Loading
Loading…
Loading…
Tender Value
₹22.0 Cr
EMD Value
₹12.5 L
Closing Date
31 Dec 2025, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Deposit Work
Above/Below/Par
WORKS
13 conditions · 2 needing a document upload
Financial Criteria: - As per GCC 10(b):- The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; Where: V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
Technical Eligibility Criteria: - As mentioned in GCC 2022 clause 10(a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. The work is executed for similar nature of work as under: Electrification / Rewiring of Service building or residential building / Yard / HT / LT substation work / HT / LT cable work / Street lighting / platform or building lighting management / circulating area lighting / Electrical overhead power supply work / Electrical pump work etc. The work must have been carried out in any of the following organizations: a) Central Government departments or State Government departments. b) Central government PSUs or State Government PSUs.
13 conditions · 12 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Electrical contractor license, Electrical supervisor license.
TENDER FORM (First Sheet) (Ref: Page Nos.9 & 10 of GCC April 2022).
Work(s) completion certificate(s) as per the requirement of Technical eligibility criteria (Ref: Clause 10.1 & and for tenderer participating as JV firm Clause 17.15.1 of TENDER FORM (Second Sheet) at Page Nos.12-14 & 24 of April 2022).
Documents as per the requirement of financial eligibility criteria (Ref: Clause 10.2 and for tenderer participating as JV firm Clause 17.15.2 of TENDER FORM (Second Sheet) along with AnnexureVIB at Page Nos.12-14 & 24 of GCC April 2022).
Documents for evaluating the Bid Capacity, for tenders having advertised value more than Rs.20.00 crore. (Ref: Clause 10.3 and for tenderer participating as JV firm Clause 17.15.3 of TENDER FORM (Second Sheet) along with Annexure-VI, at Page Nos.14, 25 & 35-36 of GCC April 2022)
Certificate stating that the tenderer/s are not liable to be disqualified and all their statements / documents submitted along with bid are true and factual as per Annexure-V (Ref: PARA 6.1 of Part-I, Instruction to Tenderers (ITT) at Page Nos.7 & 33- 34 of GCC April 2022).
In case the tenderer is other than Joint Venture (JV) firm, tenderer has to submit all the documents as mentioned below (Ref: Clause 14 (ii) (a) to (c), (e) to (g), (iv) & 18.10 of TENDER FORM (Second Sheet) at Page Nos.17-18 of GCC April 2022):
Compliance of Employment / Partnership etc. of Retired Railway Employees as per Clause 16 of TENDER FORM (Second Sheet) at Page Nos.19-20 of GCC April 2022, failing which contract is liable to be dealt in accordance with provision of Clause 62 of Standard General Condition of Contract at Page Nos.92-95 of GCC April 2022 (Note: Information / Certification should be given as per 'Appendix-IV').
Copy of Goods and Services Tax (GST) Registration Certificate containing GST Registration Number.
Annexure V(A) for blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender.
In case the tenderer is a Joint Venture (JV) firm, tenderer has to submit all the documents as mentioned below: (i)Copy of Memorandum of Understanding (MoU) duly executed by the JV members on a stamp paper, shall be submitted by the JV along with the tender. The complete details of the members of the JV, their share and responsibility in the JV etc. particularly with reference to financial, technical and other obligations shall be furnished in the MoU. (Ref: Clause 17.6 of TENDER FORM (Second Sheet) at Page Nos. 21 of GCC April 2022 & AppendixVIII of the Tender Document). (ii)Documents of JV Members: (Ref: Clause 17.14 of TENDER FORM (Second Sheet) at Page Nos.22- 24 of GCC April 2022): In case one or more of the members of the JV is/are
In case of tenderer is participating as Sole Proprietor in a tender, the tenderer should submit and undertaking on suitable stamp paper to this effect clearly mentioning PAN Number also along with tender document at the time of submitting of tender.
Electrification & Power supply arrangement of various service buildings & Platforms; Removal of cable infringements & relaying of cables, Provision of pumps, Air Conditioning, Provision of lighting arrangement and other associated Electrical works in connection with 5th - 6th Line Kurla CSMT in Mumbai Division of Central Railway.
LCF-DR-GS-484-2025-3R~CR
LCF-DR-GS-484-2025-3R
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹12.5 L
31 Dec 2025
9 Dec 2025
17 Dec 2025
988 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | 17000.00 | — | — | ||
| Preparation of detailed designs and drawings for the complete electrification of buildings, including load calculation, single-line diagrams, wiring layouts, distribution board schedules, earthing layouts, lighting and fan arrangements, cable routing conduit / concealed / casing - caping, panel drawings, and all related electrical schematics. The design shall specify the type, capacity, and make of equipment; lux levels for each area as per IS:3646 (Part-1) and relevant NBC guidelines; selection of lighting fixtures; type and rating of switches, sockets, MCBs, and distribution boards; cable sizes; and earthing details. All designs and drawings shall be prepared in compliance with the latest relevant IS/IEC standards, statutory requirements, and site conditions, and shall be submitted in both hard copy and editable soft copy formats for approval. | — | — | — | 17,00,000 | |
| — | 15.00 | — | — | ||
| Preparation of designs & drawing for underground cable and cable layout plan | — | — | — | 90,090 | |
| — | 9000.00 | — | — | ||
| Supply of material for concelaed wiring of lights, ceiling fan, exhaust fan, bell & buzzer with 1.5 sq mm & 4 sq. mm, PVC insulated Copper conductor wires along with 14 SWG tinned copper earth wire in 25/32 mm dia PVC conduit pipes, 5 Amps flush type piano switch on GI control board, angular holder/ceiling rose including submain. | — | — | — | 89,37,000 | |
| — | 9000.00 | — | — | ||
| Erection of material, fixing & concealed wiring for lights, ceiling fan, exhaust fan, bell & buzzer with 1.5 sq mm & 4 sq. mm, PVC insulated Copper conductor wires along with 14 SWG tinned copper earth wire in 25/32 mm dia PVC conduit pipes, 5 Amps flush type piano switch on GI control board, angular holder/ceiling rose including submain. | — | — | — | 13,32,000 | |
| — | 200.00 | — | — | ||
| Supply of material of stair case wiring for bulk head & outdoor lights with single core multi-stranded PVC insulated 1.1KV grade copper conductor of size not less than 2.5 sq mm along with running earthing of one wire of 2.5 sq mm copper conductor of green colour in rigid PVC conduit pipe of 19 mm size 1.2 mm thick (heavy duty) & ceiling rose. The PVC conduit pipe shall be fire retardant conforming to relevant ISS. 16Amps two way switch duly fixed on sun mica finished TW board to enable to ON/ OFF power from ground & top floor. | — | — | — | 50,600 | |
| — | 200.00 | — | — | ||
| Erection of material, fixing, concealed wiring of stair case wiring for bulk head & outdoor lights with single core multi-stranded PVC insulated 1.1KV grade copper conductor of size not less than 2.5 sq mm along with running earthing of one wire of 2.5 sq mm copper conductor of green colour in rigid PVC conduit pipe of 19 mm size 1.2 mm thick (heavy duty) & ceiling rose. The PVC conduit pipe shall be fire retardant conforming to relevant ISS. 16Amps two way switch duly fixed on sun mica finished TW board to enable to ON/ OFF power from ground & top floor. | — | — | — | 4,800 | |
| — | 500.00 | — | — | ||
| Supply of Point wiring for light/bell hybrid type (surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm HMS PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-HW | — | — | — | 3,31,000 | |
| — | 500.00 | — | — | ||
| Erection of Point wiring for light/bell hybrid type (surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm HMS PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-HW | — | — | — | 37,000 | |
| — | 5000.00 | — | — | ||
| Supplying HMS PVC conduit 25mm dia with necessary accessories in RCC work/false ceiling/false flooring/wall/floor as per specification no. WG-MA/CC. | — | — | — | 6,00,000 | |
| — | 5000.00 | — | — | ||
| Laying HMS PVC conduit 25mm dia with necessary accessories in RCC work/false ceiling/false flooring/wall/floor as per specification no. WG-MA/CC. | — | — | — | 60,000 | |
| — | 250.00 | — | — | ||
| Supply of material of flush type 5 pins 5 Amps socket outlet, piano switch on control board on Sr. No.1 & connection with 1.5 sq mm PVC insulated, Copper conductor wires. | — | — | — | 45,500 | |
| — | 250.00 | — | — | ||
| Erection of material & fixing of flush type 5 pins 5 Amps socket outlet, piano switch on control board on Sr. No.1 & connection with 1.5 sq mm PVC insulated, Copper conductor wires. | — | — | — | 2,500 | |
| — | 100.00 | — | — | ||
| Supply of material for 3 x 6 A, 5 pins socket outlets complete with 4.0 Sq mm PVC insulated Copper conductor wires along with 14 SWG tinned copper earth wire in 32mm dia PVC conduit pipes, flush type, 6 A socket outlets, 6 A piano switches on Control Board | — | — | — | 1,94,200 | |
| — | 100.00 | — | — | ||
| Erection of material, fixing & concealed wiring for 3 x 6 A, 5 pins socket outlets complete with 4.0 Sq mm PVC insulated Copper conductor wires along with 14 SWG tinned copper earth wire in 32mm dia PVC conduit pipes, flush type, 6 A socket outlets, 6 A piano switches on Control Board | — | — | — | 1,800 | |
| — | 1000.00 | — | — | ||
| Supply of material for 2 x 5 A, 5 pins socket outlets complete with 2.5 Sq mm PVC insulated Copper conductor wires along with 14 SWG tinned copper earth wire in 25/32mm dia PVC conduit pipes, flush type, 5 A socket outlets, 5A piano switches in GI box with PVC top sheet 5 mm thick. | — | — | — | 7,34,000 | |
| — | 1000.00 | — | — | ||
| Erection of material, fixing & concealed wiring for 2 x 5 A, 5 pins socket outlets complete with 2.5 Sq mm PVC insulated Copper conductor wires along with 14 SWG tinned copper earth wire in 25/32mm dia PVC conduit pipes, flush type, 5 A socket outlets, 5A piano switches in GI box with PVC top sheet 5 mm thick. | — | — | — | 1,64,000 | |
| — | 600.00 | — | — | ||
| Supply of material for 5/15 A universal socket outlet complete with 4.0 Sq mm PVC insulated Copper conductor wires along with 14SWG tinned copper earth wire in 25/32mm dia PVC conduit pipes, flush type, 5/15A socket outlet, 15A piano switch in GI box with PVC top sheet 5 mm thick. | — | — | — | 3,58,200 | |
| — | 600.00 | — | — | ||
| Erection of material, fixing & concealed wiring for 5/15 A universal socket outlet complete with 4.0 Sq mm PVC insulated Copper conductor wires along with 14SWG tinned copper earth wire in 25/32mm dia PVC conduit pipes, flush type, 5/15A socket outlet, 15A piano switch in GI box with PVC top sheet 5 mm thick. | — | — | — | 18,600 | |
| — | 500.00 | — | — | ||
| Supplying unbreakable concealed type modular switch box with double mounting plate for 3 / 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. | — | — | — | 53,000 | |
| — | 500.00 | — | — | ||
| Erecting unbreakable concealed type modular switch box with double mounting plate for 3 / 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. | — | — | — | 38,500 | |
| — | 800.00 | — | — | ||
| Supplying unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. | — | — | — | 1,20,000 | |
| — | 800.00 | — | — | ||
| Erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. | — | — | — | 71,200 | |
| — | 220.00 | — | — | ||
| Supplying unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. | — | — | — | 60,720 | |
| — | 220.00 | — | — | ||
| Erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. | — | — | — | 22,660 | |
| — | 40.00 | — | — | ||
| Supplying unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. | — | — | — | 22,440 | |
| — | 40.00 | — | — | ||
| Erecting unbreakable concealed type modular switch box with double mounting plate for 16 / 18 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. | — | — | — | 2,480 | |
| — | 50.00 | — | — | ||
| Supply of 10W LED bulk head fitting water proof with 10 Watt LED lamp with fixing arrangement. | — | — | — | 93,600 | |
| — | 50.00 | — | — | ||
| Erection, testing & commissioing of 10W LED bulk head fitting water proof with 10 Watt LED lamp with fixing arrangement. | — | — | — | 4,700 | |
| — | 2800.00 | — | — | ||
| Supply of 18 W integral sleek extruded aluminum LED channel with white acrylic cover to be fixed on wall on 2 Nos. PVC round box or on 2 No. GI "V" brackets with necessary hardware as per site requirement with connection form ceiling rose through 1.0 sqmm 3 Core copper cable. | — | — | — | 24,16,400 | |
| — | 2800.00 | — | — | ||
| Erection testing & commissioning of 18 W integral sleek extruded aluminum LED channel with white acrylic cover to be fixed on wall on 2 Nos. PVC round box or on 2 No. GI "V" brackets with necessary hardware as per site requirement with connection form ceiling rose through 1.0 sqmm 3 Core copper cable. | — | — | — | 2,10,000 | |
| — | 500.00 | — | — | ||
| Supplying LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. | — | — | — | 5,27,000 | |
| — | 500.00 | — | — | ||
| Erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. | — | — | — | 38,500 | |
| — | 150.00 | — | — | ||
| Supply of 36 W White powder coated CRCA housing with LEDs, seamless front frame & flat white high transmission acrylic cover Recess mounting LED 2X2 luminaries to be fixed in false ceiling with necessary hardware and connection from ceiling rose through 1.0 Sq.mm.,3 core, Copper Cord | — | — | — | 4,31,100 | |
| — | 150.00 | — | — | ||
| Erection of 36 W White powder coated CRCA housing with LEDs, seamless front frame & flat white high transmission acrylic cover Recess mounting LED 2X2 luminaries to be fixed in false ceiling with necessary hardware and connection from ceiling rose through 1.0 Sq.mm.,3 core, Copper Cord | — | — | — | 21,600 | |
