8901/2022-23/E8

Amount

Taking down chaukhats or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each .

Taking down chowkats with shutter n. exc 1.5 sqm each. (without taking of shutter from the frame) .

S&F 2nd class hard wood (Sal, Hollock) plain, solid straight chowkhats and frames, wrought framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints complete.

S&F 2nd class hard wood (Sal, Hollock) factory made, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets.

Two coats of synthetic enamel paint over a coat of pink primer on new wood or wooden surfaces of any description over 10cm in width or girth not otherwise described including preparation(Make : Goodlass Nerolac Paints, Berger Paint, Asian Paints)

S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters (Sal, Hollock) factory made, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc

S&F 2mm thick composite window with double shutter for glazed and gauzed side in one pressed steel frame including stainless steel wire cloth 0.45mm nominal dia of wire and avg width of aperature 1.40mm and 5 mm thick glass with complete all as specified Note:- measurments shell be taken and paid compositey for frame , glaze and gauged . grill shall be neasured and paid separately

S & F M.S. Flat iron as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc. conforming to Fe 410-0 or F 310-0 complete

M&L PCC 1:2:4 type B-1 (using 20 mm graded aggregate ) as in hold fast.

S&F in repair 3mm thick plain sheet glass ordinary quality and glazing with oil putty or beading etc in square not exceeding 0.5 sqm in each pane

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 150mm long aluminium handles cast type, anodised and fitted.

S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and as directed.

S&F framed works such as grills, grating etc with ends of bars shoulders and/riveted or forged into spikes , framed gaurd bars, barred iron doors, ladders, framed ballusters, walk ways, railings or frame work of water tanks or similar work confirming to Fe-290 Gde-165 complete all as specified.

Dismantling plain or corrugated sheets of any description or thickness and gauge as in roof covering complete all as specified..

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and as directed. (Make TATA or JSW)

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Preparation of new steel surfaces (such as CGI sheet, Window grill ,GI water tube, fencing post etc.) and applying two coat of synthetic enamel paint over a coat of Red oxide zink chrome primer complete all as specified.

Demolition of brickwork or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L for Brick work with sub-class `B' bricks (burnt bricks) , straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified

M & L for 75 mm thick plain cement concrete 1:3:6, type C2, using 20 mm graded stone aggregate) as in plinth protection, path etc laid in alternate bays not exc 3 m in length, and finishing the surface even and fair without using extra cement all as specified and directed.

Taking down cement plaster on brick or stone walls, etc .including raking out joints, hacking for key, scrubing down with water etc .

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified.

M&L for Preparing new plastered surfaces of wall and applying two coats of Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L for Preparing new plastered surfaces of wall by applying two coats of oil bound distemper over 3mm thick wall care putty on walls etc all as specified and as directed

M&L for Preparing old plastered surfaces of wall by Complete removal of existing treatment and applying two coat of premium Acrylic smooth exterior paint with silicone additive of required shade (two coats applied @1.43ltr/10sqm over including priming coat of exterior primer applied @2.20kg/10sqm)

M&L for Preparing old plastered surfaces of wall by washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of oil bound distemper etc all as specified .

Preparation of old treated wood and wood based surfaces including cleaning, stopping and rubbing down of any description over 10 cm width or girth and applying one coat of synthetic varnish complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc all as specified.

Cement concrete 1:2:4 type B1 ( using 20 mm crushed stone agg.) as in floor 40 mm thick as levelling course rough finish to receive top finishes all as specified to recd top finishing complete all as specified.

M&L for screed bed or bedding layer of mortar 1:6 15mm thick for laying floor finishes etc all as specified.

M&L for joint free non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.36sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and directed.

M&L for 10mm thick rendering in cement moratr 1:4 as in backing coat for skirting/dados etc all as specified.

S& F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe..(Make: Jaguar, Parry ware or Cera).

S&F in repair vitreous china wash basin angle back, size 600x480 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and as directed .(Make: Jaguar or Parry ware )

S&F in the wall soap dish, vitrious china white, approximate size 160x160x90 in repairs

Taking up or down 15mm bore steel tubing and connections,including cleaning for refixing or removal to store.

