CA NO GE/ND72/202122 ADDITION/ ALTERATION TO CORRIDORS OF SOUTH HUTMENT AT HQ IDS AND PROVISION OF ROAD MARKING PAINT, ROAD BLOCKAGE AND DRAIN COVER AT HQ IDS PARKING UNDER GE NEW DELHI

Amount

Demolition of cement concrete in ground floor and pavings n.exc 15 cm in thickness below or above ground level & removing the rubbish out of MoD land complete all as specified and as directed.

M&L for machine cut kota stone flooring 18-20 mm thick laid over and including 20 mm thick screed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror type wax polish complete all as specified and as directed.

M&L for machine cut Makrana white marble tiles flooring 20mm thick laid over and including 20 mm thick screed in CM 1:4 and jointed and pointed with white cement slurry including cutting and polishing type with mirror type wax polish complete all as specified and as directed.

M&L for Cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) 25m thick as in sub-base floor, finishing surfaces of concrete topping even and rough to receive the floor topping complete all as directed.

M&L for GI powder coated micro perforated micro look false ceiling with fleece lay- in- type 0.50mm thick, suitable for grid/frame module of 600mmx600mm size complete with GI powder coated grid consisting of silhonthe main T runner 15mm suspended at 1200mm centre to centre and cross T runner of 15mm size suspended at 600mm centre to centre suspended by 4mm GI rod from roof slab including steel fastener wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600x600mm ceiling etc complete all as specified and as directed.

Demolition of brickwork or stone boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

Taking down chowkhats or frame (with shutters without taking off shutters) n.exc 1.50 sqm each complete all as specified and as directed.

M&L for brickwork with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in CM 1:6 with old size bricks complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and removing the rubbish outside of MoD land complete all as specified and as directed.

M&L for 600 X 600 X 10 mm thick vitrified tiles (double charge light shade) of premium quality in floors etc set and jointed in neat cement slurry and pointed in coloured cement over and including 20 mm thick screed bed in CM (1:6) or adhesive as per manufacturers instructions complete all as specified and as directed.

S&F coloured glazed ceramic tiles in vertical surfaces 450 X 350 X 7mm coloured tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick rendering in CM 1:4 complete all as specified and as directed.

Taking down cement plaster on brick wall surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specified and as directed.

M&L 15mm thick ready mix plaster on brickwork or concrete surfaces of wall in two layers (thickness of each layer not more than 10 mm) finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls surface using chalk whitening/putty and smoothening of the surfaces of walls, and applying two coats of oil bound distemper (of approved tint and shade) and applying 3 mm thick wall care putty for smooth surface complete all as specified and directed.

M&L for weather coat for external walls painting by Apex Ultima from Asian paints or Shield Max from Dulux weather proof or equivalent from approved list of makes using one coat for fair finish on old surfaces including preparation of old painted surfaces by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots complete all as specified and as directed.

M&L for preparation of undecorated brick/concrete plasterd/un-plastered or newly plastered surfaces of walls, Pillars, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots and applying two coat weather caot for external walls painting by Apex Ultima from Asian paints or Shield Max from Dulux weather proof over a coat of solvent based primer complete including applying wall care putty for smooth finish

Taking down chowkhats or frame (with shutters without taking off shutters) exc 1.50 but not not e.exc 4.00sqm each complete all as specified and as directed.

S&F powder coated aluminium sliding window shutters with frames (consisting of 02 Nos grazed shutters and 01 No gauge shutter) series D(25mm), 3 track sliding shutters, duly fitted with neoprene beading glass 5.5mm nominal thickness in gazed shutters, stainless steel wire mess of 0.254 mm nominal dia of wire and 0.95mm average width of aperture in gauzed shutter, 5.0mm thick prelam PVC Sheet fixed with standard aluminium beading in arch portion and powder coated ornamental aluminium grill 10mm dia, 75 x 97 mm aerature fixed with standard aluminium beading fixed in outer portion of the chowkhat etc complete all as specified and as directed.

