8920/E8

Amount

Excavating in trenches n. exc. 1.5 m. wide and n. exc. 1.5 m. in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pire holes, etc. n. exc. 10 sqm on plan and not exc. 1.5 m. in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling including spreading levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated soil not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil complete all as specified and as directed.

M&L for sand cushioning for protection of cables (below, above and around the cable laid in trenches) complete using clean, dry sand complete all as specified and as directed.

Supply and laying un reinforced pre cast concrete cable cover , class HV, type - 2 flat size 450mm x 180mm x 40 mm complete all as specified and as directed.

M&L cement concrete 1:3:6 Type C1 (using 20 mm graded crushed stone aggregate) as in coping, roof kerb or similar work, rounded or chamfered on edges including necessary form work complete all as specified and directed.

S&F 80 mm dia steel water tube light grade galvanised with all fittings and fixed complete to trenches complete all as specified and as directed.

Taking out old unserviceable XLPE/HT/PVC armoured UG cables of any size including bricks or pre-cast concrete cable cover etc of any description from trenches / walls / poles by disconnecting the cable from pole /feeder /panel board etc. and keep serviceable bricks or pre-cast concrete cover, cable, pipe etc. in safe custody for re-use and unserviceable materials removing from site all as specified and as directed. Note : (i) Excavation and earth work shall be measured and paid separately.

Supply and laying in trenches or fixing or passing through pipes or fixed in trenches 11 KV HT(earthed) grade XLPE insulated armoured heavy duty electric cables (conforming to IS 7098 (Part- II) - 2011 with aluminium conductor of cross sectional area 120 Sqmm 3.0 core complete all as specified and as directed.

M & L Cable jointing kit for 11 KV (Earthed) grade cable for Out door terminations heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm incl cutting of old jointing material complete all as specified and as directed. (Make of Kit - M-seal / Denson / Raychem)

M & L Cable jointing kit for 11 KV (Earthed) grade cable for In door terminations heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm incl cutting of old jointing material complete all as specified and as directed. (Make of Kit - M-seal / Denson / Raychem)

M&L for road cutting for laying of LT UG cable / galvanised iron pipe complete all as specified and directed.

M & L for 190 mm dia cable route indicator made of CI plate 8 mm thick with spike to angle iron 25x25x5mm, 40 cm long marked as HT coplete including fixing and excavation in soft/loose/hard/dense soil, PVC embaded, block size 300x300x300 mm (1:3:6) type C-1 using 20 mm graded stone aggregate complete all as specified and as directed.

Ultimate Solution Company

TOTCO

INDIA ELECTRICAL EQUIPMENTS

JOTSHNA ELECTRICALS