S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.

Taking up or down 20mm bore steel tubing and connections,including cleaning for refixing or removal to store.

S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.

S & F chrome plated brass material 15mm bore Bib cock size 12x7x3 cm minium weight 792 gram Jaquar D'Arc DRC 37037 or equivalent.

S & F in repair chrome pated brass materia width 200mm with faucet wall mounted 15 mm bore Brass CP mixer mixing hot & cold water Jaquar QUEEN'S PRIME QQP-CHR-7217PM Wall Mixer with telephonic shower or equivalent.

S&F in chrome plated Brass material 15mm bore Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses (15mm Cartridge Size) Code :SOL-CHR-6169B or equivalent.

S&F in repair 15mm bore Stop valve fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed bath ends for iron pipe or fixed union and fixed complete all as specified

Grating doom round 140mm size of PTMT (minimum weight 50gms)

S&F Bathroom Cabinet With Mirror wall mounted size of 540x350x130mm Make Jaquar or equivalent.

S&F Vitreous China wash down water closet pan (pedestal pattern) cera brand,Floor mounting EWC Concealed with Carina seat cover 555 x 360 x 400 mm Cat No: S1053108 S Trap or equivalent.

S&F in repairs brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flage.

S&F chrome plated Towel Rack with lower hanger (stainess steel with hook) size 600x250mm make -Jaquer AHS-CHR- 1581H or equivalent.

PVC connection 15mm size with PTMT nuts of length 600mm

Dismantling water tank not exc 500ltr complete all as specified

S & F in repair rotational moulded three layers High Density Poly-Ethylene water storage tanks of capacity 500 litre and conforming to IS, hoisted and fixed in position and removing the old one to store complete all as specified.

S&F of 20 mm bore Ball brass valves, high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Demolition of textile covering including frames (if any) and cover fillets complete all as specified and as directed.

S&F Aluminium anodized snap grid (powder coated) frame work of grid size 605x605mm including hangers 6mm dia GI (upto 1200mm long) for false ceiling including notching and preparing holes, including aluminium cleat/corner pieces and GI 4mm dia suspenders with utterfly clips, wall angle of size 24 x 24mm, main runner (teee) of size 24 x 38mm, cross tee of size 24 x 28mm, (No of suspenders shall be decided by the GE as per actual size requirement) Perforated particleboard/tiles of 12mm thick for insulation and accoustic purposes, as in ceilings flat or sloping 60x60 cm in size complete all as specified and as directed.

Dismantaling framed work timber scantaling 40 Sqcm and over in section in any type

M&L for second class hardwood (Sal, Hollock) in scantlings framed and fixed clean sawn etc all as specified and as directed.

M&L for preparation surface of wood and wood based material new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified and as directed.

S&F for UPVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified.

All as per Serial item No 63.00 above but fixed to wall of 75mm bore pipe

S&F 110 mm UPVC WC connector with lip ring complete all as specified

S&F UPVC (SWR) bends ( any radius ) with duck foot or heal rest for 110mm bore pipe fixed in repair including taking out old fittings complete all as specified.

All as per srl item No 66 above but 75mm bore pipe

M & for Glass Shelf assembly consiting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railling 60CM long

Block boards, grade 2 quality 18/19mm thickness interior grade, commercial type, fixed with screws to timber frame work

UPVC (SWR) branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type ) or with parallel branches for 110mm bore pipe fixed in repair including taking out old fitting complete all as directed with oval access door fixed in repairs.

All as per item 70 above but 75mm bore pipe.

S&F in repairs, self cleaning water jet, chromium plated, Fancey Type high qualitey (Jet Spray)15 mm bore ABC Body mild steel CP with 1.25 mtr ong flexible tube and ABS wall hook including making connections and fixed complete

S&F chome plated ,Brass material Drizzle angle cock 2 in 1 soft brass chrome plated - tow way size 160mmx110mmx110mm (minium weight 900 gram)Jaquar

ROAD/PATH PORTION:-

Demolition of concrete ground floor and pavings n exc 15cm thickness or ground level complete all as specified and as directed.

M&L for cement concrete type C1 1:3:6 C-2 , 75mm thick (using 40mm graded stone aggregate) as in flooring complete all as specified and as directed.

M & L for Sand filling under floors or in foundations including watering and consolidation

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 1:4 15mm thick for laying floor finishes etc all as specified.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25 mm thick , set, jointed and pointed in neat cement slurry as in floor/path etc with grey cement and pigments.

DRAIN PORTION:-

Demolition of Concrete of any description and in any position for drain

M&L Cement concrete 1:2:4 type B-2, using 40 mm graded crushed stone aggregates as in surface channel and drains, complete all as spd.

M&L Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as speciied and directed.

RETAINING WALL PORTION:-

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles

M&L PCC(1:3:6) Type C-2 (40 mm graded crushed stone agg.) as in foundation filling and mass concrete.

RR masonry with best quality locally available stone,uncoursed, well bonded, bedded, solidly hearted and built in CM 1:6 complete all as specified.

All as per item No 88 above but except stones

Extra over stone walling for hammer dressing to face stones and dressing of beds & joints, as specified, of random rubble walling, uncoursed or brought upto courses with max depression on face from straight edge held against the dressed surface not exc 40mm on granite or trap stone complete all as specified

M&L Raised pointing to random or polygonal rubble, uncoursed or brought up to courses in CM 1:4

PCC 1:2:4 type B1 (Nominal mix) using 20mm graded crushed stone aggregate as in coping necessary form work complete all as specified

UPVC pipe 75mm dia low density of pressure rating 10Kg/Sqcm (in short lengths) fixed in walls as weep holes as in retaining wall complete all as specified

M&L Raised pointing to random or polygonal rubble, un-coursed or brought upto courses in cement mortar 1:4

E&M PORTION:-

Taking down carefully existing copper/aluminium point wiring of any type (light/fan/socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per sch of credit) and making good disturbed surfaces of wall, floor, ceiling etc.

M & L for point wiring with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size for one light point controlled by one switch including one run of 1.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in PVC Concealed conduit of approved size and quality ISI marked in Brick machinary/Stone machinary wall complete including cutting, chasing, pinning and making good the disturbed surfaces by using cement mortor 1:3 of wall by providing cement plaster and matching the surfaces by white wash/colour wash all as per existing finishes complete including all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading "Point wiring".fixed on walls/ceiling including modular metal flush box complete all as specified and directed by Engr-in-charge.

All as per item no. 97 but for one fan point, exhaust fan point.

All as per item no. 97 but for one bell point.

All as per Srl item No 97 here in before but for one 5 amps socket out let on same board.

All as per Srl item No 97 here in before but for one 5 amps socket out let on independent board.

All as per item No 97 above but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run of 1.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in cocealed PVC conduit of appropriate size and best quality ISI marked, including suitable size of copper lugs and all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring".fixed on walls/ceiling including modular metal flush box complete all as specified and directed by Engr-in-charge.

Supply & Fixing in replacement Modular switch 1 way 6A, 1 module. Make :-Anchor/Cona/Plaza/SSK

Supply & Fixing in replacement Modular Bell push 6A 1 module Make :-Anchor/Cona/Plaza/SSK

Supply & Fixing in replacement Modular Socket, 6A - 2/3 pin combined 2 module. Make :-Anchor/Cona/Plaza/SSK

Supply & Fixing in replacement Modular switch 1 way 16A,1 module.Make :-Anchor/Cona/Plaza/SSK

Supply & Fixing in replacement Socket 6A/16A - 2/3 pin combined2 module,.Make :-Anchor/Cona/Plaza/SSK

S & F Buzzer, Ding Dong AC. 230 volts,single pole

Supply and fix in replacement ceiling rose 65X50 mm three terminals with back plate complete all as specified. Make :- Anchor / Cona / Plaza / SSK

Supply & Fixing in replacement Modular white cover plate with frame,3 module Make :-Anchor/Cona/Plaza/SSK

Supply & Fixing in replacement Modular white cover plate with frame,4 module Make :-Anchor/Cona/Plaza/SSK

Supply & Fixing in replacement Modular white cover plate with frame,6 module Make :-Anchor/Cona/Plaza/SSK

S & F in replacement defective LED ultra mordern recess mounting luminaire with high brightness SMD LED as light sources, suitable for Armstrong/Grid ceiling. fixture in mm 600X600 of make:- Crompton /Bajaj / Havells / Wipro complete all as specified and as directed by Engr-in- charge.

S & F in replacement of unserviceable tube light fitting with Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate 20 W LED T-5, 4 feet, 6500K ,PVC extruded.Including supply and fixing square Box and all accessories complete all as specified and as directed by Engr-in- charge. Make:- Havells /Wipro /Crompton

S & F in replacement of unserviceable LED mirror lights fitting 1x10 W LED T-5, 2 feet, 6500K,Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate Including supply and fixing square Box and all accessories complete all as specified and as directed by Engr-in- charge. Make:- Havells /Wipro /Crompton

S & F in replacement Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base. including 2 N x 9 W LED Lamp / 2 N x 7.5 W LED filament lamp of Havells Make Cat Part-LHFOAJE2TZ1I060 (Floretine WL 2LS B22 SS) or equivalent to Crompton /Bajaj / Wipro complete all as specified and as directed by Engr-in- charge.

S & F in replacement Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base. including 1 N x 9 W LED Lamp / 1 N x 7.5 W LED filament lamp of Havells Make Cat Part-LHFOAJE1TZ1I060 (Floretine WL 1LS B22 SS) or equivalent to Crompton /Bajaj / Wipro complete all as specified and as directed by Engr-in- charge.

Supply and fixing in replacement LED building security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.Make- Havells/Wipro/Crompton

Supply and fixing street light bracket made out of 32 mm dia light grade GI pipe 1.5 mtr long bent in shape required fixed to pole/ wall with two Nos MS clamps made out of 25x4mm thick flat including nuts and bolts and washer etc complete for fixing of street light fitting including taking down existing.

Supply & Fixing Sheet metal enclosure for TPN DB,s, double door (when MCB,s to be used) triple pole & neutral 4 way with 200 amps rated bus bar 415 volts with fixing arrangements including taking down ICDP/DB's/ kitkat fuse/MCB SPN/SP of any type as directed by Engineer-in-charge.

Supply & Fixing in replacement Sheet metal enclosure for DB,s, double door (when MCB,s to be used) single pole & neutral 8 way with 200 amps rated bus bar 240 volts with fixing arrangements. Make- C&S/Havells/Indoasian/Legrand

Supply and fixing MCB TPN (Three pole & Neutral) 63 Amps 415 Volts all as specified and directed. Make, Havells, Legrand, L&T

Supply and fixing inreplacement MCB single pole and neutral 6 to 32 Amps, 240 volts complete all as specified and directed. Make :- C&S/Havells/Indoasian/Legrand

Supply and fixing MCB single pole 6 to 32 Amps, 240 volts all as spd and directed. Make C&S, Havells, Legrand, L&T

M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, PVC sheathed two run (as phase and neutral) and run 4.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in one PVC concealed conduit wiring in Brick machinary / Stone machinary wall complete including cutting, chasing, pinning and making good the disturbed surfaces by using cement mortor 1:3 of wall by providing cement plaster and matching the surfaces by white wash / colour wash all as per existing finishes complete all as specified and directed by Engr-in-charge.

Supply and fix of single phase wall mounted 230 Volts plastic body complete with all accessories and lovers ventilating fan 230mm including making of hole in any type of wall for fixing of ventilating fan all as specified and directed by Engr-in-Charge. Make:- Havells,Crompton,Bajaj or Philips

S&F in replacement aluminium strip 25 x 3.15mm thick fixed with porcelain/PVC saddles and fixing screws etc with minimum two number saddles with screws on and including PVC gutties in each one mtr of length for roof conductors and down conductors above ground, including removing of aluminium strip complete all as specified and directed.

S&F in replacement Air termination single pointed aluminium rod 12 mm dia 300 mm long fixed including taking out old air termination rod complete all as specified and directed

S&F in Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. head screw complete all as specified and directed by Engr in charge.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to GI earth lead wire of 4.0 mm dia by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work in any type of soil including rocky soil also, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

M&L in replacement for Earthing complete with galvanised steel earth plate electrode 60 X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and inclduing GI Strip 25X4 mm as earthing lead, by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 5 of MES SSR Part I and testing on completion inclduing excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, and cover 6 mm thick in cement concrete (1:2:4) type B1, funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and directed with earth resistance not more than 1.0 OHMS. Note- In case earth resistance more than 1.0 ohms, the contractor wiil re earthing at no extra cost.

Supply & laying XLPE insulated armoured heavy duty electric cable with aluminuin conductor, 1100 V grade, cross sectional area 16 sqmm 4 core.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in any type of soil complete all as directed.

M&L for sand cushioning for cable protection 8 cm below the cable and 15 cm above the cable complete all as specified and directed.

M&L for bricks common burnt old size sub class `B' bricks laid dry for cable protection flat width wise complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5mtr above the starting point.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick in each layers.

M&L GI pipe light grade 40 mm dia for cable protection laid in trench , under road /nalah or under floor wall etc complete all as directed by Engr-in charge.

M & L for sub main wiring with 1.5 sqmm copper conductor cable multistrand, PVC sheathed two run (as phase and neutral) and run 1.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in one PVC concealed conduit wiring in Brick machinary / Stone machinary wall complete including cutting, chasing, pinning and making good the disturbed surfaces by using cement mortor 1:3 of wall by providing cement plaster and matching the surfaces by white wash / colour wash all as per existing finishes complete all as specified and directed by Engr-in-charge.

S & F IP65 Rated LED Bollard with robust design and efficient light distribution including 20cmx20cmx30cm (LxBxH) PCC work complete with fixing arrangement of lifgts of make :- Crompton Cat part No-LBLA1-10-CDL 'MAYA I' or equivailent make in Havells/Wipro/Bajaj/Philips complete all as specified and as directed.

Supply and fixing outdoor type 60Watt Decorative Post top for 360° indirect light with IP 65 protection.Resistant to impact and corrosion.Make - Havells Cat Part-(LPTO-60-WW)

M&L for LED display glow sign PVC board for Dalhousie cantt. and inside the borad moulded letter for writing 100/150 mm hight illuminated after provide to power supply for the board and letters are display on the board for " OFFICERS SINGLE ACCN AND UNIT CSD with direction/arrow mark " on top of the board and '' (AGE(I) DALHOUSIE)'' at the bottom of the board complete with fixing arrangement of the board at the site with suitable size iron frame with 1.5 mtr length two legs including testing after fixing of glow sign board complete with PCC work including complete all as specified and directed by Engineer-in-Charge.

WATER SUPPLY PORTION:-

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in any type of soil complete all as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5mtr above the starting point.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick in each layers.

M&L GI pipe 25mm dia medium grade including complete required GI fittings , such as Tee,Bend, elbow,reducer etc for making new connection including concealing of Gi pipe on wall and connection complete all as specified and as directed by Engr-in -incharge

Cutting of existing pipe line of 25/40 mm size inserting free for making connection of 32mm dia pipe including all required fitting to make connection new pipe line from existing pipe line, complete all as specified and as directed by Engr-in-charge,

Supply & Fixing stop cock cast copper alloy 25mm bore screwed down , high pressure with clutch or duty free handle, screwed both ends for iron pipe complete all as specified and as directed by Enge-in -charge,

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm

M&L for Cement concrete (1:3:6) in foundations, filling and mass concrete.

M&L mild steel work as post and struts in staging including cutting top to shape, drilling holes,notching inc caps, bases, splices etc builtup from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, Fe410-w (Gde-E250 quality A) etc.

M/s. Rishav Sood

malghotra construction co

Pathania Builders

Roshan Lal Thakur

M/S Ajay Kumar Mahajan

M/s Joginder Paul Bhatia

M/s Shakti Electric Works

Havish Construction