S&F powder coated aluminium door using 96.6mm X 44.8 mm X 1.6 mm aluminium chowkhats (double shutter type) 84.0 x44.7mmX1.6mm section vertical styles 101.60X44.88X1.6mm rails 1 door closer fixed, mortice lock vertical type mild steel 100mm size including aluminium powder coated builders hardware 02 Nos tower bolt 150mm, butt hinges as 100mm 3 Nos each shutter , sliding bolt 300 mm long 01 No, 2 door handles and fittings complete all as specified and directed by Engr-in-Charge bottom panel with 12 mm thick laminated Novapan and top panel with 5.5 mm thick plain glass fixed with snap beading rubber of suitable size and each shutter n.exc 0.95 mtr in width complete all as specified and as directed.

S&F powder coated aluminium partition n exc 1.20 sqm in each panel using 95.6mm x 44.8mm x 1.6mm frame work with 12mm thick exterior grade veneered particle boards with decorative veneers on both faces/5.50mm thick frosted glass as directed by Engr-in-charge including aluminium beading for fixing board complete all as specified and as directed.

S&F 100 mm wide Venetian blinds vertical type including guide rail, pulling thread etc incl taking down existing venetian blinds and existing pelmets complete all as specified and as directed.

M&L preparation of new or previously untreated surfaces of steel and iron surface of any description not otherwise described over 10 cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for 20mm thick granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for mirror finish to existing Kota stone flooring with grinding machine using different size of carbonidum stone and disposed off the wastage as directed by the Engr-in-Charge.

Taking down carefully old point wiring (Light / Fan/ Socket) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch ,socket,ceiling fittings,bulk head fittings,tube light fittings and regulators etc from existing concealed conduits/surface conduits and making good the disturbed surface of wall/ floor complete to match with the existing surface/finishes all as specified.

M&L for Point wiring with 1.5 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of same size as in phase/neutral and connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors and also incl suitable modular bottom sunk type proceed steel terminal box and suitable modular top cover with frame of suitable modules all as directed by Engr-in- charge for the following :- Note: Earth to be connected to common earth dolly

(a) One light/fan/bell point controlled by one, one way switch.

(b) One three pin socket outlet 5 Amp controlled by one, one way switch on same board

(c) One three pin socket outlet 5 Amp controlled by one, one way switch on independent board

M&L for Point wiring with 4.0 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of 4.0 sqmm connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors etc, and also incl suitable modular bottom sunk type procced steel terminal box and suitable modular top cover with frame of suitable modules all as directed by Engr-in- charge independent board. Note: Earth to be connected to common earth dolly

Supply and fix in replacement modular switch 6 Amps 1 module 230 Volts one way complete all as specified and as directed.

Supply and fix in replacement modular switch 1 way 16 Amps 1 module 230 Volts complete all as specified and as directed.

Supply and fix in replacement modular socket , 6 Amp 2/3 pin combined 230 Volts complete all as specified and as directed.

Supply and fix in replacement modular socket , 16 Amp 2/3 pin combined 230 Volts complete all as specified and as directed.

S&F in Supply and fixing LED luminaire 600 mm x 600 mm,(2'X2') 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. Make:- Havells Cat Part No LHEWEJP7PL1W034 or equivalent from approved list of makes

Taking down carefully old unserviceable submain wiring with aluminium/ copper conductor cable including fittings and accessories complete all as specified and as directed.

S&F sub main wiring with two runs PVC insulated unsheathed FRLS stranded copper conductor cable of size 4 Sqmm alongwith one run of PVC insulated unsheathed stranded copper conductor cable of size 2.5 sqmm as earth wire connected to earth dolly fixed on surface of wall/ceiling/in concealed conduits,including cutting chases and making good to walls, floors etc, complete all as specified and as directed. Note :- Two run of 4sqmm copper conductor cable,one run of 2.5 sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB with connection testing and commissioning., IS-8828 marked complete all as specified and as directed.

S&F in replacement MCB DBs single pole with neutral sheet metal enclosures double door type, 240 Volts, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete with out MCB and with enclosures blank plate for unused way suitable for 8 way. including cutting chases and making good to walls complete all as specified and as directed.