| — | 200.00 | — | — | ||
| Supply of Reading light LED in grey powder coated elegant design extruded Aluminum housing with swivel type arrangement for wall mounting with connection from ceiling rose through 1.0 Sq.mm., 3 core, Copper Cord | — | — | — | 2,09,200 | |
| — | 200.00 | — | — | ||
| Erection, testing & commissioning of Reading light LED in grey powder coated elegant design extruded Aluminum housing with swivel type arrangement for wall mounting with connection from ceiling rose through 1.0 Sq.mm., 3 core, Copper Cord | — | — | — | 10,400 | |
| — | 100.00 | — | — | ||
| Supply of 5 W LED and other accessories complete with connection to ceiling rose for bathroom. | — | — | — | 75,600 | |
| — | 100.00 | — | — | ||
| Erection and testing of 5 W LED and other accessories complete with connection to ceiling rose for bathroom. | — | — | — | 2,400 | |
| — | 100.00 | — | — | ||
| Supply of Mirror light 5 W LED in grey powder coated elegant design extruded Aluminum housing with swivel type arrangement for wall mounting with connection from ceiling rose through 1.0 Sq.mm.,3 core, Copper Cord | — | — | — | 81,600 | |
| — | 100.00 | — | — | ||
| Erection, testing & commissioning of Mirror light 5 W LED in grey powder coated elegant design extruded Aluminum housing with swivel type arrangement for wall mounting with connection from ceiling rose through 1.0 Sq.mm.,3 core, Copper Cord | — | — | — | 4,000 | |
| — | 100.00 | — | — | ||
| Supply of wall mounted decorative LED Night Lamp Fitting | — | — | — | 66,200 | |
| — | 100.00 | — | — | ||
| Erection, testing & commissioning of wall mounted decorative LED Night Lamp Fitting | — | — | — | 3,400 | |
| — | 200.00 | — | — | ||
| Supply of LED Foot light with connection from fitiing through 1.0 Sq.mm. 3 core, Copper cord with necessary fixing arrangement in PVC pipe with necessary fixing arangement in PVC pipe. | — | — | — | 79,800 | |
| — | 200.00 | — | — | ||
| Erection, testing & commissioning of LED Foot light with connection from fitiing through 1.0 Sq.mm. 3 core, Copper cord with necessary fixing arrangement in PVC pipe with necessary fixing arangement in PVC pipe. | — | — | — | 4,000 | |
| — | 850.00 | — | — | ||
| Supplying energy saving Ceiling Fan with BLDC Motor 1200 mm, 5 Star. | — | — | — | 21,54,750 | |
| — | 850.00 | — | — | ||
| Erecting & Commissioining energy saving Ceiling Fan with BLDC Motor 1200 mm, 5 Star. | — | — | — | 1,31,750 | |
| — | 850.00 | — | — | ||
| Supplying ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. | — | — | — | 2,38,000 | |
| — | 850.00 | — | — | ||
| Erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. | — | — | — | 13,600 | |
| — | 32.00 | — | — | ||
| Supply of super energy efficient BLDC motor industrial exhaust fan of size 300mm (12") sweep and standard accessories, as per specifications. (Minimum Warrantee - 2 years) | — | — | — | 1,28,256 | |
| — | 32.00 | — | — | ||
| Instllation, fixing, testing & commissioning of super energy efficient BLDC motor industrial exhaust fan of size 300mm (12") sweep and standard accessories, as per specifications. (Minimum Warrantee - 2 years) | — | — | — | 14,464 | |
| — | 60.00 | — | — | ||
| Supplying exhaust fan medium duty 230 V A.C. 50 cycles, 150 - 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and 'E' class insulation. | — | — | — | 1,20,420 | |
| — | 60.00 | — | — | ||
| Erecting exhaust fan medium duty 230 V A.C. 50 cycles, 150 - 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and 'E' class insulation. | — | — | — | 4,260 | |
| — | 10.00 | — | — | ||
| Supply of 63 amps Four pole MCB in Sheet Enclose. | — | — | — | 31,400 | |
| — | 10.00 | — | — | ||
| Erection, testing & commissioning of 63 amps Four pole MCB in Sheet Enclose. | — | — | — | 1,500 | |
| — | 420.00 | — | — | ||
| Supply of SP MCB 10 A to 32 A in existing single phase concealed distribution board. | — | — | — | 1,07,520 | |
| — | 420.00 | — | — | ||
| Erection, testing & commissioning of SP MCB 10 A to 32 A in existing single phase concealed distribution board. | — | — | — | 5,460 | |
| — | 35.00 | — | — | ||
| Supply of 32/40 amps DP MCB in Sheet enclosure for meter connection. | — | — | — | 44,380 | |
| — | 35.00 | — | — | ||
| Installation, Testing & Commissioning of 32/40 amps DP MCB in Sheet enclosure for meter connection. | — | — | — | 2,100 | |
| — | 28.00 | — | — | ||
| Providing of 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB | — | — | — | 47,964 | |
| — | 28.00 | — | — | ||
| Erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SWRCCB/RCCB | — | — | — | 952 | |
| — | 12.00 | — | — | ||
| Supply of 3 phase DB incoming 100 A MCCB 1 No, outgoing 10 A SP MCB 5 Nos , 20/25 A SP MCB 5 Nos , 40 A SP MCB 8 Nos | — | — | — | 1,67,772 | |
| — | 12.00 | — | — | ||
| Erection, testing and commissioning of 3 phase DB incoming 100 A MCCB 1 No, outgoing 10 A SP MCB 5 Nos , 20/25 A SP MCB 5 Nos , 40 A SP MCB 8 Nos | — | — | — | 8,388 | |
| — | 55.00 | — | — | ||
| "Supply of double door wall mounted SDB on GI angle frame with internal wiring, copper bus bar for phases, neutral & earthing consisting of following:- -1 x 63 A 4 pole RCCB, 30 / 100 mA for incoming -6 x 10 A, 6 x 20 A, 3 x 40 A & 3 x 32 A SP MCBs for outgoing. Each MCB shall be 10 KA capacities. " | — | — | — | 5,32,840 | |
| — | 55.00 | — | — | ||
| "Erection, testing & commissioning of double door wall mounted SDB on GI angle frame with internal wiring, copper bus bar for phases, neutral & earthing consisting of following:- -1 x 63 A 4 pole RCCB, 30 / 100 mA for incoming -6 x 10 A, 6 x 20 A, 3 x 40 A & 3 x 32 A SP MCBs for outgoing. Each MCB shall be 10 KA capacities. " | — | — | — | 26,620 | |
| — | 48.00 | — | — | ||
| Skilled Worker for working in Depot / Office / Site as per rly requirement. [4 Nos x 12 Months = 48 Months] | — | — | — | 14,12,640 | |
| — | 200.00 | — | — | ||
| "Supply of Double door wall mounted SDB on MS Angle frame with internal wiring, copper bus bar for phase, neutral & earthing consisting of: -1 x 40 Amps DP MCB for I/C -2 x 20 Amps & 4 x 6 A SP MCBs for O/G." | — | — | — | 3,97,800 | |
| — | 200.00 | — | — | ||
| "Erection, Testing & Commissioning of Double door wall mounted SDB on MS Angle frame with internal wiring, copper bus bar for phase, neutral & earthing consisting of: -1 x 40 Amps DP MCB for I/C -2 x 20 Amps & 4 x 6 A SP MCBs for O/G." | — | — | — | 21,800 | |
| — | 10.00 | — | — | ||
| Supply of 315/400 amps TPN MCCB in Sheet encloser with HRC fuses | — | — | — | 1,93,260 | |
| — | 10.00 | — | — | ||
| Erection, Testing & Commissioning of 315/400 amps TPN MCCB in Sheet encloser with HRC fuses | — | — | — | 48,310 | |
| — | 6.00 | — | — | ||
| Supply of 250 amps TPN MCCB in Sheet encloser with HRC fuses | — | — | — | 51,498 | |
| — | 6.00 | — | — | ||
| Erection, Testing & Commissioning of 250 amps TPN MCCB in Sheet encloser with HRC fuses | — | — | — | 12,876 | |
| — | 15.00 | — | — | ||
| "Supply of 4 way Pillar distribution Board as per specification enclosed. i/c - 4 pole, 400 A, MCCB o/g - 4 No, 250 A, HRC Fuse" | — | — | — | 18,66,885 | |
| — | 15.00 | — | — | ||
| "Erection, testing and commissioning of 4 way Pillar distribution Board as per specification enclosed. i/c - 4 pole, 400 A, MCCB o/g - 4 No, 250 A, HRC Fuse" | — | — | — | 19,410 | |
| — | 18.00 | — | — | ||
| Supply of Mini Feeder pillars per MSEDCL specification. 1 x 400 / 250 A I/C HRC fuses | — | — | — | 4,23,234 | |
| — | 18.00 | — | — | ||
| Erection, testing commissioning of Mini Feeder pillars per MSEDCL specification. 1 x 400 / 250 A I/C HRC fuses | — | — | — | 22,284 | |
| — | 4.00 | — | — | ||
| Supply of 100A 4P MCCB 36 KA with SS enclosure duly erected on wall. | — | — | — | 87,444 | |
| — | 4.00 | — | — | ||
| Installation, testing & commissioning of 100A 4P MCCB 36 KA with SS enclosure duly erected on wall. | — | — | — | 9,716 | |
| — | 8.00 | — | — | ||
| Supply of LT distribution panel, 2 x 400 amps 4 pole MCCB as incomer. 400 amps automatic changeover switch with all necessary protection. 2 x 200 A 4P MCCB, 2 x 125 apms 4P MCCB, 3 x 100A 4P MCCB as outgoing with copper busbar and wiring arrangement as per site requiremnt. | — | — | — | 27,17,376 | |
| — | 8.00 | — | — | ||
| Erection, testing & commissioning of LT distribution panel, 2 x 400 amps 4 pole MCCB as incomer. 400 amps automatic changeover switch with all necessary protection. 2 x 200 A 4P MCCB, 2 x 125 apms 4P MCCB, 3 x 100A 4P MCCB as outgoing with copper busbar and wiring arrangement as per site requiremnt. | — | — | — | 6,79,344 | |
| — | 10.00 | — | — | ||
| Design, fabrication, Supply of LT Distribution/Panel board having thermal magnetic MCCB's 250A 4P 36kA breaking capacity- 2 no. as incomer and automatic change over switch 250 A 36 kA breaking capacity-1No with inbuilt time delay primary protection against single phasing & over voltage, and 200 A 4P MCCB 36 kA breaking capacity - 1 nos., 125 A 4P MCCB 16kA breaking capacity-2 Nos., 100 A 4P MCCB 16 kA breaking capacity-3 Nos. as outgoing with 250A Copper busbar, Rotary Handle vary Depth, Padlock support for operating Handle, Phase barrier, DPX spreader Links, etc. as required and complete in all respect. | — | — | — | 34,99,840 | |
| — | 10.00 | — | — | ||
| Multiple loading / unloading, storing, installation, fixing, testing Nos. & commissioning LT Distribution/Panel board having thermal magnetic MCCB's 250A 4P 36kA breaking capacity- 2 no. as incomer and automatic change over switch 250 A 36 kA breaking capacity-1No with inbuilt time delay primary protection against single phasing & over voltage, and 200 A 4P MCCB 36 kA breaking capacity - 1 nos., 125 A 4P MCCB 16kA breaking capacity-2 Nos., 100 A 4P MCCB 16 kA breaking capacity-3 Nos. as outgoing with 250A Copper busbar, Rotary Handle vary Depth, Padlock support for operating Handle, Phase barrier, DPX spreader Links, etc. as required and complete in all respect. | — | — | — | 8,74,960 | |
| — | 7.00 | — | — | ||
| "Design, fabrication, supply of floor mounted double door outdoor type MDB with GI angle stand 65mmx65mmx6mm made up of 14SWG hot dip GI sheet enclosure, vermin proof, front opening door with locking arrangement with indication lamps, Voltmeter, Ammeter with selector switches, copper bus bar 300A with measurement of 3ph. power supply consisting of: 1x200A TPN MCCB for I/C, 4x63A TPN MCCB & 4x32A TPN MCB for O/G including foundation. MCCBs shall be of 50KA breaking capacity and MCB (10KA)." | — | — | — | 2,36,740 | |
| — | 7.00 | — | — | ||
| "Erection, testing & commissioning of floor mounted double door outdoor type MDB with GI angle stand 65mmx65mmx6mm made up of 14SWG hot dip GI sheet enclosure, vermin proof, front opening door with locking arrangement with indication lamps, Voltmeter, Ammeter with selector switches, copper bus bar 300A with measurement of 3ph. power supply consisting of: 1x200A TPN MCCB for I/C, 4x63A TPN MCCB & 4x32A TPN MCB for O/G including foundation. MCCBs shall be of 50KA breaking capacity and MCB (10KA)." | — | — | — | 11,837 | |
| — | 4.00 | — | — | ||
| Design, supply of Auto change over panel along with ATS & Two numbers 100 A I/C TPN MCCB in sheet steel enclosure, cable terminations and wiring including indication lamps and interlocking. This include 3 Nos SDB of 1 ph & 4 way type in sheet steel enclosure consist of 1x63A DP MCB for incoming & 12x 20A SP MCB for outgoing. 24 hrs. timers for auto switch ON/OFF lighting in 30/70% circuits are to be included in the SDB panel. | — | — | — | 4,85,368 | |
| — | 4.00 | — | — | ||
| Erection, testing & commissioning of Auto change over panel along with ATS & Two numbers 100 A I/C TPN MCCB in sheet steel enclosure, cable terminations and wiring including indication lamps and interlocking. This include 3 Nos SDB of 1 ph & 4 way type in sheet steel enclosure consist of 1x63A DP MCB for incoming & 12x 20A SP MCB for outgoing. 24 hrs. timers for auto switch ON/OFF lighting in 30/70% circuits are to be included in the SDB panel. | — | — | — | 24,268 | |
| — | 3.00 | — | — | ||
| Supplying ON LOAD automatic transfer switch 4 pole, 415V, 200A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 as per specification no. SW-SWR/ATS. | — | — | — | 1,73,451 | |
| — | 3.00 | — | — | ||
| Erecting ON LOAD automatic transfer switch 4 pole, 415V, 200A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging, connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 as per specification no. SW-SWR/ATS. | — | — | — | 19,272 | |
| — | 1.00 | — | — | ||
| Supply of LT distribution board manufactured from CRCA1.2mm sheet cubical type with 1.5 Mtr.floor mounted stand consisting 3 Nos. 800A (2 I/C+ I B/C) ACB for LT incoming from transformer supply and 2 Nos. 500A MCCB and 6 Nos. 250A MCCB along with PF meter, voltmeter, ampmeter, 2No. KWH meters. V-meter, A-meter etc. and cable terminal for out going cable with cable gland lugs, nut bolt etc. | — | — | — | 4,60,618 | |
| — | 1.00 | — | — | ||
| Erection, testing & commissioning of LT distribution board manufactured from CRCA 1.2 mm sheet cubical type with 1.5 Mtr. floor mounted stand consisting 3 Nos. 800A(2 I/C+ I B/C) ACB for LT incoming from transformer supply and 2 Nos. 500A MCCB and 6 Nos. 250A MCCB along with PF meter, voltmeter, ampmeter, 2 No. KWH meters. V-meter, A-meter etc. and cable terminal for out going cable with cable gland lugs, nut bolt etc. | — | — | — | 24,243 | |
| — | 30.00 | — | — | ||
| Supply of Red & Green indicator LED lights in off white sheet steel enclosure to be fixed on wall near cabin door with necessary fixing hardware and connecting from ceiling rose with connector and 1.0 Sq.mm., 3 core, PVC insulated, flexible Copper cord of suitable length | — | — | — | 13,200 | |
| — | 30.00 | — | — | ||
| Erection of Red & Green indicator LED lights in off white sheet steel enclosure to be fixed on wall near cabin door with necessary fixing hardware and connecting from ceiling rose with connector and 1.0 Sq.mm., 3 core, PVC insulated, flexible Copper cord of suitable length | — | — | — | 660 | |
