SPL REP OF BLDG T72 WETCANT T73 WASHERMAN SHOP ADDL ALTR OF BLDG T03 PROVN OF STONE MASONRY RETAINING WALLP26 INTERLOCKING PATHWAY BLDG NO P46 11 P46 12 JAKLIRTC DHANSAL PROVNOFAIRCONDTRSREFRIGRS DEEPFREZRS TO 509AD MSLREGT AKASH UNDER GE A DHAR ROAD

Amount

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified.

Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.

Brickwork with sub class ‘B’ (except bricks) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, gypsum, POP, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Aluminium anodised snap grid frame work of size 605 x 605 mm for false ceiling including necessary notching. The snap grid shall consist of aluminium anodised main and cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg/Rm and 23.5 x 26.4 x 1.4 mm weighing 0.191 Kg/Rm respectively. The main and cross tee shall be jointed at junction crossing with aluminium anodized angle bracket of size 15 x 15 x1.5 mm weighing 0.12 Kg/Rm fixed with suitable MS bolts, nuts and washers. The snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 40 x 25 x 2 mm weighing 0.36 Kg/Rm fixed to wall with suitable arrangement and providing 4 mm thick Non asbestos fibre cement designer building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

Dismantling of plain & corrugated AC /CGI steel sheeting any gauge, thickness including Nanital or similar pattern roof covering like ridges, hips, valleys and flashings etc complete all as specified.

Dismantling of wood in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 290 grade E-165 complete all as specified.

S&F pre painted galvaliume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified (Make:- Jindal, TATA & JSW)complete all as specified as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exc. 15 cm thickness ( below or above ground level) complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base of floor, finished even and fair complete all as specified and directed.

M & L for 25mm thick sand cushioning for laying of paver blocks complete all as specified and directed.

M & L Machine pressed gloosy finish cement concrete chequered tiles of size 250x250x22mm, jointed and pointed in neat cement slurry with grey cement and pigments to match the colour of fills complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.

M & L for Virified Ceramic tiles 10 mm thick with dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 20 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed.

M & L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing incl screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.

M & L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting, dodo and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing incl screed plaster of 10 mm thick on fair faces of brick work in CM 1:3 complete all as specified and directed.

Excavation over areas not exc. 1.5 m deep and getting out in any type of soil complete all as specified and directed.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc., or for shafts, wells, cesspits, manholes, pier holes etc., not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed

M & L for cement concrete 1: 4 :8 type D 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

Use and waste form work for flat rough finished surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, beams haunching, girders, bressummers, lintels, cantilevers, shelves including supports, over hangs, etc. also splays between floors and beams etc for flat rough finished surfaces of concrete complete all as specified and directed.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200 mm thick (Horizontal or slopping) for flat rough finished surfaces of concrete complete all as specified and directed.

Use and waste form work to chullah hoods, chajjas, troughs and similar items including edges for flat rough finished surfaces of concrete complete all as specified and directed.

M & L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for RCC nominal mix B1(1:2:4) 20mm graded aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like comple all as specified and directed

M & L for Reinforced Cement Concrete M-20 (20 mm graded aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, underreamed piles and mass concrete complete all as specified and directed

M & L for Reinforced Cement Concrete M-20 20 mm graded aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L old size brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 complete all as specified and directed.

M&L Providing Cement concrete Type C1 1 : 3 : 6 (20mm graded aggregate) as in lintels, upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses copings kerbs etc slightly rounded or chamfered angles and throating complete all as specified and directed.

S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S & F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shuttres from frames) area exceeding 1.5 square metre and not exceeding 4.0 sqaure metre each complete.

S&F pressed steel frames of size 125x60mm for doors with one and more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6)(using 12.5mm graded aggregate ,etc complete all as spacified as directed.

S&F factory made 2nd class HW 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and avg width of aparture 1.40mm complete all as specified and directed

S&F in reapair 4mm thick sheet glass ordinary quality and with oil putty in square shape n. exc 0.5 mm in each area panel incl hacking out old broken glass from metal frame incl punching or drilling out old glazing oins / spring clips and glazed with oil putty complete all as specified.

S&F 300 mm ordinay rat tail rod pattern springs incl roller and rabber plate fixed to chowkhats in repairs incl necessary welding if reqd. complete all as specified and directed.

S & F Steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and as directed.

S & F mild steel framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S & F figured glass, 3 mm thick pin head type and glazing with oil putty in square not exc. 0.5 sqm in each pane complete all as specified and directed

M & L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coats of synthetic enamel paint, all as specified.

M&L two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces of any description, over 10 cms in width or girth not otherwise described

S&F in repairs Curtain rod 25 mm dia decorative/fancy type stainless steel with with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories complete all as directed.

S & F 100 mm butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

S & F 150 mm aluminium anodised, barrel, tower bolts of extruded section fixed complete all as specified and directed.

S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F 100 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised, 150 mm size complete

M & L for Reinforced Cement Concrete (Design Mix) M-25 (20 mm graded aggregates) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed

M & L for Reinforced Cement Concrete (Design Mix) M-25 (20 mm graded aggregates) as in Chajjas complete all as specified and directed

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified and directed.

M & L rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 5 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as in ceilings etc. complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for two coats of oil bound distemper on newly plastered wall surfaces over a coat of alkali resistant primer including preparation complete all as specified and as directed.

M & L for Preparing new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint distemper and priming plastered and other surfaces with chalk whiting, preparatory to distempering complete all as specified and directed.

M & L for laying broken stone or boulders hardcore of guage not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick watered rammed and consolidated to a true surface complete all as specified and directed

M & L for 75 mm thick cement concrete 1:3:6 type C 2 (40 mm graded aggregate ) as in plinth protection, finished even and smooth without using extra cement including forming joint to full depth at every 3.0 mtr interval and every change of direction and filled with mixture of bitumen and sand (1:3) by weight complete all as specified and directed

M & L for 75 mm thick cement concrete 1:4:8 type D 2 (40 mm graded aggregate ) as in sub base, finished even and rough to receive the topping layer complete all as specified and directed

M & L 25 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in floors complete all as specified and directed.

M & L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed.

M & L for joint free glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:3 complete all as specified and directed

S & F 100 mm spun cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S & F 100 mm bore of cast iron pipe bends (any radius), diminishing pieces or tapers complete all as specified and directed.

S & F 100 mm bore of cast iron pipe branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S & F 100 mm bore of pipe cast iron cowls complete all as specified and directed

M & L 100mm diameter of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

M & L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) incl priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 primed surface by forced application complete all as specified and directed

S & F rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed in SSR Part-I.

S & F Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified.

S&F grating round 125mm size of PTMT fixed with cement motar.(Min weight 40 gms)

Gate valves, with iron wheel head, screwed both ends for bore of 15 mm pipe and supply and fixed in repairs.

Brass, CP mixer for mixing hot and cold water screwed down for 15mm dia iron pipe and fixed in repairs, complete all as specifed.

S & F 20 mm bore dia of pipe ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min weight 210 gms) of approved make complete all as specified and directed

S & F in bib taps, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified & directed.

S & F stop valve, 15 mm bore dia cast copper alloy, fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified & directed.

S & F 10 litres PVC valveless, syphonic action type, flusing cistern low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm long complete all as specified and directed.

S & F vitreous china wash basin, white, flat back, size 630 x 450 mm incl 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S & F vitreous china urinal, bowl type flat back, size 465 x 355 x 265 mm white (minimum), with grating and union for discharge ppe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed

Vitreous China wash down water closet pan “Pedestal pattern” size 580x440mm white (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc fixed in repairs, complete all as specified.

S & F 100 mm bore floor trap 'P' or 'S' type complete all as specified and directed

S & F 15 mm dia pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed

S & F steel water tubes 15 mm bore, medium grade, galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)

M& L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc., or for shafts, wells, cesspits, manholes, pier holes etc., not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed

M & L for cement concrete 1 : 4 : 8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

M & L for brickwork in cement mortar 1:4 with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius for manholes etc complete all as specified and directed

M & L for cement concrete 1 : 3 : 6 type C-2 using 40 mm graded stone aggregate as in benching/surface channels etc complete all as specified and directed.

M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement mixed with WPC (as per manufacturer's instructions) complete all as specified and directed. Note : WPC shall be measured and paid separately

Supply only integral waterproofing compound complete all as specified and directed.

M & L for cement concrete 1:2:4 type B1 using 20 mm graded aggregate as in coping for manhole incl weathering slightly rounded or chamferred angles complete all as specified and directed

M & L mild steel TMT bars 6 mm to 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for providing precast cement concrete type B1, 1 : 2 : 4 (20 mm graded aggregate) as in cover slabs (for man holes etc) and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed

M & L for 150 mm bore of pipe in concrete bed to drain pipes including including forming cradles in cement concrete 1:4:8 type D-2 complete all as specified and directed

S & F reinforced concrete pipes 150 mm dia bore, class NP2, laid and jointed complete with collars etc all as specified and directed.

Construcution of Septic Tank for 10 users complete all as specified and shown on drg of CEUZ Drg No CE/TD-1202/2003 sheet 1/2 and 2/2 dt 29 Oct 2003

Construcution of Soakage well 1.2M dia x 1.5M deep complete all as specified and shown on drg of CEUZ Drg No CE/TD-1202/2003 sheet 1/2 and 2/2 dt 29 Oct 2003

Surface excavation not exc 30 cm deep and averaging 15cm and getting in any type of soil complete all as specified and directed.

M&L Hardcore of gauge not exc. 63 mm, Broken stone or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L 75 mm thick PCC 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in sub base, floors and pavings etc. Complete all as specified and directed

M&L 25 mm thick Sand filling under floors or in foundations including watering and consolidation for laying of interlocking tiles complete all as specified and directed

Machine pressed precast concrete interlocking paver block with grey cement no pigment any shape and size confirming to IS 15658-2006 of 60mm thick M-35 grade , with grey cement and no pigment complete all as specified and directed

M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping/benching complete all as specified and directed.

Excavation in Post holes (or similar holes) Each not exc 0.5 Cum in any type of soil getting out, returning filling and ramming earth and surplus to a distance n exc 50mep and getting out in any type of soil.

M & L for cement concrete 1 : 2: 4 type B-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

Supply only chain link MS galvanised fencing (wire dia 4mm , mesh size 100x100mm) complete all as specified and directed

MS work as in hand rails, posts and struts in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc conforming to fe 290 Gde E-105 including one shop coat of red oxide primer

S &L Tie bars with screwed ends nuts, washers and mild steel plates for walls, chimneys, roofs arches, etc. king rods and straining bolts conforming to Fe-290 Gde-E-165 complete all as specified and directed

Fixing only chainlink fencing of any dia and any aparature.

M & L for preparation of new undecorated steel surfaces over 10cm girth or width and applying two coats of fire resisting paint over one coat red oxide primer complete all as specified and directed

Excavation over areas not exc. 1.5 m deep and getting out in any type of soil.

M & L for PCC 1: 4 :8 type D 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

M & L for walling of random rubble stone masonary uncoursed well bonded , bedded and solidely hearted built in cement mortor 1:6 etc complete all as specified and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors for providing weep holes complete all as specified and directed.

M & L for hand packing of broken stone or boulders any thickness at the back of wall over arches etc. and raising or lowering to required level complete all as specified and directed

M&L for precast cement concrete Type B1 1 : 2 : 4 (20mm graded aggregate) block masonry with solid blocks exc. 10cm in width and setting in cement mortar 1:4 complete all as specified and directed.

M & L keyed pointing to random or polygonal rubble, uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil complete all as specified and directed

Removing excavated material (soils) not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Taking down Old/ Unserviceable MCB /DBs/VTPN Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed.

Disconnecting and taking down un serviceable light fittings of any description/ capacity complete all as specified.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly as specified.Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.

All as per srl item No 5 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.

All as per srl item No 5 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly.

All as per Srl item No 5 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly.

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and directed by Engr In charge.Make: Havells/ Legrand/ANCHOR ROMA

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and directed by Engr In charge. Make: Havells/ Legrand/ANCHOR ROMA

S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and directed by Engr In charge. Make: Havells/ Legrand/ANCHOR ROMA

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with inner and outer cover strip required module complete all as specified and directed by Engr In charge. Make: Havells/ Legrand/ANCHOR ROMA

S&F electronic step type fan regulator 120 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed. Make- Havells/ Legrand/ Philips

M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge. Make: Havells/ Legrand/ANCHOR ROMA

S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 12 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make:- Havells/ legrand/ Schneider.

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable Make:- Havells/ legrand/ Schneider.

S & F in replacement MCB single pole and neutral 240 volt any rating from 40 to 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable Make:- Havells/ legrand/ Schneider.

M & L for sub main wiring with two run of FRLS PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 4.00 Sqmm FRLS PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments incl PVC conduit medium grade 25 mm dia and PVC insulated copper conductor cable drawing in PVC rigid conduit , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing complete in all respect all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of copper conductor wire Flexible (Multistrand) of FRLS PVC insulated shall be measured and paid as one unit length.

Taking down ceiling fan/wall fan/Exhaust fans (C/F of any size/make), cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring all as specified and as directed by Engr-in-Charge. Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm

S & F Angular Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for light fittings

Supply and fixing LEDBulb 12/15W, 230V,AC suitable for Angular Lamp holder complete all as specified and directed.

S&F Wall mounted LED batten 18/20 Watt with 01 No LED tube rod, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fixing LED luminaire 600 mm x 600 mm, 35/40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S&F switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and as directed. Make -Havells/Cona/Anchor/Legrand

S&F switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all as specified and as directed. Make -Havells/Cona/Anchor/Legrand

S&F socket outlet 3 pin, 6 Amp piano flush type including complete all as specified and as directed. Make -Havells/Cona/Anchor/Legrand

S&F socket outlet, 2 in 1, 3/5 pin 6 / 16 Amp, piano flush type complete all as specified and as directed Make -Havells/Cona/Anchor/Legrand

Supply & Fixing medium step type fan regulator 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directed. Make -Havells/Cona/Anchor/Legrand

Supply & Fixing SPN Distribution Box, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, confirming to IS 13032 & 8623 complete all as specified and directed. Make- Legrand cat no 507611 or eqvts of L&T/Schenider (Electric)

Supply and fixing VTPN Distribution Box with MCCB 63 Amp breaking capacity,16 KA double door of protection grade IP 42, in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, confirming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed.

S&F LED building security light 60 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type all as specified and directed.

Taking down existing ceiling fan serviceable type and deposite MES safe coustedy all as directed after complition of B/R work refixing of ceiling fan including fixing necessary arrangements complete all as specified and directed.

Supply & fix fans ceiling complete 230 V,1200 mm sweep. BEE rated including T/D old ceiling fan and deposit in MES store yard ,fixing arrangement and connection with 3 core flexible copper cable all as specifed and directed . Make- Crompton/Bajaj/Havells

T/D old UNSV XLPE cable any size any type complete all as specified and directed by Engineer-incharge

supply and laying XLPE cable 25X4 core complete all as specified and directed by Engineer incharge

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in hard/dense soil for stay assembly/laying of cable/errection of poles etc complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose

M & L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable complete all as specified and directed.

Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 50 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

Taking down Old unserviceable rusted earthing plates

M&L for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

Cutting the existing GI pipe of 20/25mm dia and reducing to required length in position for inserting new Tees, branches etc.

Supply and Lay GI Pipe Medium Class including fittings of size 20mm

Supply & Fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out Soft/lose soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested,poles, stays , struts have been errected and tested , all as specified.

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

Supply & Install AC hi wall split unit air conditioner Reversible type with minimum 4 Star rating indoor & outdoor unit complete with cordless remote control unit and within built air ioniser and plasma Anti dust filter for better indoor air quality of capacity 1.5 Ton with standard accessories including M S frame work for installation of outer with wall side Make - Voltas. Model No.185V Vertis smart Air Elite gold , or equivalent in Carrier/ Daiken including making reqd hole in wall for passing of cooling pipes/ cable and repair work ton damaged portion of wall ijn CM 1: 4 complete as directed.

Supply and installation of automatic voltage stabilizer single phase,copper winding with input voltage 110 Volt 280 V and output voltage 230 v having time delay relay with voltmeter indicating lamp , ammeter . PT Switch for volt metre with Copper Cable 3 Core Wire of suitable size including top plug of suitable size capacity 5 KVA.Make V-GUARD/ MICROTEK/LUMINOUS .

Supply & Fixing of AC box by sheet enclosure in single pole and neutral fitted with two pin and earth plug and socket complete with one single pole MCB,240volts 20 Amp,'c' series Sheet of suitable rating complete all as specified and directed.

Wiring for connection between outer and inner of split AC with four single core PVC insulated FRLS unsheathed copper conductor cable 1100 volts grade 2.5sqmm size in PVC coduit heavy duty ISI marked with two single core 2.5sq.mm PVC insulated FRLS copper conductor cable as earth lead /signal to connecting to the earth dolly specified .Note :- This item shall only be measured for additional qty of copper tubing if fixed with AC extra to 03mtrs.

M&L for Sub main wiring with two run of FRLS PVC insulated unsheathed flexible copper (multistands) single core of size 4.0 Sqmm 1100 Volts grade and one run of 6 Sqmm FRLS PVC insulated unsheathed as earth (In Greed Colour) , flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments including size copper lugs/ thimble and making good the disturbed surface to match with existing colour (distumber, Oil bound, Samosem etc) complete in all respect all as specified and directed.

Supply and fix double door refrigerators with smart connect ,electric driven (single phase, capacity 210 litres.

Supply and installation of automatic voltage stabilizer single phase with input voltage 110 Volt 280 V and output voltage 230 v having time delay relay with voltmeter indicating lamp , ammeter . PT Switch for volt metre with Copper Cable 3 Core Wire of suitable size including top plug of suitable size capacity 2 KVA.Make V-GUARD/ MICROTEK/LUMINOUS .

Supply and fix Deep freezer glass top 300litres heavy duty deep freezers with robust construction meant for heavy duty use.Glass top deep freezers with robust construction meant for heavy duty use , Lock and key system available .Low emissive toughened glass for clear visibility and less chances of breakage.Temp range Deg c -18 to -22ͦc.

Material and labour for Point wiring complete (for simple and modular type ) with 4 sqmm single core PVC insulated heavy duty ISI Marked,FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC white non metalic PVC conduit Medium grade not less than 20mm dia with all accessories like tee, straight joint, L Bend etc.,concealed on walls, sufrace on ceiling/ floors etc., and including provision of PVC heavy duty Insulated FRLS copper conductor, 2.5 sqmm for earth continuity conductor and connected to common earth dolly complete all as spd and directed. Note :- cover plate with frame and box will will measured and paid separately.

Deduct Schedule of Credit of Rs. (-) 77027.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

M/S SHUBAM ENGINEERS (BID ID -3354331)

DAVINDER SINGH (BID ID -3361809)

SINGH CONST CO (BID ID -3362355)

K S BUILDERS (BID ID -3353542)

MandeepConstructionCo (BID ID -3362163)