SPECIAL REPAIR TO HANGER AND OTHER SANCTIONED WORKS AT NAMS.

Amount

M & L pre-painted Galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering , chajjas/walls, fitting & fixing, zinc coating including tapping screw and etc including dismantling of old sheets complete all as specified and direced.

M&Lcamouflaging painting incl preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described over a coat of red oxide and applying two coat of Fire proof synthetic enamel paint to provide camouflaging effect by obsecuring outline splashes/painting of various tints complete all as specified and as directed by Engr-in-charge

S & F pre- painted Galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covring, fixing ,zinc coatting including self tapping screw etc.including taking down old sheets complete all as specified and direced.

M& Lfor two coat of camouflaging APEX paint on old plastered/ unplastered surfaces of walls, pillers,cornices by brooming down or steel wire brushing, scraping down, moulds, moss and efflorescence salts and oil and greasy spots of old painted surfaces including edges using necessary fillng compound of ALTEK putty to obtain smooth finish using sand paper and necessary repair with putty complete all as specified and directed.

M&L for applying two coats of oil bound distemper by spray machine incl preparation of old surface by complete removal existing treatement on walls through electrical operated grinder etc, incl necessary minor repair of wall by putty complete all as specified and directed.

M&L two coats of synthetic enamel paint over steel surfaces of any area including preparation of old surface complete all as specified and directed.

M&L filling for existing concrete roads with joint sealing compound grade A (normal in 25kg /30 kg joint sealing compound including taking down of old sealing compound cleaning of dirt with wire brush and grass grown in between of joints compleate al as specified and directed.

M& L for cleaning of grass and soil on the railings of existing steel rolling gate and applying greasing over railing and making the door asseseble and using necessary eqpt for making it asseble as reqd.

M&L 4 mm thick desginer ceiling board in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour incl Dismantelling of OLD ceiling boards (fibres pulp insulation etc or insulation boards/slabs blanket any thickness including cover fillets.all as per instruction complete all as specified & directed.

M &L for PVC hollow wall panneling 5 to 7mm thick any colour as approved by engr in charge inclusive of fixing on to wall incl moulding of end caps fixed with PVC sleeves screw ,screw as required at site complete all as specified and directed

M & L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete (Fe 410-W (Gde-E-250) quality A) all as specified and directed.

M&L for Virified Ceramic tiles light/dark shade 8 to10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, on vertical surfaces of wall etc. set and jointed in neat cement slurry over 15 mm thick screed bed over and including or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition of any type of floor and rubbish off the primises etc complete all as speciefied and directed.

M&L for green marble 14-16 mm thick over cement screed bed laid on 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab / staircase / steps,riser incl rubbing and polishing ,moulding rounding to edge of marble & dismantling of exusting any type of floor complete all as specified and directed.

M&L, Rendering 15mm thick in CM 1:6 on of brick work or concrete surface finish even and fair (w/o using extra cement) incl taking down old plaster on brick or stone walls & dispose off debris where directed by EIC, complete all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and fair (w/o using extra cement) incl taking down old plaster on brick or stone walls & dispose off debris where directed by EIC, complete all as specified and directed. Note : (WPC shall be measuared seperatly and @ 200ML for 50kg cement bags or as per manufacturer's instructions).

Supply only liquid WPC complete all as specified.

M& L for two coat of camouflaging APEX paint on new plastered surfaces of walls, pillers,cornices using necessary fillng compound of ALTEx putty to obtain smooth finish using sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper by spray machine incl preparation of old surface and complete removal existing treatement on walls through electrical operated grinder etc, incl necessary minor repair of wall by putty complete all as specified and directed.

M & L for two coat of white wash incl preparation of old plaster surface of ceiling complete all as specified and directed.

M & L for repair to RCC Chajjas, roof projection edges ,hanging part of chajjas, edges of chajjas, RCC paraets, under the roof / floor slabs with PCC 1:2:4 (using 12.5mm crushed graded agg) , form work were required , MS wire mesh for bonding the concrete on ground required and plaster work in CM 1:3 & periodical services to match with the existing surfaces finishing at any height of buildings etc completed all as specified and directed by Engr-in-Charge.

M&L, kota stone slab flooring 18 to 20 mm thick of size ( 600 x 600) over and incl cement screed base laid on 15 mm thick CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing incl chamfering edge splays complete all as specified

Description all as as per item no 22 but in riser of steps ditto

S&F in repair mild steel powder coated curtain rods 20mm dia of approved quality incl bracket, knobs etc complete all as directed, by Engr-in-Charge.

M&L 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate as in leveling cource in roof finishes even and smooth without using extra cement complete all as specified as directed.

M&L for applying two coat of undiluted thick water based UV resistant elastorneric Polyurethane liquid membrane with UV resistance properties and solar refelctive properties of 109 over one coat of primer (1:3, Dilution:water) Note: Every each coat interval between 6 hrs) ,having solid content more than 80% and elastic recovery @150% elongation %---70 to 75 . complete all as specified and directed

S&F in repair for 3mm thick, sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 Sqm in each pane fixed with oil putty or beads and incl hacking out glass old complete all as specified and directed.

Taking down Chowkats or frames with shutter without taking off shutter from the frame area exc 1.5 but n.exc 4 sqm each complete all as specified and directed.

M&L for anodised aluminium framed work for door, window / vent (powder coated) aluminium section weighting 0.55kg/RM with one or more rebated incl jointed cleat for fixing etc complete all as specied and directed

M&L for anodised aluminium powder coated door, window and ventilator shutters, aluminium section weighting 0.55kg/RM fixed type with or without sash bar, incl necessary 4.8mm th sheet glass ordinary quality & glazing / black or PVC sheet joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 Nos aluminium handles 150mm, 3 nos 100mm hinges as required, 2 x Aluminium tower bolts 150mm with each shutter any type complete all as specified all as specified.

S & F of roof trusses (framed ,) trussed , purlins , crane enteries,rails and fastening and heavy bracket framming ) beam tee, angle , channel or flat of FE 410 W E-250 quality B complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (using 20mm graded agg.) in 50 mm thick plinth protection, path and paving incl demolition and rubbish off the primises all as specified and directed.

M & L for PCC 1:2:4 Type B-2 of 100mm thick (using 20mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement, removing rubbish off the primises as directed by engr in charge and incl demolition complete all as specified & directed .

M&L camouflaging painting incl preparation of old steel surfaces cgi sheets of any area, of width or girth, over a coat of red oxide and applying two coat of Fire proof synthetic enamel paint to provide camouflaging effect by obsecuring outline splashes/painting of various tints complete all as specified and as directed by Engr-in-charge

S&F in repair for 15 mm bor GI tube medium grade freed to wall or under floor incl taking up or down old tube complete including cutting closes and make good in CM 1:3 complete all as specified and directed.

S& F in repair 20 mm bore G.I tubing in new or old location (wall/Roof) with all fittings incl taking up or down old tube complete all as specified and directed.

S&F 15mm dia, stop valve/angle valve with capstan head , chromium plated fancy type screwed down high pressure with cup and concealed type screwed for iron pipe and fixed in repair , complete all specified

S&F 15mm dia, bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repair (minimum wt 90 grams) complete all specified

S & F in repair for viterous china wash down water closet pan (pedestal pattern) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed.

S & F in repair for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed incl cement concrete bedding as required set complete all as specified and directed.

S&F in repair PVC Flushing cistern valveless symphonic action low level with inlet , ball, float valve push button type handle and all accessories of 10 Ltrs capacity with 32 mm dia PVC heavy duty flushing pipe for squatt pan including brackets.

S&F in repair PVC connection 15 mm size PTMT nut of length 450 mm.

M&L for framed work as in doors or gates of angle or other section with gusset plates rails braces etc complete drilled for fixing of steels sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering runnuing rails and guides ) and hanging also fastening / fixing / welding complete.with using Fe 410w (E-250 quality A )

Double action floor spring hydraulically regulated made upto minimum 1.25 mm thick aluminium alloy sheet fdn box main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty and fixed.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete using extra cement including forms, moulds end etc

M&L for PCC(1:3:6), type C-2, using 40 mm graded aggregate as foundation / mass concrete complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, with grey cement, pigment with 25mm thick sand filling incl dismantling and rubbish off the primises all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyetheylene water storage tanks white (triple layer) (cylindrical verticlal with closed top) hoisted and fixed repair in position including dismantling existing water tank complete all as specified and directed.

M & L for PCC 1:2:4 Type B-2 of 50mm thick (using 20mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement laid as per instruction in alternate bays were ever as directed and, removing rubbish off the primises as directed by engr in charge and incl demolition complete all as specified & directed .

Taking down aluminium point wiring from existing conduit / batten (light, fan, socket or power) complete such as switches, ceiling rose, pendent, regulators, socket, light fittings etc and removing material from site and making good the disturbed surface of wall / floor etc, complete all as specified and directed

M&L for point wiring (surface) for open/closed hanger complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable upto and incl working voltage 1100volts grade,PVC conduit, medium grade,ISI marked with fittings such as bend, tee, junction boxes elbows etc incl pressed stee terminal sunken boxes covered with 3mm thick plastic laminated sheet ISI marked top cover fixed with Brass screws, cup washers and unsheathed copper conductor cable earth continuity wire connetctd to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area conductor and all other metal parts with earth dolly complete all as specified and directed for one light /fan/ buzzer point controlled by one 5 Amp switch one way

All as per Srl item No 52 above but for one 5 amps socket out let independent complete all as specified.

All as per Srl item No 52 above but on the same board complete all as specified

All a per item No 52 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and Fixing switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed

Supply and Fixing socket outlet 5 pin, 6 Amps flush type 230 volts AC complete all as specified and as directed

Supply and Fixing switch piano 16 Amps type one way 230 volts AC complete all as specified and as directed

Supply and Fixing socket outlet 6 pin 6/16 Amps multi purpose flush type 230 volts AC complete all as specified and as directed

Supply and fixing ceiling rose 65X50 mm two to three terminals complete all as specified.

Supplyand fixing in replacement of MCB single pole 6 to 32 Amps, breaking capacity 10ka , 'C' series complete all as specified and directed

Supplyand fixing in replacement of MCB single pole 40 Amps, breaking capacity 10ka , 'C' series complete all as specified and directed

S & F in replacement of MCB SPN 32 amps single pole with neutral, AC 230 volts, breaking capacity 10ka , 'C' series complete complete all as specified and directed.

Supply and fix industrial metal clad, Plug and Socket, 2P+E, 230 Volt AC, including MCB 40 Amp, DP with breaking capacity 10ka, C series complete all as specified and as directed.

Supply and fix industrial metal clad, Plug and Socket, 3P+N+E, 415 Volt AC, including MCB 32 Amp, 4P with breaking capacity 10ka, C series complete all as specified and as directed.

Supply and fix industrial metal clad , Plug and Socket,3P+N+E, 415 Volt AC, including MCB 63 Amp, 4P with breaking capacity 16ka, C series complete all as specified and as directed.

Supply and fixing in replacement of sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

S&F in replacement sheet metal powder coated VTPN DB double door 4 way including MCCB 200 amps, 415 Volts, 50 Hz AC 16 ka 4 pole with copper bus bar rated 200 amps neutral link, earth bar and din rail for fixing the MCB,s complete all as specified . Note :-Outgoing MCB,s Shall be measured and paid seperately in relevant item.

S&F in replacement sheet metal powder coated VTPN DB double door 4 way including MCCB 125 amps, 415 Volts, 50 Hz AC 16 ka 4 pole with copper bus bar rated 200 amps neutral link, earth bar and din rail for fixing the MCB,s complete all as specified . Note :-Outgoing MCB,s Shall be measured and paid seperately in relevant item.

M & L in replacement of out door type aluminuam bus bar chamber feeder box of cap 300 Amp , 3 phase, 4 wire, 415 Volts with porcelain insulator of size 90cm(Ht) x 60cm(length) x 45 cm (width) made out of 3.15 mm CRCA Sheet duly painted with two coats of synthetic enameld paint over a red oxide primer and fixed and supported with anlge iron grouted in PCC 1:2:4 upto 0.30 mtr high from ground level all as directed by Engr-In-Charge.

M&L for Sub main wiring with 2 single core 6 sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/surface conduit,25 mm or higher dia. ISI marked, medium grade complete with all conduit accessories/ fittings including extension earth wire with 6 Sqmm single core PVC insulated, unsheathed copper cable fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. Note :- Three run of 6 sqmm copper cable measured as one unit.

M&L for Sub main wiring with 4 single core 16 sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including steel concealed/surface conduit of suitable size. ISI marked, medium grade complete with all conduit accessories/ fittings including 02 Nos earth wire with 16 Sqmm single core PVC insulated, unsheathed copper cable fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. Note :- Six run of 16 sqmm copper cable measured as one unit.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PART 1 , with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switch, DBs) complete all as specified & testing on completion.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized GI strip of size 32 X 6 mm and 40 mm dia bore 7.5 mtr long light grade GI protection pipe for earth strip and GI watering pipe 40 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009. Note :- All joints either strip to strip of strip to earth plate are fixed with welded joints.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5mtr in depth for foundation of pole and laying of UG cable and getting out in any type of soil complete all as specified and directed.

Returning filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25cm completed all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5M above the starting point complete all as directed.

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE 50 sqmm 3.5 core, PVC insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area are as under including disconnecting and taking out old unsv LT cable.Note : (I) Earth work shall be measured and paid separately .

S&F DWC high density polyethelene pipes in replacement having dia 63/50 mm, as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof/trench and including all fittings as required at site including aking down the old unserviceable complete all as specified and directed.

Supply and fixing in replacement of LED T-8 tube light fitting with single side connection LED tube rod 18/20W 4 feet 1 x 18/20 watt MS CRCA box type including rotary type bipin holder and connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed.

Supply and fix LED flood light fitting of capacity 200 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 with high power LEDs as light suorce with electronic chip and driver (lamp type 200 WLED) suitable for pole dia 63mm(max) complete all as specified and directed by engr-in-charge.

S&F in replacement LED recess mounting powder coated white CRCA full glow panel 45 watt 2x2 ft incorporated with all fixing arrangements including driver complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size. complete all as specified.

S&F in replacement of MCCB capcity 250 Amp ,36 KA, 4 Pole adjustable thermal megnate to release type with preader and aluminum lugs all as required at site complete.

Material and labour for sand cushioning to under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable complete all as specified and directed.

Material and labour for Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable with width equal to length of brick complete all as specified and directed.

M&L for point wiring (concealed)complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable upto and incl working voltage 1100volts grade, PVC conduit, medium grade,ISI marked with fittings such as bend, tee, junction boxes elbows etc incl pressed steel terminal sunken boxes covered with 3mm thick plastic laminated sheet ISI marked top cover fixed with Brass screws, cup washers and unsheathed copper conductor cable earth continuity wire connetctd to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area conductor and all other metal parts with earth dolly complete all as specified and directed For one light /fan/ buzzer point controlled by one 5 Amp switch one way

All as per item No 86 above but for one three pin socket outlet 5 Amps independent board complete

All as per item No 86 above but for one three pin 5 Amps socket outlet on the same board with other switches

All a per item No 89 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete.

Supply and Fixing fan regulator, electronic step type heavy duty 230 volts complete all as specified and as directed.

Supply and fixing in replacement of sheet metal enlosure for DBs when MCBs to be used double door factory made flush fixed complete with 100 amps rated bus-bar 240 volts single phase 4 ways including necessary brick work and plaster to match with the existing surface complete all as specified.

Sub main wiring with 2 single core 10 sqmm, PVC insulated PVC unsheathed stranded copper conductor cable in and including PVC concealed/surface conduit,25 mm or higher dia. ISI marked, medium grade complete with all conduit accessories/ fittings including extension earth wire with 10 Sqmm single core PVC insulated, unsheathed copper cable fixed along with sub main in PVC conduit and connecting to earth dolly with all fixing material complete all as specified and directed. Note :- Three run of 10 sqmm copper cable measured as one unit.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with louvrers and shutters including making and finishing good hole including fixing of required nut ans bolts in wall for fixing Exhaust fan of 300mm sweep, necessary brick work and plaster to match the existing surface complete all as specified.

S&F Wall mounting Fan 450 mm sweep with complete accessories including supply and grouting the ragged bolts in wall, fixing the frame and connecting with and including PVC insulated three core 23/0.0076 copper cable, rubber insulated from ceiling rose to wall mounting fan motor and writing MES No with black synthetic enamel paint 2.0 cm high complete all as specified and directed.

Supply and fixing ceiling fan 1200mm sweep including hanging arrangement to (such as down rod, hook / clamp / bracket) existing woooden/ steel frame structures complete all as specified and directed.

Supply and fix LED Flood light fitting of capacity 120 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 with high power LEDs as light suorce with electronic chip and driver (lamp type 120WLED) suitable for pole dia 63mm(max) complete all as specified and directed by engr-in-charge.

Supply & Fix LED High bay light 120 watt with input voltage AC 90V-300V, 50 Hz, lumen >12000 , PF>0.9 high power SMD LED cool white,light engine driver base including necessary suspension wire and necessary electrical connection complete all as specified and as directed.

M&L MS framed work such as grills, gratings with ends of bars shouldered and or rivated or forged into spikes, framed guard bars and similar work confirming to Fe 410 or Fe 310-0 in repairs complete all as specified and directed.

M&L for preparation of new and previously un-treated steel and iron surfaces of any description, not otherwise described exc 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified

M&Lfor welded mild steel wire fabric weight Not exc 4kg/sqm,cut to length, bend to shape required and including galvanised steel stapples fixed complete to steel membrene (fillet shall be measured separately).

Material and labour for applying three coats of white wash on on walls including preparation of new or previously untreated surfaces all as specifiedn and directed.

M&L for brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with locally available sub class ‘B’, old size, best quality bricks, in 1/2 brick thick honey comb walling built in cement mortar ( 1:6) complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20 mm graded stonr aggregete)as in coping,benching foundation filling etc complete all as specified and directed.

M&L for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded stone aggregate as in surface channel and drain.

M&L for pre cast RCC (1:2:4) type B1(using 20 mm graded stone aggregate). as in cover slabs and set in cement mortar 1:4 including necessary form work and moulds complete

S&F mild steel TMT bars 10 mm dia and over cut to length bend to shape rtequired including cranking binding spirally for hooping for columns hooking and binding with and including mild steel wire(anneled not less than 0.9 mm dia or securing with clips quility conforming to Fe -410 S or Fe 410-0.

.Ditto as per item no 107 here in before but 6 to8 mm dia.

M&L for Reinforced concrete pipes 150 mm dia class NP3 laid and jointed compleate with collers all as per specified and directed

Material and labour for PCC (1:3:6) type C2 using 40 mm graded aggregate bed to drain pipe for 150/160mm bore including packing under and hunching against side of pipe after they are laid and tested.

ss enterprises

tarlok singh contractor

Santokh Singh and Associates

tee pee enterprises