Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹52.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹53.7 L+₹86,851.02 (1.64%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹53.7 L
EMD Value
₹54,000
Closing Date
3 May 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Additional Collector (Dev)
DRDA, Collectorate, Erode.
Improvements the 2 nos road in Package No. TN 12 - 56 of Bhavanisagar Block under MGSMT 75 percentage 2022-23
2023_RDTN_303727_7
Roc No.74399/TU1/2022, Dated 13.04.2023
Open Tender
Civil Works - Roads
Item Rate
180 days
Bhavanisagar Block
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹54,000
DRDA, Collectorate, Erode.
12 Jul 2023
19 Apr 2023
3 May 2023
19 Apr 2023
3 May 2023
26 Apr 2023
26 Apr 2023
Amount
Providing and laying including cost and conveyance of gravel from approved sources to work site including labour for spreading, watering and compacting by power roller to achieve the required Proctor density at 100% compaction at Optimum moisture content and hire fuel charges for powerroller, watersprinkler and all other incidental charges such as traffic barricading and providing dangerlights etc. comp for base-course and side berms.
Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material with a lift upto 3m and lead upto 1000m as per technical specification clause 301.4
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.
Providing and laying PRIMECOAT over WMB/ WMM surface at 7.00Kg of SS-1 Bitumen Emulsion / 10 sq.m Including cost of bituminous emulsion which will be supplied by the department at section stores and its cost will be recovered as per special condition appended including labour and for applying required quantity of bituminous emulsion by mechanical sprayer including hire and fuel charges for all tools and plants employed etc., complete as per clause 503 of MOST specification.
Providing and laying TACK COAT over Primed WMM surface at 2.5Kg of RS-1 Bitumen Emulsion / 10 sq.m. Including cost of bituminous emulsion which will be supplied by the department at section stores and its cost will be recovered as per special condition appended including labour charges for preparing the surface for laying tack coat and for applying required quantity of bituminous emulsion by mechanical sprayer including hire and fuel charges for all tools and plants employed etc., complete as per clause 503 of MOST specification.
Providing and laying bituminious concrete to 25mm thick using 0.13cum of 19.00-9.50mm. 0.17cum of 9.5-2.36 and below with 50.3 kgs of VG30/VG40 heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, carrying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross section and consolidated by 8-10 tonnes vibratory/ phenumatic roller to the required density etc., including labour for attending to paver to site etc. including hire charges and fuel charges foe 20-30t CMP with bitumen boiler, tipper trucks, paver finisher/9m paver finisher, vibratory/ phenumatic roller and all other tools and plants required, including fuel and all other incidental charges etc., completed as per specification using CMPas per clause 507 of MORTH Part-5
Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC : 8 fixing in position including painting and printing etc., as per drawing and Technical specification Clause 1703
KM stone
Providing and fixing of cautionary, mandatory and informatory sign board Providing and fixing of Retro Reflectorised Cautionary, Mandatory signs with definition plate made out of High Intensity Grade prismatic sheeting conforming to IRC-67:2010 & ASTM D 4
60 Cm Equilateral triangle (Cautionary) Sign Board
60 Cm Circular (Mandatory) Sign Board
Road Stud with lens reflector
Road marking with hot applied thermo plastic compound
Provision of 15 nos rumble strips covered with premix bitumenous carpet, 15-20mm high at centre, 250mm wide placed at 1m centre to centre at approved locations to control speed marked with white strips of road marking paint
Providing 1.00m Span RCC Cover slab culvert at Bell mouth and Ch 505m
Earth work excavation and depositing on bank with initial lead of 10m and lift and 2m in hard stiff clay, stiff black cotton hard red earth shales murram gravel stoney earth and earth mixed with small size boulder and in hard gravelly soils per SS 20B including all other incidental charges such as slurring strutting baling out water forming protective bunds etc., completed for foundation 1st depth
Abutment
Cement concrete 1:4:8 mix using 40mm I SS size hard granite broken metal from approved quarry including cost and conveyance of all materials to site including cost of cement which will be supplied departmentally at the departmental section stores and the cost will be recovered at the rates noted in the special conditions appended and conveyance of the same from Departmental section stores to the actual workspot and handiling charges at each and including cost of form work mixing concrete laying compacting and watering curing concrete including all leads for good soft, potable water hire and fuel charges for all tools and plants and all other incidental charges such as baling out water forming protective bunds providing coffer dams etc., completed as directed by the engineer
Abutment
Cement concrete 1:3:6 mix using 40mm I SS size hard granite broken metal from approved quarry including cost and conveyance of all materials to site including cost of cement which will be supplied departmentally at the departmental section stores and the cost will be recovered at the rates noted in the special conditions appended and conveyance of the same from Departmental section stores to the actual workspot and handiling charges at each and including cost of form work mixing concrete laying compacting and watering curing concrete including all leads for good soft, potable water hire and fuel charges for all tools and plants and all other incidental charges such as baling out water forming protective bunds providing coffer dams etc., completed as directed by the engineer
Abutment
Supplying and erecting centering are strutting including necessary supportss for place surface for RC Column fottings and pedestal beems crtitical pears etc., using mild steel angles of sizes 90x60x10cm gauge stiffness welded mild steel angles of sizes 25x25x3mm for boaring laying over silver oak joist of singles 10cm -6.5cm space of 75cm centre to centre completed complying with standard specification
Abutment
Supplying and fabricating and placing inposition mild steel or ribbed Tor steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floor etc., completed complying with standard specification (MS roads or RTS bars will be supplied departmentally at section stores and cost will be recovered at issue rate) The binding wire will be supplie by the contractor as per clause MOST specification
Cement concrete 1:2:4 mix using 20mm I SS size hard granite broken metal from approved quarry including cost and conveyance of all materials to site including cost of cement which will be supplied departmentally at the departmental section stores and the cost will be recovered at the rates noted in the special conditions appended and conveyance of the same from Departmental section stores to the actual workspot and handiling charges at each and including cost of form work mixing concrete laying compacting and watering curing concrete including all leads for good soft, potable water hire and fuel charges for all tools and plants and all other incidental charges such as baling out water forming protective bunds providing coffer dams etc., completed as directed by the engineer
Reinforced Cement Concrete 1:1/2:3 mix using 20mm I SS size hard granite broken metal from approved quarry including cost and conveyance of all materials to site including cost of cement which will be supplied departmentally at the departmental section stores and the cost will be recovered at the rates noted in the special conditions appended and conveyance of the same from Departmental section stores to the actual workspot and handiling charges at each and including cost of form work mixing concrete laying compacting and watering curing concrete including all leads for good soft, potable water hire and fuel charges for all tools and plants and all other incidental charges such as baling out water forming protective bunds providing coffer dams etc., completed as directed by the engineer
Construction of Drainage at Ch 0/0-0/050
Earth work excavation and depositing on bank with initial lead of 10m and lift and 2m in hard stiff clay, stiff black cotton hard red earth shales murram gravel stoney earth and earth mixed with small size boulder and in hard gravelly soils per SS 20B inc
Cement concrete 1:4:8 mix using 40mm I SS size hard granite broken metal from approved quarry including cost and conveyance of all materials to site including cost of cement which will be supplied departmentally at the departmental section stores and the
Supplying and erection centering shuttering including necessary supports for plane surface in foundation including cost and sonveyance of all materials to site and all labour charges etc., Completed
Cement concrete 1:3:6 mix using 20mm I SS size hard granite broken metal from approved quarry including cost and conveyance of all materials to site including cost of cement which will be supplied departmentally at the departmental section stores and the
Plastering with CM 1:4 mix to 20mm thick including cost and conveyance and all labour charges etc., completed
Provision for Hardbed from Ch 0/0 - 0/050
Earth work excavation and depositing on bank with initial lead of 10m and lift and 2m in hard stiff clay, stiff black cotton hard red earth shales murram gravel stoney earth and earth mixed with small size boulder and in hard gravelly soils per SS 20B inc
Supplying and erection centering shuttering including necessary supports for plane surface in foundation including cost and sonveyance of all materials to site and all labour charges etc., Completed
Providing and laying spreading and compacting graded stone aggregate to WET Mix Macadam (WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in Subbase/ Base course on well prepared surface and compacting with vbibratory roller to achieve the sesired density including cost of materials labour charges rentals etc., completed
Construction of Granual sub base by providing well graded material (25mm to 4.75mm IRC HBG @ 65%, 4.75 to 2.36mm IRC HGB metal @ 20% & 2.36 mm below IRC HNG metal @15%) & (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor graded on prepared surface mixing by mix in place methode with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requiremnets of the specification and thickness as per approved plans or as directed by the engineer ( Mix -in-place methode). Hard bed
Construction of un-reinforced dowel jointed at expansion and construiction joint only, plain cement concrete pavement thickness as per design over a prepared sub base with 43 graded cement or any other tyope as per clause 1501.2.2 M30 (graded) coarse an hard bed
Name Board
Towards the charges for routline maintenance
For the First Year from the date of completion of work
For the Second Year from the date of completion of work
For the Third Year from the date of completion of work
For the Fourth Year from the date of completion of work
For the Fifth Year from the date of completion of work
Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. In Area of Thorny Jungle Km.0/000-1/4
Earth work excavation and depositing on bank with initial lead of 10m and lift and 2m in hard stiff clay, stiff black cotton hard red earth shales murram gravel stoney earth and earth mixed with small size boulder and in hard gravelly soils per SS 20B inc
Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material with a lift upto 3m and lead upto 1000m as per technical specification clause 301.4
Providing and laying including cost and conveyance of gravel from approved sources to work site including labour for spreading, watering and compacting by power roller to achieve the required Proctor density at 100% compaction at Optimum moisture content
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406.
Providing and laying PRIMECOAT over WMB/ WMM surface at 7.00Kg of SS-1 Bitumen Emulsion / 10 sq.m Including cost of bituminous emulsion which will be supplied by the department at section stores and its cost will be recovered as per special condition appended including labour and for applying required quantity of bituminous emulsion by mechanical sprayer including hire and fuel charges for all tools and plants employed etc., complete as per clause 503 of MOST specification.
Providing and laying TACK COAT over Primed WMM surface at 2.5Kg of RS-1 Bitumen Emulsion / 10 sq.m. Including cost of bituminous emulsion which will be supplied by the department at section stores and its cost will be recovered as per special condition appended including labour charges for preparing the surface for laying tack coat and for applying required quantity of bituminous emulsion by mechanical sprayer including hire and fuel charges for all tools and plants employed etc., complete as per clause 503 of MOST specification.
Applying tack coat over BT Surface (not treated with primer) using 3kg of bituminous emulsion per 10 sqm including cost of bituminous emulsion which will be supplied departmentally at section stores and cost of which will be recuvered at the rates as per special conditions appended herewith including conveyance of bituminous rmulsion to actual work spot handling charges including labour charges for brushing cleaning and preparing the surface for laying the tack coat and labour and machinery charges for applying the requaring quantity of bituminous emulsion including hire fuel and running charges for all tools and plants employed for the work including all otheres incudental charges such as barricading and providing danger flags etc., completed as per standard specification
Providing and laying open graded premix carpet of 20mm compacted thick using 0.18cum of 13.20mm IRC size HBG machine crushed chips and 0.09 cum of 11.20mm IRC HBG machine crushed chips with 13.432Kg of bitumen and 1.168 Kg of Plastic waste for 10 Sqm. of premix carpet including laying of seal coat A over the premix carpet of using 0.09 cun if 6.70mm IRC size HBG machine crushed chips with 9.80 Jg if bitumen per 10sqm. including cost and conveyance of chips and stacking them to department gauge for pre-measurement including cost of bitumen hich will be supplied by the department at department section stores and its cost will be recovered as per special condition appended including heating the bitumen and metal mixing the materials in mini hot mix plant for premix carpet including spreading the same and finishing all labour charges application of bitumen for seal coat over the premix carpet and spreading the seal coat and power roller rolling separately as per MOST specification 509 and 513 (II revision ) including all labour charges hire and fuel charges for mini hot mix plant power roller
Reniforced cement concrete M15 grade kilometre stone/ local stone of standard design as per IRC :8 fixing in position including painting and priting etc, as per drawing and Technical specification clause 1703
HM stone
KM Stone
Providing and fixing of cautionary, mandatory and informatory sign board Providing and fixing of Retro Reflectorised Cautionary, Mandatory signs with definition plate made out of High Intensity Grade prismatic sheeting conforming to IRC-67:2010 & ASTM D 4956-09, Type IV specification and Fixed over 1.50mm thick Aluminium sheet Fixed on back support frame of 25mm x 25mm x 3mm Mild steel angle and supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm below Ground level etc Complete including 7 years warranty for the Retro Reflective sheeting as per clause 6.90 of IRC 67-2010
60 Cm Equilateral triangle (Cautionary) Sign Board
60 Cm Circular (Mandatory) Sign Board
Road Stud with lens reflector
Road marking with hot applied thermo plastic compound
Provision of rumble strips covered with premix bituminous carpet 15-20mm high at centre 250mm wide placed at 1m centre to centre at approved locations to control speed, marked with white strips of road marking paint
Provision for Name board ( CIB, Maintenance Board & name Board)
Towards the charges for routline maintenance of the road work executed under PMGSY including dressing of berms by refilling the gully with the earth from borrow pits, cleaning of wild seasonal growth on berms, destilting of side drains and CD works, white washing guard stones, painting of KM, HM stones, parapets, cutting of branches of trees, refixing displaced guard stones, caution boards, speed limit boards etc., with the periodicity for the above activities as prescribed in IRCSP- 20:2002 and as directed by the departmental officers except for the constructional defects which has to be rectified by the contractor at his own cost
For the First Year from the date of completion of work
For the Second Year from the date of completion of work
For the Third Year from the date of completion of work
For the Fourth Year from the date of completion of work
For the Fifth Year from the date of completion of work
GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)
A K N CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .