15FC Tied grant Ist Ins Toilet work

Amount

Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrains, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification

Plain Cement concrete 1:4:8 mix using 40mm HBG metal for foundation and flooring including cost of all materials to site and all labour charges for mixing, laying and curing etc., complete as per standard specification

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand ) using new best II class Bricks of size 9 x 41/2 x 3 from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.

Plastering with cement mortal 1:5 mix using 12 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete as per stand specification.

Dadooing the walls with best approved quality colour glazed tiles of size 100 x 200 x 6mm set in CM 1:2 (One of cement and two of sand) 10mm thick and pointing with colour cement using 0.4kg per m2 neatly in all floors as directed etc., complete complying with standard specifications.

Floor finishing with Ceramic tilles of size 30cm x 30cm x 6mm over the base plastering cement mortar 1:3 mix, 20mm thick pointing with using white cement 4kg/10sq.mt. inculing cost and conveyance of all materials and all labour charges. Etc. complete

Supply and fixing in position 22" Indian type Colour water closet with foot reset includes "P" (or) "S" trap including cost and conveyance of all materials to site and all labour charges etc., to complete as per std.,specifications.

Painting two coats ready mixed Approved Exterior Emulsion of first quality and of approved colour over a primingcoat including through scarbing clan removel ofone coat of priming with best Cement paint as directed by the department officers etc complete and including necessary plaster of paris whever regd.(S.l.No.358) -10sqm complete. as per std., specifications.

Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standared specifications.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (UPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional tability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Painting two coats new iron work for grills, with two coat synthetic enamel paint and approved quality and colour including priming coat . The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc., complete complying with standard specifications.

Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wireconnection of 14 SWG wire for Light point/fan point (5 points per coil) [ SD No. 21 ]

Supply and fixing of 16 Amps DPIC switch of 500 V with fuse and neutral(side handle ) on suitable T.W.box with earth connection only.[SD no.136]

Supply and run of 2 of 1.5 sq.mm polythene insulated PVC sheathed heavy duty SC.Copper conductorof 1100 V grade on 7/20 GI bearer wire for service connection mains[SD NO. 62]

Supply and run of 2X1.5 sq.mm (22/0.3) polythene insulatedPVC sheathed heavy duty SC.Copper conductor of 1100 V grade in 25mm dia GI pipe(Clss B) suitably bent on both ends with necessary Angle iron upright and end supportes for Mains[SD NO. 67]

Supply and fixing of TNEB meter board suitable for 32A threephase service connection with 3Nos.32A fuse unit(500V)32A neutral link and earthlink(1"x1/8"copperflat) on TWplank of size 600mmx450mmx19mm with supporting TWreepers of 1"thick an either side with painting with suitable bolt and nuts for fixing the TWplank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit [SD NO. 127]

Supply and fixing of single box type 4'-40W flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of Tube Light [SD 88 ]

Supply and delivery and Fixing of HDPE tank 2000 Lts.Capacity As per Is 12701 / 1996 inculingloading , unloading , transportation cost and conveyance of all materials and all labour charges. etc., complete

Supply and filling with 40mm size brick jelly including cost and conveyance and all materials to site and all labour charges etc., complete.

Plastering with cement mortal 1:5 mix using 20 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete as per stand specification.

Supply and fixing in position best quality of approved make Wash hand basin of size 550 x 440 mm with all accessories such as cast iron brackets , icnluding cost of 15mmdia brass nipple , 15mm nylon connection etc., including fixing the wash basin in the wall in position with a pair of CI brackets with TW plug and screws and giving necessary water supply connection and painting the brackets with two coats of paint over priming coat of anticorrosive paint including testing leakages etc,m complete complying with standard specifications ( the wash hand basin and the speicials should be got approved by Executive Engineer before use on works)

SRI KUMARAN CONSTRUCTION