S&F in replacement MCB DBs single pole with neutral sheet metal enclosures double door type, 240 Volts, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete with out MCB and with enclosures blank plate for unused way suitable for 4 way. including cutting chases and making good to walls complete all as specified and as directed.

S&F in replacement MCB SPN 240 Volt of capacity 32 to 60 Amp rating, "B" Series complete all as specified and as directed.

S&F in replacement sheet metal enclosure 2-in-1 3 pin metalic socket and plug top with plug socket and MCB 20 Amp SP complete all as specified and as directed.

M&L for taking down existing AC window type or split type and Shifting /refixing the same at its original condition along with provision of wall mounted stand with complete accessories including minor repair, topup of requirement as any type of refrigerant and repair of PCB / display complete all as specified and as directed by Engr-in-Charge

Supply & fix copper tubing heavy duty inner dia 6 mm (1/4") for refrigerant for ACs complete all as specified and as directed. Make-Mandev/Mandley/ Uniflow

Supply & fix copper tubing heavy duty inner dia 13mm (1/2") for refrigerant for ACs complete all as specified and as directed. Make-Mandev/Mandley/ Uniflow

Supply & fix PVC insulated flexible copper conductor 3 core 1100V Grade of size 2.5 sqmm complete all as specified and as directed.

Supply & fix in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 12 way VTPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete and including cutting chases and making good to walls complete all as specified and as directed.

Supply fix in replacement of MCCB TPN 160 Amp, 36 kA micro processor energy released type with OLED display complete all as specified and as directed.

S&F PVC conduit pipe 20 mm dia for drain out condensing water for all accessories, fittings including chases cutting, making of hole in existing wall and good surface to distrubed surfaces of wall complete all as specified and as directed.

Supply and Fixing Copper cable 2.5 Sqmm 3 core with necessary bottle lugs and connecting complete all as specified and as directed.

Supply and fix CABLOFIL wire meshed Hot dip Galvanized cable tray 54mm (h) x 200 mm (w) complete with nuts bolts washers (GI) and all accessories for mounting and supporting the cable tray with cover system, along with vertical bends, bends.for mounting and supporting the cable tray system, along with vertical bends, bends. including taking down and re fixing any type of electric cable any size,if require through wall cutting and making to good surface in disturbed area all as directed by Engr-in- Charge.

M&L for 2mm thick road marking strips (retro refractive) of any approved color i.e white, yellow etc of width 100 to 150mm in straight or curved path using hot thermoplastic material by fully/semi automatic thermoplastic paint through applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater & profile shoe heater, driven by experienced operator on road surface including necessary T&P, cleaning the road surface from all dirt, seals, oil, grease and foreign materials, etc. complete all as specified and directed.

S&F centre verge divider Dark eye Model No DA 1011 or equivalent, with length 740mm width 250mm and 70mm height with detachable spring post Model No DA 954 of dark eye or equivalent, including drilling the hole and clean the drilling dust and filling the holes spread with the epoxy resin compound on the holes and under the centre verge fixing arrangement as per manufacturer's instructions etc complete all as specified and directed by Engr-in -charge. (Make Dark Eye or equivalent in TATA BP/3M)

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m depth for drain line , etc n.exc 10 sqm on plan etc and getting out in soft/loose soil and removing the excavated soil out of MOD Land complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-2 as in surfaces channel and drain incl necessary form work to concrete surfaces complete all as specified and as directed.

Forming fair finished surface channel /drain 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

M&L for providing cement concrete 1:2:4, type B-1, as in roof kerbs or mud stops, rounded or chamfered on edges, using crushed graded stone aggregate complete all as specified & directed including form work etc.

Cleaning of dirt material, debris, garbage from the drain and removing the same outside of MoD land complete all as specified and as directed.

Cutting into existing manholes for connecting new drains , making good to pipe and rendering , cutting out existing benching for forming branch channel (1/2 round or ¾ round) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as reqd

S&F precast perforated RCC 1:2:4 type B-1 drain covers slabs of variable size according to site condition, thickness with 3 mm thick flat iron around cover slab Polycrete incl reinforcement as per manufacturers design with frame complete and set in CM 1:4.

GLIBS CONSTRUCTION