 Meter length octagonal pole hot dip galvanized with 130MM bottom A/F & 70 MM top A/F with 1 Meter long hot dip galvanized single arm standard bracket including foundation as per requirement. | — | — | — | 3,49,764.25 | |
| details. | Item Breakup for | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .