138WE/L-92/24-25

Amount

Dismantling chain link fencing/expanded metal or mesh not exceeding 4kg/Sqm fixed in steel, wood fillets, concrete post etc. of any description, complete all as specified and as directed

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts,etc.including provision of binding wire, complete all as specified and as directed

Supply only chain link MS galvanised fencing of size as directed by Engr-in-charge.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) incl removal of old unservicebale barbed wire, complete all as specified and as directed.

S&F mild steel screw bolt 5 to 10 mm dia (machine made) with hexagonal or square head at one end and screwed the other, screwed end to be fitted with one waher and hexagonal or square nut length exc 5cm but not exc 10 cm long, complete all as specified and as directed.

Mild steel round bars 10mm dia and over (for tie bar of chain link fencing), cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M & L for Excavating in post holes (or similar holes) each n.exc 0.5 cum in hard/dense soil , getting out, and removing excavated soil to a distance n.exc 50 m, complete all as specified and as directed.

M&L for PCC type C-2, (1:3:6) , using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete etc, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated semicorrugated etc) sheets in roof coverings complete all as specified and as directed.

S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275, complete all as specified and as directed.

All as per item No 11 above but except sheeting. complete all as specified and as directed.

S&F Pre painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified.

S&F 0.63mm thick plain galvanised mild steel sheeting as in ridges hi, valley gutters drip and straight flashings (length and girth as fixed) with L or J hooks or coach screws with grade of zinc coating 275 complete all as specified and as directed.

M&L for taking down carefully of existing steel gate of storage sheds and steel gate of any size by means of machinery and crane and fitted after repair i.e greasing, oiling , roller any type, pintal hinges and welding etc the same in same opening complete all as specified and as directed. Notes: 1. All T&P will be provided by contractor. 2. No electricity will be provided by MES contractor will arrange the DG Set for welding purpose.

S&F MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

S& F mild steel Hand rails, half round or other steel section or core for wooden hand rail straight portion , drilled and countersunk for balusters running bas for doors , balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed including all necessary drilling bolting or riveting etc and similar work conforming to Fe 290 Gd E 165, complete all as specified and as directed.

S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

M&L preparation of new or previously untreated steel surfaces exc. 10 cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Demolition of precast concrete block /stone walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block and setting in cement mortar 1:6 all as Specified.

All as per item no 21, but except blocks. complete all as specified and as directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15mm thick rendering on other than fair faces of brick works in two layers 10 mm & 5 mm thick using water proofing compound for outer layer of 5mm thick finished even and fair without using extra cement in cement mortar 1:4 complete all as specified and as directed.

Supply only integral liquid water proofing compound complete all as specified and directed. Make : Pidilite/Sika

M&L Preparation of plastered surface of new wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed.

Dismantlng wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton.(Framed work) complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section, complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed.

M&L for not less than 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

M&L for not less than 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in ceiling panelling, shelves/boarding complete all as specified and as directed.

M&L French polishing on wood or wood based surface of any width or girth or any description,including cleaning and preparing the surface including a coat of wood filler on new surface with two or more coats complete all as specified and as directed.

M&L in repair for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

M&L in repair for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in ceiling panelling, shelves/boarding complete all as specified and as directed.

Dismantling boarding / wooden flooring of any description ,fixed in any positon,complete all as specified and as directed.

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15cm thick below or above ground level and removing demolised material out of Military station, complete all as specified and as directed.

M & L 100mm thick plain cement concrete 1:2:4 type B-2 (using 40mm granded stone aggregated) as in hardstanding etc. finishing cement concrete surfaces even and fair without using extra cement complete all as specified and directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement, complete all as specified and as directed.

M&L Forming Contraction (Dummy) joints 50 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar, complete all as specifed and directed.

Demolition of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbes, aprons, etc laid dry of laid bedded and pointed in any mortar , complete all as specifed and directed.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings, etc, complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 80mm thickiness M-40 grade complete all as specified and as directed by Engr-in-Charge.

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge.

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 40 mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge.

M&L sand cushiong (25 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed by Engr-in-Charge.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc.

M&L for Chequred cement concrete tiles 20cm X 20cm X 25mm thick, set ,pointed & jointed in neat cement slurry in floors pointed with grey cement & pigments .Layed over and including 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.

Horizon Construction Company (BID ID -3199212)

Rampal Singh Contractor (BID ID -3198175)

M/S MUNEER HASSAN AKHON (BID ID -3198524)