| — | 60.00 | — | — | ||
| Supply of ding dong call bell to be fixed on wall with with connection from ceiling rose through 1.0 sq.mm. 3 core, copper cord | — | — | — | 5,820 | |
| — | 60.00 | — | — | ||
| Erection of ding dong call bell to be fixed on wall with with connection from ceiling rose through 1.0 sq.mm. 3 core, copper cord | — | — | — | 300 | |
| — | 100.00 | — | — | ||
| Supply of material of 20 Amps Plug Socket & 20 A MCB ON Control Board for AC etc and wiring with 4.0 sq.mm PVC insulated copper conductor wires along with 14SWG tinned bare copper earth wire in concealed 25/32mm dia PVC conduit pipes | — | — | — | 1,18,800 | |
| — | 100.00 | — | — | ||
| Erection of material & fixing of 20 Amps Plug Socket & 20 A MCB ON Control Board for AC etc and wiring with 4.0 sq.mm PVC insulated copper conductor wires along with 14SWG tinned bare copper earth wire in concealed 25/32mm dia PVC conduit pipes | — | — | — | 9,800 | |
| — | 50.00 | — | — | ||
| Erection, transportation, testing & commissioning of 1.5 / 2 Ton split type air conditioner fitted with rotary compressor R-22 refrigerant with nominal cooling capacity (k.cal/hr) 5800 - 6000 and minimum guaranteed cooling capacity (kcal/hr) 5500, minimum room discharge air flow (cub. mtr/hr) 800, EER (w/w) 2.9 - 3.1, 5 star rating , condenser and cooling coil should be of copper tube only. | — | — | — | 1,00,000 | |
| — | 150.00 | — | — | ||
| Supply of 5/8" Copper pipes with nitrite rubber insulation | — | — | — | 40,350 | |
| — | 150.00 | — | — | ||
| Erection, testing & commissioning of 5/8" Copper pipes with nitrite rubber insulation | — | — | — | 2,100 | |
| — | 150.00 | — | — | ||
| Supply of 3/8" Copper pipes with nitrite rubber insulation | — | — | — | 33,150 | |
| — | 150.00 | — | — | ||
| Erection, testing & commissioning of 3/8" Copper pipes with nitrite rubber insulation | — | — | — | 1,800 | |
| — | 50.00 | — | — | ||
| Design, fabrication, painting, supply of M.S. angle stand of suitable size for outdoor unit of 1.5 / 2 TR split air-conditioner | — | — | — | 64,300 | |
| — | 50.00 | — | — | ||
| Erection of M.S. angle stand of suitable size for outdoor unit of 1.5 / 2 TR split air- conditioner | — | — | — | 25,100 | |
| — | 150.00 | — | — | ||
| Supply of water quality type heavy duty 3/4" PVC pipe for drainage of water from AC units. | — | — | — | 17,700 | |
| — | 150.00 | — | — | ||
| Erection of water quality type heavy duty 3/4" PVC pipe for drainage of water from AC units. | — | — | — | 750 | |
| — | 6.00 | — | — | ||
| Supplying of 25 m (clear height) motorized high-mast (Top-150mm, Bottom- 540 mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S355/E350 & 3+4+4 mm thickness, with base plate 25 mm thick x OD 730 mm grade as per IS-2062, pole made in signal section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel - 316 grade 2 nos., 7x19 construction 6 mm, SG-DG U clamps, double drum winch assembly 600 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 16 nos. luminaries and its control gear box, lightning arrestor, arrangement for fixing aviation light, night glow reflector on pole at suitable height, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specificationson provided foundation J type stud/bolts with double check nuts & necessary accessories complete. specification no. OHPL/HM. (High Mast rates are including High Mast and its accessories, foundation bolts and aviation obstruction lights). | — | — | — | 18,47,190 | |
| — | 6.00 | — | — | ||
| Erecting, testing & commissioning of 25 m (clear height) motorized high-mast (Top- 150mm, Bottom- 540 mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S355/E350 & 3+4+4 mm thickness, with base plate 25 mm thick x OD 730 mm grade as per IS-2062, pole made in signal section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel - 316 grade 2 nos., 7x19 construction 6 mm, SG-DG U clamps, double drum winch assembly 600 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 16 nos. luminaries and its control gear box, lightning arrestor, arrangement for fixing aviation light, night glow reflector on pole at suitable height, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specificationson provided foundation J type stud/bolts with double check nuts & necessary accessories complete. specification no. OHPL/HM. (High Mast rates are including High Mast and its accessories, foundation bolts and aviation obstruction lights). | — | — | — | 2,05,242 | |
| — | 96.00 | — | — | ||
| Supply of 200w flood light LED luminaries, driver, control gear boxes & other accessories | — | — | — | 7,86,048 | |
| — | 96.00 | — | — | ||
| Erection, testing & commissioning of 200w flood light LED luminaries, driver, control gear boxes & other accessories | — | — | — | 20,832 | |
| — | 48.00 | — | — | ||
| Casting of RCC foundation for 25M long high mast with RCC with contractor's men & materials. Cement shall be of ACC or L&T. Necessary test certificates shall be produced at the time of supply. | — | — | — | 3,01,680 | |
| — | 48.00 | — | — | ||
| Excavation in all type of soil for casting foundation of above high mast | — | — | — | 4,512 | |
| — | 16.00 | — | — | ||
| "Design, supply of outdoor type floor mounted control panel for liqhtinq hiqh mast having front opening doors made out of 14 SWG HDGI sheets & GI angle stand of suitable size of angle size 50mm x 50mm x 5mm. The control panel shall consists of: - 1x 63 A TPN SFU with HRC fuses - 3 Nos. Neon indicating lamps - 32 A ML-2 contactor with programmable double dial timer & proximity switch for automatic control of lights at preset timings - 32 A TPN SFU with HRC fuses for power tool machine - 1 No. 3 phase SDB in sheet steel enclosure consists of - 1 x 32 A TPN MC8 for incoming - 12 x 6A SP MCB with Neutral link for outgoing - Suitable starter, single phase preventor & reverse forward switch for control. " | — | — | — | 1,62,288 | |
| — | 16.00 | — | — | ||
| "Installation, testing & commissioning of outdoor type floor mounted control panel for liqhtinq hiqh mast having front opening doors made out of 14 SWG HDGI sheets & GI angle stand of suitable size of angle size 50mm x 50mm x 5mm. The control panel shall consists of: - 1x 63 A TPN SFU with HRC fuses - 3 Nos. Neon indicating lamps - 32 A ML-2 contactor with programmable double dial timer & proximity switch for automatic control of lights at preset timings - 32 A TPN SFU with HRC fuses for power tool machine - 1 No. 3 phase SDB in sheet steel enclosure consists of - 1 x 32 A TPN MC8 for incoming - 12 x 6A SP MCB with Neutral link for outgoing - Suitable starter, single phase preventor & reverse forward switch for control. " | — | — | — | 17,360 | |
| — | 80.00 | — | — | ||
| Supply of LED street light fitting of 72 watt dia cast Alu. Body outdoor high power LED & unique peanut lens with choice of optic to ensure uniform distribution & higher spacing between poles & maintenance free system | — | — | — | 2,17,760 | |
| — | 80.00 | — | — | ||
| Erection, testing and commissioning of LED street light fitting of 72 watt dia cast Alu. Body outdoor high power LED & unique peanut lens with choice of optic to ensure uniform distribution & higher spacing between poles & maintenance free system | — | — | — | 21,760 | |
| — | 150.00 | — | — | ||
| Supply of Octagonal hot dip galvanized mid hinged pole in two section having 70 mm top dia and 130 mm bottom dia and 3 mm thick with base plate of 210x210x12 mm thick, suitable ribs, nylon rope, guide pulley earthing clips, service connection bracket, cover for terminal box, pocket and double brackets for luminaries. The clear height of the pole shall be 4.5 meter and foundation bolt of size 4 no.x20 mm x 600 mm. Each pole should be provided 6A SP MCB for individual controls. The cost shall include excavation of earth and casting of M-20 CC foundation of size 0.6x0.6xl.25 meter as per IS 456 or latest version using 20 to 25 mm stone metal, sand, bonding with 8-12 mm thick MS rod etc | — | — | — | 48,38,550 | |
| — | 150.00 | — | — | ||
| Erection, testing & commisioning of Octagonal hot dip galvanized mid hinged pole in two section having 70 mm top dia and 130 mm bottom dia and 3 mm thick with base plate of 210x210x12 mm thick, suitable ribs, nylon rope, guide pulley earthing clips, service connection bracket, cover for terminal box, pocket and double brackets for luminaries. The clear height of the pole shall be 4.5 meter and foundation bolt of size 4 no.x20 mm x 600 mm. Each pole should be provided 6A SP MCB for individual controls. The cost shall include excavation of earth and casting of M-20 CC foundation of size 0.6x0.6xl.25 meter as per IS 456 or latest version using 20 to 25 mm stone metal, sand, bonding with 8-12 mm thick MS rod etc | — | — | — | 5,37,750 | |
| — | 500.00 | — | — | ||
| Supply of 30 Watts AC LED street light luminiaries with glass IP 65 including all connected accessories etc. as per rly specification. | — | — | — | 9,13,500 | |
| — | 500.00 | — | — | ||
| Fixing, testing and commissioning of 30 Watts AC LED street light luminiaries with glass IP 65 including all connected accessories etc. as per rly specification. | — | — | — | 90,000 | |
| — | 30.00 | — | — | ||
| Supplying 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no.OH- PL/OPL. | — | — | — | 3,83,160 | |
| — | 30.00 | — | — | ||
| Erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no.OH- PL/OPL. | — | — | — | 33,450 | |
| — | 30.00 | — | — | ||
| Supply of material for M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). | — | — | — | 66,510 | |
| — | 30.00 | — | — | ||
| Erection of material & Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). | — | — | — | 25,920 | |
| — | 60.00 | — | — | ||
| Supplying LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2. | — | — | — | 2,85,180 | |
| — | 60.00 | — | — | ||
| Erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2. | — | — | — | 8,400 | |
| — | 10.00 | — | — | ||
| Supplying 16 m (clear height) High Mast (Top-150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 8 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per specification no. OHPL/ HM (excluding luminaries). | — | — | — | 18,40,110 | |
| — | 10.00 | — | — | ||
| Erecting 16 m (clear height) High Mast (Top-150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 8 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation as per specification no. OHPL/ HM (excluding luminaries). | — | — | — | 2,28,440 | |
| — | 10.00 | — | — | ||
| Supply of materials for M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 16 m raising lowering high mast). | — | — | — | 1,35,740 | |
| — | 10.00 | — | — | ||
| Erection of materials for making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 16 m raising lowering high mast). | — | — | — | 1,18,580 | |
| — | 60.00 | — | — | ||
| Supplying LED Flood light fitting of 150W, including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2 | — | — | — | 7,99,020 | |
| — | 60.00 | — | — | ||
| Erecting LED Flood light fitting of 150W, including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2 | — | — | — | 12,120 | |
| — | 30.00 | — | — | ||
| Supply of galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OHPL/ PBKT | — | — | — | 1,42,590 | |
| — | 30.00 | — | — | ||
| Erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OHPL/ PBKT | — | — | — | 4,200 | |
| — | 60.00 | — | — | ||
| Supply of galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT | — | — | — | 3,40,260 | |
| — | 60.00 | — | — | ||
| Erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT | — | — | — | 5,580 | |
| — | 300.00 | — | — | ||
| Supply of FRP junction box with loop in loop out arrangement and provision of Kit Kat type fuses water tight & necessary fixing arrangement on pole/wall/ structure with clamps and hardware. As per rly requirement & specification. | — | — | — | 1,43,100 | |
| — | 300.00 | — | — | ||
| Erection of FRP junction box with loop in loop out arrangement and provision of Kit Kat type fuses water tight & necessary fixing arrangement on pole/wall/ structure with clamps and hardware. As per rly requirement & specification. | — | — | — | 15,900 | |
| — | 8000.00 | — | — | ||
| Supply of 4 Run 10 sqmm coppper flexible wire along with one no 6 sq.mm green wire in 25 mm dia pvc pipe | — | — | — | 49,68,000 | |
| — | 8000.00 | — | — | ||
| Laying of 4 Run 10 sqmm coppper flexible wire along with one no 6 sq.mm green wire in 25 mm dia pvc pipe | — | — | — | 2,24,000 | |
| — | 20000.00 | — | — | ||
| Supply of 2 Run 6 sqmm coppper flexible wire along with one no 4 sq.mm green wire in 25 mm dia pvc pipe | — | — | — | 35,20,000 | |
| — | 20000.00 | — | — | ||
| Laying of 2 Run 6 sqmm coppper flexible wire along with one no 4 sq.mm green wire in 25 mm dia pvc pipe | — | — | — | 1,60,000 | |
| — | 10000.00 | — | — | ||
| Supply of 2 Run 4 sqmm coppper flexible wire along with one no 2.5 sq.mm green wire in 25 mm dia pvc pipe | — | — | — | 14,10,000 | |
| — | 10000.00 | — | — | ||
| Laying of 2 Run 4 sqmm coppper flexible wire along with one no 2.5 sq.mm green wire in 25 mm dia pvc pipe | — | — | — | 60,000 | |
| — | 3000.00 | — | — | ||
| Supply of 3 core 1.5 sq. mm copper conductor cable, 1100V grade, multi-core stranded copper conductor, PVC insulated & sheathed FRLSH unarmoured cable as per IS:1554 (Part1), ISI marked, suitable for power & control wiring. | — | — | — | 1,95,000 | |
| — | 3000.00 | — | — | ||
| Laying, erection, testing & commissioning of 3 core 1.5 sq. mm copper conductor cable, 1100V grade, multi-core stranded copper conductor, PVC insulated & sheathed FRLSH unarmoured cable as per IS:1554 (Part1), ISI marked, suitable for power & control wiring. | — | — | — | 18,000 | |
| — | 200.00 | — | — | ||
| Supplying 1.1 kV grade XLPE insulated galvanized steel wire 3 core 10 sq. mm armoured copper conductor FRLSH sheathed cable | — | — | — | 52,000 | |
| — | 200.00 | — | — | ||
| Laying & erecting 1.1 kV grade XLPE insulated galvanized steel wire 3 core 10 sq. mm armoured copper conductor FRLSH sheathed cable | — | — | — | 3,200 | |
| — | 4000.00 | — | — | ||
| Supply of 3 core 2.5 sq. mm copper conductor cable, 1100V grade, multi-core stranded copper conductor, PVC insulated & sheathed FRLSH unarmoured cable as per IS:1554 (Part1), ISI marked, suitable for power & control wiring. | — | — | — | 3,12,000 | |
| — | 4000.00 | — | — | ||
| Laying, erection, testing & commissioning of 3 core 2.5 sq. mm copper conductor cable, 1100V grade, multi-core stranded copper conductor, PVC insulated & sheathed FRLSH unarmoured cable as per IS:1554 (Part1), ISI marked, suitable for power & control wiring. | — | — | — | 32,000 | |
| — | 24.00 | — | — | ||
| Computer operator cum stenographer. [2 Nos x 12 Months = 24 Months] | — | — | — | 6,63,000 | |
| — | 200.00 | — | — | ||
| Supplying 1.1 kV grade XLPE insulated galvanized steel wire 2 core 6 sq. mm armoured copper conductor FRLSH sheathed cable | — | — | — | 34,200 | |
| — | 200.00 | — | — | ||
| Laying & erecting 1.1 kV grade XLPE insulated galvanized steel wire armoured 2 core 6 sq. mm armoured copper conductor FRLSH sheathed cable | — | — | — | 3,200 | |
| — | 1000.00 | — | — | ||
| "Supply - 4 core 300 sqmm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 16,00,000 | |
| — | 5000.00 | — | — | ||
| "Erection - 4 core 300 / 240 sqmm Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per specification no. CBLT/ AL. As per ISS and Rly Specification." | — | — | — | 4,65,000 | |
| — | 1000.00 | — | — | ||
| "Supply - 4 core 185 sqmm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 10,15,000 | |
| — | 5000.00 | — | — | ||
| "Erection - 4 core 185 sqmm Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per specification no. CBLT/ AL. As per ISS and Rly Specification." | — | — | — | 3,40,000 | |
| — | 1000.00 | — | — | ||
| "Supply - 4 core 120 sq.mm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 7,13,000 | |
| — | 5000.00 | — | — | ||
| "Erection - 4 core 120 sq.mm Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per specification no. CBLT/ AL. As per ISS and Rly Specification." | — | — | — | 2,35,000 | |
| — | 3000.00 | — | — | ||
| "Supply - 4 core 70 sq.mm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 14,64,000 | |
| — | 1000.00 | — | — | ||
| "Supply - 4 core 50 sq.mm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 3,50,000 | |
| — | 10000.00 | — | — | ||
| "Erection - 4 core 70 / 50 sq.mm Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per specification no. CBLT/ AL. As per ISS and Rly Specification." | — | — | — | 3,20,000 | |
| — | 1000.00 | — | — | ||
| "Supply - 4 core 25 sqmm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 2,19,000 | |
| — | 5000.00 | — | — | ||
| "Erection - 4 core 25 sqmm Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per specification no. CBLT/ AL. As per ISS and Rly Specification." | — | — | — | 1,30,000 | |
| — | 5000.00 | — | — | ||
| "Supply - 4 core 16 sqmm 1100 Volt Grade multi-stranded Aluminium conductor cable having galvanized steel strip armoured, Cross linked polyethylene, insulated, PVC sheathed with extruding process armoured, confirming to IS: 7098(Part 1):1988 with amendment number 1 and 2 and 3 Reaffirmed 2005 & improved fire retardant features as CATEGORY C2 FR-LSH type. " | — | — | — | 8,35,000 | |
| — | 18000.00 | — | — | ||
| "Erection - 4 core 16 sqmm Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per specification no. CBLT/ AL. As per ISS and Rly Specification." | — | — | — | 4,68,000 | |
| — | 40.00 | — | — | ||
| Supply of Heat shrinkable straight through jointing type cable kit for 3/3.5/4 core x 16 - 400 sq. mm cable. | — | — | — | 80,880 | |
| — | 40.00 | — | — | ||
| Erection of Heat shrinkable straight through jointing type cable kit for 3/3.5/4 core x 16 - 400 sq. mm cable. | — | — | — | 10,360 | |
| — | 18000.00 | — | — | ||
| Excavation & Resurfacing of cable trench of size 450 mm wide and 1000 mm deep in soil & refilling trench with sand pebbles etc., after laying of cable complete. As per Rly requirement. (IS 1255) | — | — | — | 31,14,000 | |
| — | 2000.00 | — | — | ||
| Breaking of PCC / Asphalt road for making cable trench of suitable depth as per site requirement and refilling / resurfacing the same and reconstructing the Asphalt road / PCC as in original condition after laying of cable complete. As per Rly requirement. | — | — | — | 85,80,000 | |
| — | 3000.00 | — | — | ||
| Supply of 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete, with coupling for laying of HT/LT Cable as per Railway requirement | — | — | — | 12,21,000 | |
| — | 3000.00 | — | — | ||
| Laying of 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete, with coupling for laying of HT/LT Cable as per Railway requirement | — | — | — | 1,38,000 | |
| — | 8000.00 | — | — | ||
| Supplying 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. | — | — | — | 9,60,000 | |
| — | 8000.00 | — | — | ||
| Laying 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. | — | — | — | 1,04,000 | |
| — | 24.00 | — | — | ||
| Manning and housekeeping of store depot | — | — | — | 5,79,600 | |
| — | 3000.00 | — | — | ||
| Supply of RCC warning cover size 450mm x 180mm x 40mm | — | — | — | 1,95,000 | |
| — | 3000.00 | — | — | ||
| Erection of RCC warning cover size 450mm x 180mm x 40mm | — | — | — | 33,000 | |
| — | 450.00 | — | — | ||
| Supply of RCC pipe 2 meter long, 150 mm diameter with collar at one end | — | — | — | 2,10,150 | |
| — | 450.00 | — | — | ||
| Laying of RCC pipe 2 meter long, 150 mm diameter with collar at one end | — | — | — | 23,400 | |
| — | 15000.00 | — | — | ||
| Supply of RCC 1/2 round pipe 1 meter long, 150 mm diameter | — | — | — | 62,55,000 | |
| — | 15000.00 | — | — | ||
| Laying of RCC 1/2 round pipe 1 meter long, 150 mm diameter | — | — | — | 7,05,000 | |
| — | 50.00 | — | — | ||
| Supply of 75 mm dia GI pipe class B | — | — | — | 32,400 | |
| — | 50.00 | — | — | ||
| Erection of 75 mm dia GI pipe class B | — | — | — | 1,600 | |
| — | 30.00 | — | — | ||
| Supplying GI pipe 100mm dia. 'B' class at position with accessories complete as per specification no. CW-PLB/GP. | — | — | — | 38,880 | |
| — | 30.00 | — | — | ||
| Erecting GI pipe 100mm dia. 'B' class at position with accessories complete as per specification no. CW-PLB/GP. | — | — | — | 4,320 | |
| — | 100.00 | — | — | ||
| Supply of HT / LT cable route marker | — | — | — | 30,000 | |
| — | 100.00 | — | — | ||
| Erection of HT / LT cable route marker | — | — | — | 1,100 | |
| — | 50.00 | — | — | ||
| Supply of Wooden Cleats | — | — | — | 17,150 | |
| — | 50.00 | — | — | ||
| Erection of Wooden Cleats | — | — | — | 850 | |
| — | 30.00 | — | — | ||
| Brick masonry work in cement mortar 1:6 for construction of Manhole of size 1m x 1m x1m including plastering for cable jointing/ terminating & maintenance. | — | — | — | 2,75,220 | |
| — | 30.00 | — | — | ||
| Supply of CI Manhole cover of size 18" x 36" (2 nos for 1 manhole of 100kg each.) | — | — | — | 2,55,750 | |
| — | 30.00 | — | — | ||
| Erection of CI Manhole cover of size 18" x 36" (2 nos for 1 manhole of 100kg each.) | — | — | — | 13,470 | |
| — | 1000.00 | — | — | ||
| Fabrication, Supply of slotted G.I sheet cable tray of size (300mm x 100mm x 3mm) 1000mm long for cable laying on walls/pillars including required fittings clamps & anchor fastners etc. | — | — | — | 16,93,000 | |
| — | 1000.00 | — | — | ||
| Erection of slotted G.I sheet cable tray of size (300mm x 100mm x 3mm) 1000mm long for cable laying on walls/pillars including required fittings clamps & anchor fastners etc. | — | — | — | 1,69,000 | |
| — | 2000.00 | — | — | ||
| Supply of hot dip galvanized of 2500mm long perforated GI cable tray size 200mm X 50 mm X 2 mm with coupling plate nut bolts , washers etc for cable laying on parade shed structure. | — | — | — | 12,66,000 | |
| — | 2000.00 | — | — | ||
| Erection testing & commissioning of hot dip galvanized of 2500mm long perforated GI cable tray size 200mm X 50 mm X 2 mm with coupling plate nut bolts , washers etc for cable laying on parade shed structure. | — | — | — | 64,000 | |
| — | 200.00 | — | — | ||
| Supply of plain type cable tray for cable laying, refrigerant piping and drain pipe with cover size 150mm x 75mm. | — | — | — | 2,07,000 | |
| — | 200.00 | — | — | ||
| Installation of plain type cable tray for cable laying, refrigerant piping and drain pipe with cover size 150mm x 75mm. | — | — | — | 23,000 | |
| — | 200.00 | — | — | ||
| Supply of cable tray, plain type cable tray for cable laying, refrigerant piping and drain pipe with cover size 100mm x 75mm. | — | — | — | 1,74,400 | |
| — | 200.00 | — | — | ||
| Installation of cable tray, plain type cable tray for cable laying, refrigerant piping and drain pipe with cover size 100mm x 75mm. | — | — | — | 19,600 | |
| — | 1700.00 | — | — | ||
| Supply of 200 mm OD, PE 80, PN 6, HDPE Pipe. Laying of pipes by microtunneling in bores using computer guided machine with suitable couplers and all accesories. Inclusive of laying of Electric cables in HDPE pipes. Cost of all materials, labour, hiring charges of tools, plants, machineries etc. transportations, are to be borne by the contractor. (Work to be started after obtaining permission from this office, No of bores and length of bores as per Rly requirement). Cable will be supplied by rly from KYN / JNJ Stores. | — | — | — | 4,76,05,100 | |
| — | 100.00 | — | — | ||
| Core cutting at Slab area dia 50 - 200 mm | — | — | — | 1,06,100 | |
| — | 2.00 | — | — | ||
| Supplying compact substation with 3 phase, 11/0.433 kV, 50 Hz., 630 kVA, Mineral oil immersed Copper wound, without gas cushioning, hermetically Sealed transformer having indoor type transformer bushings, with HT side (incoming side) Circuit Breaker of appropriate rating & capacity and LT side (outgoing side) MCCBs (4 pole) of appropriate capacity, with inbuilt metering cubical having 3 epoxy coated CT's with CT Ratio ......./5 A, 10 or 15VA Burden, 0.5S Accuracy Class, & 3 epoxy coated PT's with PT Ratio 11/0.110KV, 10 or 15 VA Burden, 0.5S Accuracy Class properly arranged in standard MSEDCL approved enclosure, using type A winding insulation (kraft paper), standard accessories complete with test certificate with losses below 1860 Watts at 50% load, 5300 Watts at 100% load for transformer, as per IS:1180 (part 1) : 2014 , with necessary permissions of Electrical Inspectors, as per specification no SS-TR-CS | — | — | — | 55,04,430 | |
| — | 2.00 | — | — | ||
| Installing, testing & commissioning compact substation with 3 phase, 11/0.433 kV, 50 Hz., 630 kVA, Mineral oil immersed Copper wound, without gas cushioning ,hermetically Sealed transformer having indoor type transformer bushings, with HT side (incoming side) Circuit Breaker of appropriate rating & capacity and LT side (outgoing side) MCCBs (4 pole) of appropriate capacity, with inbuilt metering cubical having 3 epoxy coated CT's with CT Ratio ......./5 A, 10 or 15VA Burden, 0.5S Accuracy Class, & 3 epoxy coated PT's with PT Ratio 11/0.110KV, 10 or 15 VA Burden, 0.5S Accuracy Class properly arranged in standard MSEDCL approved enclosure, using type A winding insulation (kraft paper), standard accessories complete with test certificate with losses below 1860 Watts at 50% load, 5300 Watts at 100% load for transformer, as per IS:1180 (part 1) : 2014 , with necessary permissions of Electrical Inspectors, as per specification no SS-TR-CS | — | — | — | 6,11,604 | |
| — | 6.00 | — | — | ||
| Excavation of Earth and Casting of foundations (M - 10) In hard soil | — | — | — | 21,792 | |
| — | 6.00 | — | — | ||
| Excavation of Earth and Casting of foundations (M - 10) In rocky soil | — | — | — | 20,136 | |
| — | 12.00 | — | — | ||
| Excavation of Earth and Casting of foundations (M - 10) In other than hard & rocky soil | — | — | — | 33,864 | |
| — | 2.00 | — | — | ||
| Supply of contactor switched standard Automatic Power Factor Correction Panel of 75kVAr capacity as per enclosed detailed specification and relevant standards | — | — | — | 3,50,984 | |
| — | 2.00 | — | — | ||
| Erection, testing and commissioning of contactor switched standard Automatic Power Factor Correction Panel of 75kVAr capacity as per enclosed detailed specification and relevant standards | — | — | — | 38,998 | |
| — | 4.00 | — | — | ||
| Supplying 11 kV 630A, indoor type ring main unit with 1 VCB & 2 LBS with internal arc compliance complete erected on provided CC foundation/MS channels/trench, etc., as per specification no SW-HTS / RMU | — | — | — | 19,49,672 | |
| — | 4.00 | — | — | ||
| Installing, testing and commissioning 11 kV 630A, indoor type ring main unit with 1 VCB & 2 LBS with internal arc compliance complete erected on provided CC foundation/MS channels/trench, etc., as per specification no SW-HTS / RMU | — | — | — | 2,16,632 | |
| — | 4.00 | — | — | ||
| Foundation structure for RMU for cable entry, etc. | — | — | — | 90,436 | |
| — | 10.00 | — | — | ||
| Supply of rubber matting electricals insulated of 12 mm thick, 1Mtrs width and 2 Mtrs long as per ISS | — | — | — | 27,300 | |
| — | 6.00 | — | — | ||
| Inspection fee for BEST/MSEB/PWD, including all the charges for Estimate, WCR & EIG. | — | — | — | 2,00,400 | |
| — | 1.00 | — | — | ||
| Supply of Galavanised fencing uprights. | — | — | — | 63,721 | |
| — | 1.00 | — | — | ||
| Erection of Galavanised fencing uprights. | — | — | — | 6,564 | |
| — | 30.00 | — | — | ||
| Supply of Galavanised fencing panel. | — | — | — | 90,180 | |
| — | 30.00 | — | — | ||
| Erection of Galavanised fencing panel. | — | — | — | 5,820 | |
| — | 12.00 | — | — | ||
| Supply of gate with hinges & locking arrangement consisting of GI angle/ flat & GI wire mesh duly painted (As per Railway / MSEDCL's specification.) | — | — | — | 29,256 | |
| — | 12.00 | — | — | ||
| Erection of gate with hinges & locking arrangement consisting of GI angle/ flat & GI wire mesh duly painted (As per Railway / MSEDCL's specification.) | — | — | — | 1,464 | |
| — | 3.00 | — | — | ||
| Fabrication, supply and erection of stand of fire buckets as per Standards along with Six Numbers of fire buckets each of 10 litre capacity, filled with Coares, River sand and painted in red with white letters. | — | — | — | 19,635 | |
| — | 20.00 | — | — | ||
| Supply and fixing on wall of DCP 5 / 6 kg Portable Fire Extinguisher as per IS 15683 (2018) complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. | — | — | — | 1,45,400 | |
| — | 20.00 | — | — | ||
| Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete. | — | — | — | 2,34,660 | |
| — | 20.00 | — | — | ||
| Supply and installation of fire extinguisher as per latest BIS 15683:2018 of 4 kg capacity, with nonconductive up-to 100KV (tested by ERDA) UL approved clean gas agent with auto manual reverse stainless steel valve having apacity 4 kg and made up of stainless steel 304 grade cylinder pressure 14 bar, range 3-4 meters, valve body pressure diecasted SS-304 unique valve with leak proof design, delivery method Nozzle with Flexible Hose pipe, UL listed HFC-236fa clean agent, accessories Heavy duty wall mounting bracket alone with Fire extinguisher, clean gas shelf life with 10 years OEM warranty for leakage as per specification, SS-304 safety pin, NABL test certificate for clean gas, BIS certificate to be submitted with offer. Detailed specifications are as per annexure attached. Sample to be approved first before bulk supply. | — | — | — | 6,74,720 | |
| — | 3.00 | — | — | ||
| Supply of First Aid equipments in box and stretcher folding type. | — | — | — | 13,155 | |
| — | 4.00 | — | — | ||
| Supplying and fixing standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, antiseptic solution, etc. (All above contents shall be of standard makes) | — | — | — | 4,352 | |
| — | 4.00 | — | — | ||
| Supply of Hand Gloves suitable for working on 33 kv or above system in pair as per IS :4770 or latest. | — | — | — | 2,616 | |
| — | 4.00 | — | — | ||
| Supply of digital multimeter 3 1/2 digit, hand held, battery operated for(0 to 200 mv / 2V/20V/200V/ 1000V) DC,(0 to 200mv/2V/ 20V/ 200V/750V)AC,(0 to 200 micro A/2mA /20mA/200mA/ 2A/10A) DC,(0 to 2mA/200m A/10A) AC, (0-200ohms/2K/20K/200K/2M/ 20M ohm)having diode & continuity checks | — | — | — | 13,776 | |
| — | 4.00 | — | — | ||
| Supply of insulation tester (Megger) 2500 V alongwith carrying case, test leads, etc. | — | — | — | 23,612 | |
| — | 4.00 | — | — | ||
| Supply of tong tester range 0 - 1000 A, voltage range 0 - 600 V, alongwith carrying case, test leads, etc. | — | — | — | 15,828 | |
| — | 8.00 | — | — | ||
| Supply of Clamp - ON Type Earth Resistance Tester | — | — | — | 51,696 | |
| — | 4.00 | — | — | ||
| Supply of heavy duty hammer drill machine. | — | — | — | 31,864 | |
| — | 4.00 | — | — | ||
| Supply of tool box complete with required size of box spanner, 'D" spanner, screw driver, ball pen hammer, set of allen keys etc. | — | — | — | 9,912 | |
| — | 4.00 | — | — | ||
| Supply of self supporting ladder 8 feet | — | — | — | 22,500 | |
| — | 2.00 | — | — | ||
| Supply of self supporting ladder 16 feet | — | — | — | 19,750 | |
| — | 2.00 | — | — | ||
| Supply of fuse link rod of suitable length for fixing and removing of DO fuses | — | — | — | 5,984 | |
| — | 2.00 | — | — | ||
| Supply of earth discharge rod with suitable length of flexible copper wire for earthing | — | — | — | 5,610 | |
| — | 1.00 | — | — | ||
| Provision of printing the substation Electrical Drawing in the Flex (Approx. Size 6 Sq feet) and same has to be fixed in the suitable location as directed at site Engineer. | — | — | — | 2,992 | |
| — | 4.00 | — | — | ||
| Electric shock treatment and management chart made from 19mm thickness premium sun board base and multi color glossy ECO print sheet pasted on it framed in thick aluminium frame. Displaying the instructions for electric shock traetment in in Tri Language Marathi, English & Hindi. 02 nos. of hanging clip attached on top. Dimension: 600mm (H) x 900mm (W) | — | — | — | 4,620 | |
| — | 4.00 | — | — | ||
| Supply and fixing of HT Danger Board of size 400 x300x3 mm thick indicating skull bone marked "DANGER" 11/ 22 KV HT/LT to be provided in Tri Language Marathi, English & Hindi as per IS. No: 2551, along with clamps made out of 25 mm X 4 mm size, including bolts & nuts for fixing on structures and painting as instructed by Engineer-in-charge at site. | — | — | — | 1,096 | |
| — | 300.00 | — | — | ||
| Supply of maintenance free earthing using copper coated steel rods compression coupler as per RDSO specification No. RDSO/PE/SPEC/PS/0109-2008 (Rev-"0") or latest, with approved enhancing compound and exothermic welding | — | — | — | 20,79,300 | |
| — | 300.00 | — | — | ||
| Erection, testing and commissioning of maintenance free earthing using copper coated steel rods compression coupler as per RDSO specification No. RDSO/PE/SPEC/PS/0109-2008 (Rev-"0") or latest, with approved enhancing compound and exothermic welding | — | — | — | 5,79,600 | |
| — | 1000.00 | — | — | ||
| Supply of earthing G.I. PIPE with cement concrete earth chamber, charcol, salt etc. | — | — | — | 14,07,000 | |
| — | 1000.00 | — | — | ||
| Erection of earthing G.I. PIPE with cement concrete earth chamber, charcol, salt etc. | — | — | — | 1,56,000 | |
| — | 5000.00 | — | — | ||
| Supply of 25mmx 3mm G.I. earth strip for connecting earth station to controlling boards | — | — | — | 7,55,000 | |
| — | 5000.00 | — | — | ||
| Laying & connecting 25mmx 3mm G.I. earth strip for connecting earth station to controlling boards | — | — | — | 1,30,000 | |
| — | 3000.00 | — | — | ||
| Supply of 8 SWG GI Wire and connecting to various earth points. | — | — | — | 15,000 | |
| — | 3000.00 | — | — | ||
| Laying & Connecting of 8 SWG GI Wire and connecting to various earth points. | — | — | — | 6,000 | |
| — | 200.00 | — | — | ||
| Supply of 25 mm x 3 copper strip for earthing. | — | — | — | 25,200 | |
| — | 200.00 | — | — | ||
| Laying & connecting 25 mm x 3 copper strip for earthing. | — | — | — | 7,800 | |
| — | 20.00 | — | — | ||
| Supply of material of Copper plate earthing 600mm x 600mm x 6 mm for neutral as per IS-3044 | — | — | — | 1,77,060 | |
| — | 20.00 | — | — | ||
| Installation, testing & commissioning of Copper plate earthing 600mm x 600mm x 6 mm for neutral as per IS-3045 | — | — | — | 19,680 | |
| — | 30.00 | — | — | ||
| Supply of Marine plywood (28'x6')x2 mtr for switchgear | — | — | — | 8,820 | |
| — | 30.00 | — | — | ||
| Erection of Marine plywood (28'x6')x2 mtr for switchgear | — | — | — | 480 | |
| — | 2.00 | — | — | ||
| Supply of 3 phase, 22/0.4kv, 100 KVA transformer oil cooled, O/D type, with all accessories as per IS 1180 (PART 1): 2014 Energy Efficient level 3 or above | — | — | — | 5,69,764 | |
| — | 2.00 | — | — | ||
| Erection, testing & commissioning of 3 phase, 22/0.4kv, 100 KVA transformer oil cooled, O/D type, with all accessories as per IS 1180 (PART 1): 2014 Energy Efficient level 3 or above | — | — | — | 63,306 | |
| — | 2.00 | — | — | ||
| Supply of distribution box with MCCBs suitable for 100 - 500 KVA transformer as per MSEDCL specification. | — | — | — | 60,964 | |
| — | 2.00 | — | — | ||
| Erection of distribution box with MCCBs suitable for 100 - 500 KVA transformer as per MSEDCL specification. | — | — | — | 3,050 | |
| — | 2.00 | — | — | ||
| Supply of 3 phase, 22/0.4kv, 315 KVA transformer oil cooled, O/D type, with all accessories as per IS 1180 (PART 1): 2014 Energy Efficient level 3 or above | — | — | — | 13,48,886 | |
| — | 2.00 | — | — | ||
| Erection, testing & commissioning of 3 phase, 22/0.4kv, 315 KVA transformer oil cooled, O/D type, with all accessories as per IS 1180 (PART 1): 2014 Energy Efficient level 3 or above | — | — | — | 1,49,878 | |
| — | 1.00 | — | — | ||
| Supply of 22 Kv SF6 Ring main unit complete extensible Outdoor Motar Type 4 way (3 Isolator + 1 Breaker ) as per MSEDCL. | — | — | — | 8,09,375 | |
| — | 1.00 | — | — | ||
| Installation, testing & commissioning of 22 Kv SF6 Ring main unit complete extensible Outdoor Motar Type 4 way (3 Isolator + 1 Breaker ) as per MSEDCL. | — | — | — | 1,21,406 | |
| — | 4.00 | — | — | ||
| Supply of Indoor Touch Proof cable end termination for 22 kv, 3 core, 300 Sq.mm, XLPE cable | — | — | — | 88,608 | |
| — | 4.00 | — | — | ||
| Erection of Indoor Touch Proof cable end termination for 22 kv, 3 core, 300 Sq.mm, XLPE cable | — | — | — | 13,292 | |
| — | 4.00 | — | — | ||
| Supply of 22kV 3 phase AB switch 200A cap. alongwith GOD operating switch assembly inclusive insulator & flexible jumper | — | — | — | 64,852 | |
| — | 4.00 | — | — | ||
| Erection of 22kV 3 phase AB switch 200A cap. alongwith GOD operating switch assembly inclusive insulator & flexible jumper | — | — | — | 6,484 | |
| — | 4.00 | — | — | ||
| Supply of 22kV 3 ph. H.G. (D.O) fuse assembly complete inclusive insulator flexible jumpers. | — | — | — | 19,672 | |
| — | 4.00 | — | — | ||
| Erection of 22kV 3 ph. H.G. (D.O) fuse assembly complete inclusive insulator flexible jumpers. | — | — | — | 984 | |
| — | 20.00 | — | — | ||
| Supply of 22kV pin insulator including pin and nut bolt, check nuts etc. | — | — | — | 8,540 | |
| — | 20.00 | — | — | ||
| Erection of 22kV pin insulator including pin and nut bolt, check nuts etc. | — | — | — | 860 | |
| — | 100.00 | — | — | ||
| Supplying of XLPE insulated galvanised steel formed wire armoured (strip) cable 22 kV(E), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB- HT, confirming to IS:7098(pt-II) 2011 or latest. | — | — | — | 1,88,800 | |
| — | 500.00 | — | — | ||
| Supply of 22 kV Grade HT 3 Core X 300 Sq.mm, Alluminium XLPE insulated extruded PVC sheathed, armoured with galvanized steel round wire armoured extruded PVC outer sheathed cable confirming to IS:7098(pt-II) 2011 or latest | — | — | — | 11,30,000 | |
| — | 1000.00 | — | — | ||
| Erection, Transportation & laying of 22/33kV grade 300 / 240 / 95 sqmm, 3 Core, XLPE cable as per ISS:7089 (Cable shall be supplied by Rly. at Store Depot, Kalyan/Juinagar). | — | — | — | 77,000 | |
| — | 4.00 | — | — | ||
| Supply of heat shrinkable straight through joints suitable for 22/33 KV grade 3 X 240/300 sq mm Aluminium conductor cable XLPE. | — | — | — | 1,86,900 | |
| — | 4.00 | — | — | ||
| Making and commissioning of heat shrinkable straight through joints suitable for 22/33 KV grade 3 X 240/300 sq mm Aluminium conductor cable XLPE. | — | — | — | 408 | |
| — | 4.00 | — | — | ||
| Supply of end termination outdoor type 22/33kV grade 300 sqmm/240 sqmm, 3 Core XLPE cable as per relevant ISS. | — | — | — | 60,832 | |
| — | 4.00 | — | — | ||
| Erection of end termination outdoor type 22/33kV grade 300 sqmm/240 sqmm, 3 Core XLPE cable as per relevant ISS. | — | — | — | 3,300 | |
| — | 2.00 | — | — | ||
| Supply of 500 KVA 2.2KV / 433 V Transformer. | — | — | — | 29,20,480 | |
| — | 2.00 | — | — | ||
| Installation, testing and commissioning of 500 KVA 2.2KV / 433 V Transformer. | — | — | — | 1,77,448 | |
| — | 83.00 | — | — | ||
| Supply - 3 core 185 sq.mm, Al conductor, Armoured, XLPE Cable, 6.6 KV grade as per IS 7098 (Part 1) | — | — | — | 1,16,532 | |
| — | 5000.00 | — | — | ||
| "Erection - 3 core 185 sqmm, 6.6 kv cable Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per ISS and Rly Specification." | — | — | — | 3,40,000 | |
| — | 500.00 | — | — | ||
| Supply of 11 KV (E) XLPE HT cable standard compact circular Alumn. Conductor XLPE insulated screened with extruded semi conducting compound in combination with copper tape inner sheathed of PVC sheathed cable suitable for 11000 V grade conforming to IS:7098 (Pt.-II) 1985 with latest amdt. Of size 3 Core X 240 Sq.mm, | — | — | — | 8,95,500 | |
| — | 3000.00 | — | — | ||
| "Erection - 3 core 240/300 sqmm, 11 kv cable Transportation, Laying, testing & commissioning XLPE armoured cable aluminium conductor with continuous 12 / 8 SWG G.I. earth wire complete erected with glands & lugs, on wall / trusses / pole / trays / clamps or laid in provided trench / pipe as per ISS and Rly Specification." | — | — | — | 2,55,000 | |
| — | 2.00 | — | — | ||
| Supply of heat shrnkable straight through joint outdoor/indoor suitable for 6.6 / 11 kV Grade, 3X185 / 240 / 300 sq.mm AL conductor, XLPE Cable. | — | — | — | 42,412 | |
| — | 2.00 | — | — | ||
| Erection & Commissioning of heat shrnkable straight through joint outdoor/indoor suitable for 6.6 / 11 kV Grade, 3X185 / 240 / 300 sq.mm AL conductor, XLPE Cable. | — | — | — | 1,884 | |
| — | 2.00 | — | — | ||
| Supply of heat shrnkable end termination outdoor/indoor suitable for 6.6 kV Grade, 3X185 sq.mm AL conductor, XLPE Cable. | — | — | — | 8,330 | |
| — | 2.00 | — | — | ||
| Erection & Commissioning of heat shrnkable end termination outdoor/indoor suitable for 6.6 kV Grade, 3X185 sq.mm AL conductor, XLPE Cable. | — | — | — | 888 | |
| — | 4.00 | — | — | ||
| Supply of indoor/outdoor type heat shrinkable end termination cable joint kit 11 KV HT AL 3 core 240 / 300 sq.mm cable. | — | — | — | 37,696 | |
| — | 4.00 | — | — | ||
| Erection, testing & commissioning of indoor/outdoor type heat shrinkable end termination cable joint kit 11 KV HT AL 3 core 240 / 300 sq.mm cable. | — | — | — | 1,880 | |
| — | 2.00 | — | — | ||
| Supplying 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. | — | — | — | 16,096 | |
| — | 2.00 | — | — | ||
| Erecting 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. | — | — | — | 1,788 | |
| — | 2.00 | — | — | ||
| Supplying 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm. | — | — | — | 10,104 | |
| — | 2.00 | — | — | ||
| Erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm. | — | — | — | 1,122 | |
| — | 4.00 | — | — | ||
| Supply of lightening arrestors 11kV HT supply with mounting arrangement as per the MSEB's / BEST specn. | — | — | — | 23,720 | |
| — | 4.00 | — | — | ||
| Erection of lightening arrestors 11kV HT supply with mounting arrangement as per the MSEB's / BEST specn. | — | — | — | 1,192 | |
| — | 40.00 | — | — | ||
| Supply of 11kV, 45 KN Disc insulators to form strings for 22kV line anchoring. | — | — | — | 32,360 | |
| — | 40.00 | — | — | ||
| Erection of 11kV, 45 KN Disc insulators to form strings for 22kV line anchoring. | — | — | — | 3,240 | |
| — | 20.00 | — | — | ||
| Supply of Strain hardware for ACSR DOG conductor. | — | — | — | 7,760 | |
| — | 20.00 | — | — | ||
| Erection of Strain hardware for ACSR DOG conductor. | — | — | — | 780 | |
| — | 20.00 | — | — | ||
| Supply of HT Stay sets with turn buckle, anchor plate etc. | — | — | — | 14,000 | |
| — | 20.00 | — | — | ||
| Erection of HT Stay sets with turn buckle, anchor plate etc. | — | — | — | 1,400 | |
| — | 0.50 | — | — | ||
| Supply of ACSR DOG conductor. | — | — | — | 36,918.5 | |
| — | 0.50 | — | — | ||
| Stringing of ACSR DOG conductor. | — | — | — | 1,846 | |
| — | 100.00 | — | — | ||
| Supply, spreading of Sand | — | — | — | 34,500 | |
| — | 3.00 | — | — | ||
| Supply of M.S. structures (RSJ poles) as per MSEDCL specifications | — | — | — | 1,56,906 | |
| — | 3.00 | — | — | ||
| Erection, testing commissioning of M.S. structures (RSJ poles) as per MSEDCL specifications | — | — | — | 15,693 | |
| — | 50.00 | — | — | ||
| Supply of materials and preparation of foundation / muffing for poles with C.C. mixture of 1:3:6 ratio | — | — | — | 1,26,200 | |
| — | 10.00 | — | — | ||
| Supply of anticlimbing device | — | — | — | 7,250 | |
| — | 10.00 | — | — | ||
| Erection of anticlimbing device | — | — | — | 1,110 | |
| — | 20.00 | — | — | ||
| Supply of danger board inlcuding fixing arrangement & necessary hardware. | — | — | — | 10,040 | |
| — | 20.00 | — | — | ||
| Erection of danger board inlcuding fixing arrangement & necessary hardware. | — | — | — | 2,220 | |
| — | 1000.00 | — | — | ||
| Supply, fabrication of G.I. Flat of various sizes. | — | — | — | 80,000 | |
| — | 1000.00 | — | — | ||
| Erection of G.I. Flat of various sizes. | — | — | — | 8,000 | |
| — | 20.00 | — | — | ||
| Hiring of cable fault locator for detecting of LT & HT cable fault in existing cables of various sizes & voltage grades | — | — | — | 2,15,840 | |
| — | 5.00 | — | — | ||
| Supply, painting of Red Oxide paint | — | — | — | 345 | |
| — | 5.00 | — | — | ||
| Supply, painting of Aluminium paint | — | — | — | 600 | |
| — | 2.00 | — | — | ||
| Supply of 1 HP, 1 phase open well submersible water pump, alongwith suitable starter panel as per railway requirement. | — | — | — | 27,136 | |
| — | 2.00 | — | — | ||
| Erection and Installation 1 HP, 1 phase open well submersible water pump, alongwith suitable starter panel as per railway requirement. | — | — | — | 2,714 | |
| — | 2.00 | — | — | ||
| Transportation of tools & plants, man, materials at site as per Railways requirement. | — | — | — | 13,79,808 | |
| — | 2.00 | — | — | ||
| Supplying of minimum three & above star rated submersible pump set for open well of 2.25 kW / 3 HP with 415 V, three phase, 50 Hz, A.C. supply as per specification no. WP-OSP. | — | — | — | 42,506 | |
| — | 2.00 | — | — | ||
| Erection, testing and commissioning of minimum three & above star rated submersible pump set for open well of 2.25 kW/ 3 HP with 415 V, three phase, 50 Hz, A.C. supply as per specification no. WP-OSP. | — | — | — | 3,924 | |
| — | 4.00 | — | — | ||
| Supply of 3 HP / 5 HP Starters Control Panel for Submersible Pump | — | — | — | 30,568 | |
| — | 4.00 | — | — | ||
| Erection, testing and commissioning of 3 HP / 5 HP Starters Control Panel for Submersible Pump | — | — | — | 3,060 | |
| — | 2.00 | — | — | ||
| Supply of submersible motor pump set 5 HP 3 phase 415 volt. AC 50 Hz, confirm to IS no 8034/2002 or latest. | — | — | — | 51,566 | |
| — | 2.00 | — | — | ||
| Erection, testing & commissioning of submersible motor pump set 5 HP 3 phase 415 volt. AC 50 Hz, confirm to IS no 8034/2002 or latest. | — | — | — | 3,924 | |
| — | 2.00 | — | — | ||
| Supply of 7.5 HP open well type submersible pumpset as per site requirement | — | — | — | 56,168 | |
| — | 2.00 | — | — | ||
| Erection, testing & commissioning of 7.5 HP open well type submersible pumpset as per site requirement | — | — | — | 3,062 | |
| — | 2.00 | — | — | ||
| Supply of control Panel for submersible pump of 3 phase, 7.5 HP | — | — | — | 25,594 | |
| — | 2.00 | — | — | ||
| Erection, testing and commissioning of control Panel for submersible pump of 3 phase, 7.5 HP | — | — | — | 1,452 | |
| — | 1.00 | — | — | ||
| Supply of openwell, vertical type, water cooled submersible pump set BEE 5 star or highest rating of capacity 20 HP, 3 Ph, 415 Volts, 50 Hz AC supply complete with SS/Al. Bronz impeller confirming to IS-14220-1984 (or latest) with all accessories as per site requirement. | — | — | — | 87,033 | |
| — | 1.00 | — | — | ||
| Installation, Testing & Commissioning of openwell, vertical type, water cooled submersible pump set BEE 5 star or highest rating of capacity 20 HP, 3 Ph, 415 Volts, 50 Hz AC supply complete with SS/Al. Bronz impeller confirming to IS-14220-1984 (or latest) with all accessories as per site requirement. | — | — | — | 9,671 | |
| — | 50.00 | — | — | ||
| Supply of 4 Core, 6 Sq mm (Cu), 1.1 Kv grade, XLPE insulated with armoured cable and FR-LSH outer sheath suitable for submersible pump. | — | — | — | 14,100 | |
| — | 50.00 | — | — | ||
| Laying, fixing, erection of 4 Core, 6 Sq mm (Cu), 1.1 Kv grade, XLPE insulated with armoured cable and FR-LSH outer sheath suitable for submersible pump. | — | — | — | 1,350 | |
| — | 1.00 | — | — | ||
| Supplying of automatic control panel for three phase, 415 V, A.C. supply submersible/centrifugal pump set upto 20 HP consisting of star delta starter having relay range 28- 42 A, S.P.P., combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated vibration proof enclosure with IP54 protection with single phasing, phase reversal, phase imbalance, etc . | — | — | — | 15,369 | |
| — | 1.00 | — | — | ||
| Erecting, testing and commissioning of automatic control panel for three phase, 415 V, A.C. supply submersible/centrifugal pump set upto 20 HP consisting of star delta starter having relay range 28-42 A, S.P.P., combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated vibration proof enclosure with IP54 protection with single phasing, phase reversal, phase imbalance, etc . | — | — | — | 1,708 | |
| — | 250.00 | — | — | ||
| Supply, installation of C Class GI Pipe of 2-6 inch dia | — | — | — | 74,750 | |
| — | 15.00 | — | — | ||
| Supply, installation of Galvanised Malleable Iron coupling 2-6 inch dia | — | — | — | 4,680 | |
| — | 15.00 | — | — | ||
| Supply, installation of Galvanised Malleable Iron bends 2-6 inch dia | — | — | — | 16,170 | |
| — | 15.00 | — | — | ||
| Supply, installation of Galvanised Malleable Iron flange 2-6 inch dia | — | — | — | 2,430 | |
| — | 6.00 | — | — | ||
| Supply, installation of 2-6 inch dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV | — | — | — | 44,334 | |
| — | 6.00 | — | — | ||
| Supply, installation of 2-6 inch dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV | — | — | — | 10,788 | |
| — | 6.00 | — | — | ||
| Supply, installation of 2-6 inch dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV | — | — | — | 45,588 | |
| — | 1.00 | — | — | ||
| Supply, installation and perfect aligning of 60 HP fire service main centrifugal pump. Pumpset shall be complete with drive, coupling guard, base plate, matching flange, foundation bolts alignment, grouting, etc with all accessories. | — | — | — | 4,06,838 | |
| — | 1.00 | — | — | ||
| Supply, installing and commissioning of Jockey/Booster pump 3 Phase, 10 HP and above of suitable HP as per site requirment Complete with drive, coupling guard, base plate, matching flange, foundation bolts alignment, grouting, etc with all accessories. | — | — | — | 85,257 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing, commissioning of engine driven firefigthing pump model Nos KFE-E1110R-G02 with 72 HP/2150 RPM radiator control diesel engine Complete with drive, coupling guard, base plate, matching flange, foundation bolts alignment, grouting, etc with all accessories. | — | — | — | 4,37,562 | |
| — | 1.00 | — | — | ||
| Fabrication, supply of common control panel for all type of panels. RDSO Approved. As per site requirement. | — | — | — | 2,80,559 | |
| — | 1.00 | — | — | ||
| "Installing, testing, commissiong of common control panel for all type of panels. RDSO Approved. As per site requirement." | — | — | — | 14,028 | |
| — | 1.00 | — | — | ||
| Supply, fixing of earthing for main electrical panel, pressurization pump & diesel engine driven pump complete with GI Strip 25 X 3 with all required termination material like ligs etc. 12V battery with leades, 200 litres fuel tank for diesel engine pmp, airvessal tank along with stand, self primming arrangment of pumps, suitable foundation of pumps. asper RDSO Specification | — | — | — | 2,94,802 | |
| — | 250.00 | — | — | ||
| Supply, installation of 150 mm dia GI pipe C class with red color painting as per fire norms. | — | — | — | 6,73,000 | |
| — | 140.00 | — | — | ||
| Supply, installation of 80 mm dia GI pipe C class with red color painting as per fire norms. | — | — | — | 2,85,880 | |
| — | 200.00 | — | — | ||
| Supply, installation of 50 mm dia GI pipe C class with red color painting as per fire norms. | — | — | — | 3,08,200 | |
| — | 50.00 | — | — | ||
| Supply, installation of 25 mm dia GI pipe C class with red color painting as per fire norms. | — | — | — | 32,400 | |
| — | 2.00 | — | — | ||
| Supply, installation of Ball valve of 150 mm size | — | — | — | 47,270 | |
| — | 2.00 | — | — | ||
| Supply, installation of Ball valve of 100 mm size | — | — | — | 35,270 | |
| — | 12.00 | — | — | ||
| Supply, installation of Ball valve of 25 mm size | — | — | — | 23,952 | |
| — | 18.00 | — | — | ||
| Supply, installation of butterfly valve of 150 mm size | — | — | — | 3,61,494 | |
| — | 18.00 | — | — | ||
| Supply, installation of butterfly valve of 100 mm size | — | — | — | 3,17,430 | |
| — | 5.00 | — | — | ||
| Supply, installation of NRV valve of 150 mm size | — | — | — | 1,18,175 | |
| — | 2.00 | — | — | ||
| Supply, installation of NRV valve of 100 mm size | — | — | — | 35,270 | |
| — | 2.00 | — | — | ||
| Supply, installation of NRV 50 / 65 mm dia. in position made of gun metal complete. | — | — | — | 4,138 | |
| — | 5.00 | — | — | ||
| Supply, installation of Pressure gauge 150 PSI | — | — | — | 12,255 | |
| — | 5.00 | — | — | ||
| Supply, installation of Pressure switch. | — | — | — | 19,355 | |
| — | 8.00 | — | — | ||
| Supply, installation gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV | — | — | — | 75,800 | |
| — | 1.00 | — | — | ||
| Executive Table with Side Storage Unit | — | — | — | 94,400 | |
| — | 8.00 | — | — | ||
| Supply, installation wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) alongwith necessary accessories complete as per specification no. FF-FFA/HV | — | — | — | 66,296 | |
| — | 8.00 | — | — | ||
| Supply, installation M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) | — | — | — | 1,30,464 | |
| — | 8.00 | — | — | ||
| Supplying, erecting, testing and commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of 700mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP | — | — | — | 5,992 | |
| — | 500.00 | — | — | ||
| Design, manufacture of wall / hanging / floormounting type LED illuminated sign /direction boards in half elliptical/ Parabolic/ Triangular shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendared vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq.ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. | — | — | — | 8,26,000 | |
| — | 500.00 | — | — | ||
| Display, installation of wall / hanging / floor mounting type LED illuminated sign /direction boards in half elliptical/ Parabolic/ Triangular shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendared vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wallmounting, ceiling mounting, pole mountingor floor mounting and as per siterequirement. The signage shall have theintegral mounting arrangements with sturdystructural frame and ACP cladding on theback side of the signage to avoid rusting andentry of dust. The LED board shall have uniform illumination with 4-8 W / sq.ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. | — | — | — | 82,500 | |
| — | 3.00 | — | — | ||
| Supply of Aluminium extruded M.S. Pole for Triangular information sign board at Taxi/ Auto/ parking. | — | — | — | 13,542 | |
| — | 3.00 | — | — | ||
| Erection, testing and commissioning of Aluminium extruded M.S. Pole for Triangular information sign board at Taxi/ Auto/ parking. | — | — | — | 1,353 | |
| — | 35.00 | — | — | ||
| Supply of station / building name board LED type in Hindi and Marathi complete. (1 no. = 1 letter) | — | — | — | 1,58,375 | |
| — | 35.00 | — | — | ||
| Erection, testing & commissioning of station / building name board LED type in Hindi and Marathi complete. (1 no. = 1 letter) | — | — | — | 16,275 | |
| — | 50.00 | — | — | ||
| Supply portion of SETC of station / building name board LED type in English complete. (1no. = 1 letter) | — | — | — | 1,74,600 | |
| — | 50.00 | — | — | ||
| Erection portion of SETC of station / building name board LED type in English complete. (1 no. = 1 letter) | — | — | — | 23,250 | |
| — | 25.00 | — | — | ||
| Provision of warning / informative photo luminescent sign boards | — | — | — | 24,600 | |
| — | 30.00 | — | — | ||
| VINYLE TAPE size 40 mm x 10 Mtr | — | — | — | 69,360 | |
| — | 2.00 | — | — | ||
| Executive Table with Side Storage Unit | — | — | — | 1,17,970 | |
| — | 10.00 | — | — | ||
| EXIT (EMERGENCY EXIT LIGHT) | — | — | — | 36,340 | |
| — | 30.00 | — | — | ||
| Supply, erection, testing and commissioning of LED Wall Washertype, 36W, RGBW, DC 24V or similar | — | — | — | 3,01,590 | |
| — | 30.00 | — | — | ||
| Supply, erection, testing and commissioning of LED projector type, 48W-50W, RGBW, DC 24V or similar | — | — | — | 4,51,680 | |
| — | 30.00 | — | — | ||
| Supply, erection, testing and commissioning of LED flood light type,125-150W, RGBW, AC 220V or similar | — | — | — | 9,71,070 | |
| — | 30.00 | — | — | ||
| Supply, Erection, Testing and commissioning of colour changing RGBW LED flood light weather proof with inbuilt DMX chip control, system lumen should be 1900 lumen or more, Wattage of luminaire- 45 Watt to 58 Watt, complete with all other accessories. | — | — | — | 2,30,970 | |
| — | 120.00 | — | — | ||
| Supply, Installation, Testing & Commissioning of flexible LED Strip-Warm White /RGB (CCT 3000K) outdoor type, flexible LED Strip IP67 | — | — | — | 2,16,120 | |
| — | 3.00 | — | — | ||
| Cervical Stand | — | — | — | 26,190 | |
| — | 30.00 | — | — | ||
| Supply & Fixing of 15 W Bollard Lights (Warm White) with all associated civil works | — | — | — | 48,810 | |
| — | 30.00 | — | — | ||
| Supply, erection, testing & commissioning of LED Post top 65 Watt with spun aluminium housingfor lamp and reflector assembly with clear polycarbonate cover and IP 65 protection. | — | — | — | 4,06,650 | |
| — | 30.00 | — | — | ||
| Supply, erection, testing & commissioning of Static white Flexible Outdoor type LED tube (Outdoor typeFlexible Neon LED tube, BENT) suitablefor applications of Facade Lighting.Flexible tube should be enabled withlow power LEDs. Luminaire luminousrange of minimum 25-30lm/W. Beamangles: 120. Power consumption shouldbe between 18W at steady state full intensity for 1m. Power factor of theluminaire shall be more than 0.90 andIP 67. Luminaire should be providedwith suitable separate non-integralpower supply unit, mounting channelsetc. The lumen maintenance L70@ 25°C of the LED shall not be less than70% of the initial lumen after 36,000 burning hours. Ingress Protectionshould be IP 67. | — | — | — | 2,41,710 | |
| — | 2.00 | — | — | ||
| Steel Almirah Book Case | — | — | — | 42,000 | |
| — | 10.00 | — | — | ||
| Foot Board / Step Pedestal | — | — | — | 23,000 | |
| — | 2.00 | — | — | ||
| Writing Table with 3 drawers one side and shelf on other side | — | — | — | 29,548 | |
| — | 3.00 | — | — | ||
| White board with colour marker & duster | — | — | — | 7,770 | |
| — | 30.00 | — | — | ||
| Supply at site fixing testing and commissioning of decorative wallmounting light 20 Watts made up of Polycarbonate diffuser with Graphitepowder coated die-cast aluminium alloyfitting suitable for outdoor use withhigh material resistant to discolorationworking on 220 V AC Supply, Colour ofLED : Cool white/Warm white,Luminaire is wired with inbuilt driverwith 5kV surge protection, Constantcurrent electronic driver havingoperating voltage range from 140-280Volt AC; provided with high voltage,open and short circuit protection dulyfixing in the wall and wiring by 3 C x1.0sq.mm PVC insulated & sheathedround flexible copper cable in anapproved manner as directed section Engineer in charge at site | — | — | — | 35,070 | |
| — | 30.00 | — | — | ||
| Supply at site fixing testing and commissioning of 5 Watts IP66Protected COB LED spike light to beoffered in Mono - Red (or)Green (or)Blue (or) Warm White Colour based onthe site condition. Should haveenvironmental friendly, compact, lightweight, energy saving The Spike lightshould be Offered Warm White Colour.Multi purpose application like columnlighting, tree up- lighting, statueaccentuation etc. can be and toughened glass Adjustable mountingbracket with spike is provided for easyfocus on the object , constant currentelectronic driver having operatingvoltage range from 140-280 Volt AC;provided with high voltage, open andshort circuit protection Luminaire iswired with inbuilt driver with 4.5kVsurge protection and wiring by 3 C x1.0 sq.mm PVC insulated & sheathedround flexible copper cable in anapproved manner as directed sectionEngineer in charge at site | — | — | — | 53,460 | |
| — | 3.00 | — | — | ||
| Computer table | — | — | — | 12,225 | |
| — | 200.00 | — | — | ||
| Supply and laying of 4c x 2.5 sq.mm XLPE insulated armoured copper cable | — | — | — | 19,800 | |
| — | 400.00 | — | — | ||
| Supply and laying of 4c x 1.5 sq.mm XLPE insulated armoured copper cable | — | — | — | 28,400 | |
| — | 100.00 | — | — | ||
| Supply and laying of 2c x 1.5 sq.mm PVC insulated flexible copper cable | — | — | — | 4,000 | |
| — | 20.00 | — | — | ||
| Supply and termination of Polyamide cable glands & copper lugs suitable for terminating 4c x 2.5sqmm XLPE insulated armoured copper cable | — | — | — | 1,520 | |
| — | 30.00 | — | — | ||
| Supply and termination of Polyamide cable glands & copper lugs suitable for terminating 4c x 1.5sqmm insulated armoured copper cable | — | — | — | 1,740 | |
| — | 20.00 | — | — | ||
| Supply and termination of Polyamide cable glands & copper lugs suitable for terminating 2c x 1.5sqmm PVC insulated flexible copper cable | — | — | — | 660 | |
| — | 30.00 | — | — | ||
| Supply and Installation of Junction Boxes, Pipes & flexible conduit of FRP JB (IP 65) Size:139x119x70 mm with stud type terminal suitable for terminating 4c x 2.5 sq.mm XLPE armouredcable | — | — | — | 17,550 | |
| — | 10.00 | — | — | ||
| Supply and Installation of Junction Boxes, Pipes & flexible conduit of FRP JB (IP 65) Size:260x210x116mmwith stud type terminal suitable for terminating 4c x 2.5 sq.mm armoured cable& housing 1 driver | — | — | — | 7,210 | |
| — | 1.00 | — | — | ||
| High Back Executive Chair | — | — | — | 20,495 | |
| — | 40.00 | — | — | ||
| Supply and Installation of Junction Boxes, Pipes & flexible conduit of 16 mm dia. PVC flexibleconduit (for 2c x 1.5 sq.mm PVC insulated flexible cable) | — | — | — | 1,480 | |
| — | 20.00 | — | — | ||
| Supply and Installation of Junction Boxes, Pipes & flexible conduit of PVC protection pipe - 40mmdia (ground floor cable) | — | — | — | 1,820 | |
| — | 20.00 | — | — | ||
| Supply and Installation of Junction Boxes, Pipes & flexible conduit of PVC protection pipe - 50mmdia (dropping of cable) | — | — | — | 2,600 | |
| — | 20.00 | — | — | ||
| Supply, erection, testing and commissioning of driver Type CLG-150-24 | — | — | — | 71,600 | |
| — | 50.00 | — | — | ||
| Supply, erection, testing and commissioning of DMX cable (single pair) | — | — | — | 8,500 | |
| — | 3.00 | — | — | ||
| Supply, erection, testing and commissioning of splitter (1 in 5 out) along with suitable enclosure. | — | — | — | 1,41,219 | |
| — | 30.00 | — | — | ||
| Supply, erection, testing and commissioning of Male female sets for connecting DMX cables of RGBfitting. | — | — | — | 14,940 | |
| — | 3.00 | — | — | ||
| Supply, erection, testing and commissioning of DMX Controller - DDNG485 (64 Adresses) withpower supply & fixture coupler with control panel. It should be compatible for Programmabilitywith PC, Mac, Tablet, Smart phone by using USB& Ethernet. DMX controller should have networkcontrollability feature to control the sceneremotely through LAN and triggered via UDP packets onport 2430. To be provided with IP 66 polycarbonate enclosure. (Warranty Period of 5years). Afterinstallation, assembling and commissioning contractor should ensure that all parts of the DMXcontroller are properly fixed and put it into running condition. The entire work should be carriedout as per the instructions of Site Engineer. Testing of the DMX controller to be done in thepresence of Site Engineer. | — | — | — | 4,68,261 | |
| — | 2.00 | — | — | ||
| Supply of silent Diesel Generator set of 160 KVA capacity complete with diesel engine, brushless alternator, auto mains failure (AMF) control panel, power cables, DG set fitted in acoustic enclosure and mounted on a base plate, and all other accessories, on turn key basis, DG set confirming to Central Pollution Control Board's latest guidelines of CPCB IV+ emission standards effective from 01/07/2023 or latest amended, with on-site maintenance & breakdown support during warrantee period of 02 years. | — | — | — | 37,73,006 | |
| — | 2.00 | — | — | ||
| Installation, testing and commissioning of silent Diesel Generator set of 160 KVA capacity complete with diesel engine, brushless alternator, auto mains failure (AMF) control panel, power cables, DG set fitted in acoustic enclosure and mounted on a base plate, and all other accessories, on turn key basis, DG set confirming to Central Pollution Control Board's latest guidelines of CPCB IV+ emission standards effective from 01/07/2023 or latest amended, with on- site maintenance & breakdown support during warrantee period of 02 years. | — | — | — | 4,19,222 | |
| — | 2.00 | — | — | ||
| High Back Executive Chair | — | — | — | 32,296 | |
| — | 2.00 | — | — | ||
| Supply of silent Diesel Generator set of 125 KVA capacity complete with diesel engine, brushless alternator, auto mains failure (AMF) control panel, power cables, DG set fitted in acoustic enclosure and mounted on a base plate, and all other accessories, on turn key basis, DG set confirming to Central Pollution Control Board's latest guidelines of CPCB IV+ emission standards effective from 01/07/2023 or latest amended, with on-site maintenance & breakdown support during warrantee period of 02 years. | — | — | — | 31,52,254 | |
| — | 2.00 | — | — | ||
| Installation, testing and commissioning of silent Diesel Generator set of 125 KVA capacity complete with diesel engine, brushless alternator, auto mains failure (AMF) control panel, power cables, DG set fitted in acoustic enclosure and mounted on a base plate, and all other accessories, on turn key basis, DG set confirming to Central Pollution Control Board's latest guidelines of CPCB IV+ emission standards effective from 01/07/2023 or latest amended, with on- site maintenance & breakdown support during warrantee period of 02 years. | — | — | — | 3,50,250 | |
| — | 3.00 | — | — | ||
| Supply of silent Diesel Generator set of 62.5 KVA capacity complete with diesel engine with minimum 83 BHP, brushless alternator, auto mains failure (AMF) control panel, power cables, DG set fitted in acoustic enclosure and mounted on a base plate, and all other accessories, on turn key basis, DG set confirming to Central Pollution Control Board's latest guidelines of CPCB IV+ emission standards effective from 01/07/2023 or latest amended, with on-site maintenance & breakdown support during warrantee period of 02 years. | — | — | — | 25,92,000 | |
| — | 3.00 | — | — | ||
| Installation, testing and commissioning of silent Diesel Generator set of 62.5 KVA capacity complete with diesel engine with minimum 83 BHP, brushless alternator, auto mains failure (AMF) control panel, power cables, DG set fitted in acoustic enclosure and mounted on a base plate, and all other accessories, on turn key basis, DG set confirming to Central Pollution Control Board's latest guidelines of CPCB IV+ emission standards effective from 01/07/2023 or latest amended, with on-site maintenance & breakdown support during warrantee period of 02 years. | — | — | — | 2,88,000 | |
| — | 3.00 | — | — | ||
| Design, Supply of 5KVA ON Line UPS as per latsest RDSO Specification RDSO/PE/SPEC/PS/ 0023-2001 (Rev. 0), Amendment no. 3 dtd.16.09.2011 (or latest). | — | — | — | 6,33,513 | |
| — | 3.00 | — | — | ||
| Erection, Testing and commisioning of 5KVA ON Line UPS as per latsest RDSO Specification RDSO/PE/SPEC/PS/ 0023-2001 (Rev. 0), Amendment no. 3 dtd.16.09.2011 (or latest). | — | — | — | 63,285 | |
| — | 14.00 | — | — | ||
| Mid back revolving chair for conference room | — | — | — | 1,83,708 | |
| — | 3.00 | — | — | ||
| Computer with preloaded licensed essential software including necessary interfacing equipment for diagnostics | — | — | — | 4,31,946 | |
| — | 4.00 | — | — | ||
| Design, Supply of 2KVA UPS as per latsest RDSO Specification RDSO/PE/SPEC/PS/ 0023-2001 (Rev. 0), Amendment no. 3 dtd.16.09.2011 (or latest). | — | — | — | 3,63,760 | |
| — | 4.00 | — | — | ||
| Erection, testing & commissioning of 2KVA UPS as per latsest RDSO Specification RDSO/PE/SPEC/PS/ 0023-2001 (Rev. 0), Amendment no. 3 dtd.16.09.2011 (or latest). | — | — | — | 36,376 | |
| — | 40.00 | — | — | ||
| Hiring of 100 KVA, 415V Three Phase DG sets including Fuel, Oil, transportation, power Cable, 3 phase MCB Distribution Boards, Socket boards, with D.G operator. The DG set shall be utilized for 12 hrs per day. The DG sets shall include 50 mtrs of 4 Core, 16 sq.mm CU cable. | — | — | — | 6,74,960 | |
| — | 150.00 | — | — | ||
| Hiring of 62.5 KVA, 415V Three Phase DG sets including Fuel, Oil, transportation, power Cable, 3 phase MCB Distribution Boards, Socket boards, with D.G operator. The DG set shall be utilized for 12 hrs per day. The DG sets shall include 50 mtrs of 4 Core, 16 sq.mm CU cable. | — | — | — | 20,93,100 | |
| — | 35.00 | — | — | ||
| Hiring of Supervisor for lighting arrangements at location. (1 man / shift) | — | — | — | 37,275 | |
| — | 35.00 | — | — | ||
| Hiring charges of 2 kVA 230 V single Phase DG set including fuel,oil, cable, DBs, socket boards,operator and maintenance.The DG set shall be utilized for 12 hrs per day | — | — | — | 20,405 | |
| — | 4.00 | — | — | ||
| Cupboard / Storwel | — | — | — | 1,08,560 | |
| — | 120.00 | — | — | ||
| Hiring & Provision of Switch boards with 6 Nos. of plug sockets including necessary accessories like incoming power supply points etc. | — | — | — | 3,240 | |
| — | 120.00 | — | — | ||
| Hiring & Provision of High speed Pedastal fans of above 1400 rpm with 450 mm sweep including all necessary accessories, power supply arrangements etc. wherever required as per instructions of site engineer | — | — | — | 16,560 | |
| — | 60.00 | — | — | ||
| Hiring of skilled manpower for lighting arrangements at location (2 man / shift) | — | — | — | 58,860 | |
| — | 1400.00 | — | — | ||
| Hiring of 200W IP 65 LED light fittings complete with fixing, connection arrangement, dismantling and transportation. The light fittings shall include suitable fixing and connection arrangements in the existing structure / poles with suitable size copper wires considering all the safety measures as per site condition and requirement. Along with metal tripod extendable as per site conditions required. | — | — | — | 6,35,600 | |
| — | 80.00 | — | — | ||
| Hiring of 50 mtrs of 4 core, 16 sq.mm, armoured, CU / AL cable, including transportation, laying, connection and disconnection. | — | — | — | 36,320 | |
| — | 90.00 | — | — | ||
| Hiring of unskilled manpower for lighting arrangements at location (3 man / shift) | — | — | — | 72,450 | |
| — | 120.00 | — | — | ||
| Provision of temporary lights and fans round the clock in gumties on hiring basis. (The cost for 01 gumti/day is Rs. 274/-). | — | — | — | 32,880 | |
| — | 5000.00 | — | — | ||
| Hiring of 4 core, 25 sq.mm armoured, AL conductor cable. | — | — | — | 2,55,000 | |
| — | 1.00 | — | — | ||
| Conference Table | — | — | — | 1,26,890 | |
| — | 30.00 | — | — | ||
| Hiring & Provision of water proof shamianas (Tent) of size 24'x12' including transportation & accessories etc. wherever requiredas per instructions of site engineer | — | — | — | 37,080 | |
| — | 450.00 | — | — | ||
| Hiring & Provision of plastic chairs including transportations etc. wherever required as per instructions of site engineer | — | — | — | 4,500 | |
| — | 4.00 | — | — | ||
| Dismantling / cutting, loading, transporting to Hazibunder (Scrap Depot) of Towers, Poles, MS Structures (scrapped steel) or handing over to open line. | — | — | — | 41,692 | |
| — | 1000.00 | — | — | ||
| Removal of OH line conductors (in meters - 1No. of conductor) | — | — | — | 5,000 | |
| — | 2000.00 | — | — | ||
| Dismantling the existing cables of all types & size up to 10 sq mm. | — | — | — | 40,000 | |
| — | 4000.00 | — | — | ||
| Dismantling the existing cables of all types & size above 10 sq mm up to 50 sq.mm. | — | — | — | 1,20,000 | |
| — | 10000.00 | — | — | ||
| Dismantling the existing cables of all types & size above 50 sq mm. | — | — | — | 4,00,000 | |
| — | 4.00 | — | — | ||
| Dismantling of existing transformer and transporting to Scrap depot / Handing over to Open Line Depot along with all accesories. | — | — | — | 8,996 | |
| — | 8.00 | — | — | ||
| Sliding Door Steel Shelving Cabinet | — | — | — | 2,82,160 | |
| — | 4.00 | — | — | ||
| Shifting of existing High Mast complete with luminaires, including disconnection and dismantling of the existing 25-metre-long mast, transportation to the new location, casting of foundation, re-erection, testing, and commissioning of the same with all required accessories as per site requirements. In case of any damage to the High Mast during shifting, the same shall be repaired and restored to original condition by the contractor at no extra cost, complete in all respects. | — | — | — | 6,19,488 | |
| — | 10.00 | — | — | ||
| Dismantling, Disconnecting, Removal of existing LT Boards and Transportation, Erection, Testing & Commissioning of the same with required cable gland & lugs as per site requirement. | — | — | — | 1,49,600 | |
| — | 10.00 | — | — | ||
| Dismantling, Disconnecting of existing LT / HT Feeder Pillar, LT / HT Panel and Transportation, Erection, Testing & Commissioning of the same with required cable gland & lugs as per site requirement. | — | — | — | 2,75,000 | |
| — | 2.00 | — | — | ||
| Shifting of existing escalator including dismantling, handling, packing, transportation, re-erection, hoisting, alignment, testing & commissioning with all accessories, complete in all respects as per site condition and railway requirements. | — | — | — | 45,19,400 | |
| — | 4.00 | — | — | ||
| Supply portion of Replacements of existing car door by new automatic operating AC VVVF Controlled Automatic Center / Telescopic opening Doors made of stainless steel hair line finish panels, 1.2 mm thick, SS 304 grade, having clear opening as per site requirement, sills etc. | — | — | — | 3,84,460 | |
| — | 4.00 | — | — | ||
| Erection portion of Replacements of existing car door by new automatic operating AC VVVF Controlled Automatic Center / Telescopic opening Doors made of stainless steel hair line finish panels, 1.2 mm thick, SS 304 grade, having clear opening as per site requirement, sills etc | — | — | — | 42,716 | |
| — | 4.00 | — | — | ||
| Supply portion of Replacements of existing landing door by new automatic operating Automatic Center / Telescopic opening Doors made of stainless steel hair line finish panels, 1.2 mm thick, SS 304 grade, clear opening as per site requirement including mechanism, panels, sills, door frames, frame fixing bracket, full height fascia plate etc. | — | — | — | 1,13,916 | |
| — | 4.00 | — | — | ||
| Erection portion of Replacements of existing landing door by new automatic operating Automatic Center / Telescopic opening Doors made of stainless steel hair line finish panels, 1.2 mm thick, SS 304 grade, clear opening as per site requirement including mechanism, panels, sills, door frames, frame fixing bracket, full height fascia plate etc. | — | — | — | 12,656 | |
| — | 10000.00 | — | — | ||
| Supply of feed wire single core 10 sqmm, PVC insulated ,PVC sheathed, copper conductor, multistrand with colour code along with 8 SWG earth wire & duly painted MS bracket with reel and shackle insulators in shed for feed wire. | — | — | — | 11,80,000 | |
| — | 10000.00 | — | — | ||
| Erection of feed wire single core 10 sqmm, PVC insulated ,PVC sheathed, copper conductor, multistrand with colour code along with 8 SWG earth wire & duly painted MS bracket with reel and shackle insulators in shed for feed wire. | — | — | — | 50,000 | |
| — | 200.00 | — | — | ||
| Supply of point wiring for light fittings on FOB & staircase and PF from feed wire | — | — | — | 39,800 | |
| — | 200.00 | — | — | ||
| Erection testing & commissioning of point wiring for light fittings on FOB & staircase and PF from feed wire | — | — | — | 2,200 | |
| — | 120.00 | — | — | ||
| Supply of 24" heavy duty BLDC air circulator wall mounting fan with all necessary fixing connection as per site requirements. | — | — | — | 16,17,240 | |
| — | 120.00 | — | — | ||
| Erection, testing and commissioning of 24" heavy duty BLDC air circulator wall mounting fan with all necessary fixing connection as per site requirements. | — | — | — | 1,61,640 | |
| — | 10.00 | — | — | ||
| Supply of Fly Killer unit complete with Ultra violet tube and mounting arrangement. | — | — | — | 55,550 | |
| — | 10.00 | — | — | ||
| Erection, testing & commissioning of Fly Killer unit complete with Ultra violet tube and mounting arrangement. | — | — | — | 2,780 | |
| — | 10.00 | — | — | ||
| Supply of Aquaguard NXT 6L RO+UV+UF Water Purifier 6-Stage Purification suitable for all Borwell, Tanker ,Municipality water Warranty Period: 30 month(s) from the date of commissioning. | — | — | — | 1,46,030 | |
| — | 10.00 | — | — | ||
| Installation, commissioning of Aquaguard NXT 6L RO+UV+UF Water Purifier 6-Stage Purification suitable for all Borwell, Tanker ,Municipality water Warranty Period: 30 month(s) from the date of commissioning. | — | — | — | 16,230 | |
| — | 4.00 | — | — | ||
| Modular Work Stations with Four Seater Cluster | — | — | — | 1,84,400 | |
| — | 8.00 | — | — | ||
| Modular Work Stations with Two Seater Cluster | — | — | — | 4,51,032 | |
| — | 4.00 | — | — | ||
| Modular Work Stations with Single Seater Cluster | — | — | — | 1,55,000 | |
| — | 1000.00 | — | — | ||
| Supply of all material, multiple loading/ unloading, storing, handling of 40A ( 4+2) conductors, 3phase, 4 wire bus duct trucking system with Centre / end feed unit with MCB, straight lengths 3 mtrs with 3 outlets, end covers, connectors, ceiling bracket holder, suspension clamp, nut, bolts, wall bracket, suspension hook, snap clamp etc. All suspension accessories shall be either Galvanized or powder coated. | — | — | — | 28,35,000 | |
| — | 1000.00 | — | — | ||
| Erection of all material, testing & commissioning of 40A ( 4+2) conductors, 3phase, 4 wire bus duct trucking system with Centre / end feed unit with MCB, straight lengths 3 mtrs with 3 outlets, end covers, connectors, ceiling bracket holder, suspension clamp, nut, bolts, wall bracket, suspension hook, snap clamp etc. All suspension accessories shall be either Galvanized or powder coated. | — | — | — | 3,15,000 | |
| — | 300.00 | — | — | ||
| Supply of all material, multiple loading/ unloading, storing, handling from Junction box/ Plug in Box/ Tap off box of bus trunking system to Light/Fan points with 3core X 1.0 sq.mm FRLS PVC insulated wire in surface PVC conduit / flexible conduit with joints bends as required to complete the wiring including all material required for fixing arrangement. | — | — | — | 1,56,600 | |
| — | 300.00 | — | — | ||
| Installation of all material, testing & commissioning from Junction box/ Plug in Box/ Tap off box of bus trunking system to Light/Fan points with 3core X 1.0 sq.mm FRLS PVC insulated wire in surface PVC conduit / flexible conduit with joints bends as required to complete the wiring including all material required for fixing arrangement. | — | — | — | 17,400 | |
| — | 60.00 | — | — | ||
| Supply, multiple loading/ unloading, storing of flexible bend for 40A ( 4+2) conductors, 3phase 4 wire bus duct trucking system. The prices shall also be inclusive all necessary components for connectiong two bus trunking standard length | — | — | — | 5,67,060 | |
| — | 60.00 | — | — | ||
| Erection, making, fixing, installation, testing and commissioning of flexible bend for 40A ( 4+2) conductors, 3phase 4 wire bus duct trucking system. The prices shall also be inclusive all necessary components for connectiong two bus trunking standard length | — | — | — | 63,000 | |
| — | 1500.00 | — | — | ||
| Supplying of 2X18 W LED fitting with IP66 complete with connections as per site requirement. | — | — | — | 21,30,000 | |
| — | 1500.00 | — | — | ||
| Erecting testing and commissioning of 2X18 W LED fitting with IP66 complete with connections as per site requirement. | — | — | — | 78,000 | |
| — | 30.00 | — | — | ||
| Supply of 45 W LED flood light, Ingress protection IP 66, High Power LED, pressure D- cast aluminum/Extruded aluminum housing , power coated / anodized, high efficiency toughened lamp cover, secondary lens optics complete as per specification | — | — | — | 63,540 | |
| — | 30.00 | — | — | ||
| Erection of 45 W LED flood light, Ingress protection IP 66, High Power LED, pressureD- cast aluminum/Extruded aluminum housing , power coated / anodized ,high efficiencytoughened lamp cover, secondary lens optics complete as per specification | — | — | — | 3,180 | |
| — | 30.00 | — | — | ||
| Fabrication, supply of CRCA Box of required size with 16 A Kitkat fuse-1no., 10A SPMCB -1no., 63A, 5 pin type industrial socket with plug, 63A TPN MCB -1no. and provision for fixing 2 or 3, 50/60 W LED flood light fittings as per specification | — | — | — | 1,72,110 | |
| — | 30.00 | — | — | ||
| Erection, testing and commissioning of CRCA Box of required size with 16 A Kitkat fuse-1no., 10A SPMCB -1no., 63A, 5 pin type industrial socket with plug, 63A TPN MCB -1no. and provision for fixing 2 or 3, 50/60 W LED flood light fittings as per specification | — | — | — | 24,000 | |
| — | 30.00 | — | — | ||
| Supplying Industrial Metal clad plug and socket 32A, 2P + E,230 V AC with MCB C Curve of rating 32 A , DP, 230 V AC complete with sheet enclosure | — | — | — | 53,520 | |
| — | 30.00 | — | — | ||
| Erecting Industrial Metal clad plug and socket 32A, 2P + E,230 V AC with MCB C Curve of rating 32 A , DP, 230 V AC complete with sheet enclosure | — | — | — | 2,670 | |
| — | 60.00 | — | — | ||
| Supply, fabrication, erection of GI items (GI pole, Channel, angle, flat, clamps, nut- bots, fan hook, fastener, street light bracket, GI wire Etc.) | — | — | — | 7,680 | |
| — | 200.00 | — | — | ||
| Supply of outdoor lighting 16W LED Pit light IP- 67 with fixing arrangement, with necessary hardware and connection from ceiling rose through 1.0 sqmm 3 core copper cable | — | — | — | 4,22,400 | |
| — | 200.00 | — | — | ||
| Erection, testing and commissioing of outdoor lighting 16W LED Pit light IP- 67 with fixing arrangement, with necessary hardware and connection from ceiling rose through 1.0 sqmm 3 core copper cable | — | — | — | 15,800 | |
| — | 4.00 | — | — | ||
| Design & supply of O/D type 10 KVA capacity outdoor type heavy duty single phase, 50 Hz, 230 V input, 110V output transformer complete with CRCA sheetenclosure with both side cable entry & 32A DP MCB for incoming & 2x63A DPMCB for outgoing. The enclosure shallbe duly painted. | — | — | — | 51,464 | |
| — | 4.00 | — | — | ||
| Erection, testing & commissioning of O/D type 10KVA capacity outdoor type heavy duty single phase, 50 Hz, 230 V input, 110V output transformer complete with CRCA sheet enclosure with both side cable entry & 32A DPMCB for incoming & 2x63A DP MCB for outgoing. The enclosure shall be duly painted. | — | — | — | 2,568 | |
| — | 10.00 | — | — | ||
| Supply - 100 / 63 A Tap off box with 4P, 36KA TM MCCB with overload , shot circuit protection for weilding application | — | — | — | 3,30,170 | |
| — | 10.00 | — | — | ||
| Erection - 100 / 63 A Tap off box with 4P, 36KA TM MCCB with overload , shot circuit protection for weilding application | — | — | — | 17,380 | |
| — | 50.00 | — | — | ||
| Supply of sheet steel enclosed 32 A MCB controlled 3 pin 32A 415 V plug socket with Top of Railway approved. | — | — | — | 97,950 | |
| — | 50.00 | — | — | ||
| Erection, testing and commissioning of sheet steel enclosed 32 A MCB controlled 3 pin 32A 415 V plug socket with Top of Railway approved. | — | — | — | 3,750 | |
| — | 10.00 | — | — | ||
| Supply of stainless steel body 240 Ltrs/hr capacity water purifier, with cooling capacity 150 ltr/hr storage cap 150 ltrs with foundations & wiring etc. as per ISS. | — | — | — | 7,42,980 | |
| — | 10.00 | — | — | ||
| Erection of stainless steel body 240 Ltrs/hr capacity water purifier, with cooling capacity 150 ltr/hr storage cap 150 ltrs with foundations & wiring etc. as per ISS. | — | — | — | 37,130 | |
| — | 15.00 | — | — | ||
| Supply of 10 Ltr. vertical type storage type geyser (ISI Mark) including all inlet & outlet, thermostatic control and thermal cut off with 3 core PVC flexible wire leads. | — | — | — | 89,310 | |
| — | 15.00 | — | — | ||
| Erection, connection & commissioning of 10 Ltr. vertical type storage type geyser (ISI Mark) including all inlet & outlet, thermostatic control and thermal cut off with 3 core PVC flexible wire leads. | — | — | — | 8,925 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .