Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.1 CrAdmitted-Finance | ₹2.1 Cr | L1 | Admitted-Finance |
| 2 | L2₹2.2 Cr+₹3.8 L (1.80%)Admitted-Finance | ₹2.2 Cr+₹3.8 L (1.80%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | GROVER APPLIANCES L2 | Rehman Builders Pvt. Ltd. L1 |
|---|---|---|---|---|---|
| 1.00 | Less cost of old Scrap material for 160 kvA DG set complete in all respect | 1 | Job | 1,50,000 ₹-1,50,000 Lowest | 7,00,000 ₹-7,00,000 |
| 2.00 | Supply, erection, testing and commissioning of Twin Lobe Air blower, Capacity: 3140m3/hrs, RPM-1000, Motor Kw/RPM: 90/1500 including safely and all require parts as per requirement like Motor, Tire Coupling, Suction and Discharge silencer, NRV,PAV , Expansion below, Filters, canopy, and Motorized Valve with labor and loading unloading hydra etc. without any damage, in case of damage contractor will born all the expenditure of damage parts and Install New Supplied Air blower with proper alignment and with refitting of all existing spare and provide successful trial run with rated Norms like Current, Vibration, Noise etc. All wear and tear will be borne by contractor complete in all respect as per entire satisfaction of the Engineer –in – charge. Make :- SWAM PNEUMATICS PVT.LTD. / Everest / Kay | 2 | Each | 10,68,500 ₹21,37,000 Lowest | 14,58,512.25 ₹29,17,024.5 |
| 3.00 | Design and Construction of RCC M-25 Framed structure Building (Single Storey) Confirming to National Building Code for Panel Room including all Electrical, Mechanical and other contingent work thereto as per sizes and specification given in the DNIT. Total Minimum area of above buildings are 250 Sqm or more if required as per design complete in all respect | 250 | Sqm | 33,375 ₹83,43,750 | 32,000 ₹80,00,000 Lowest |
| 4.00 | Providing and applying three coats of Coal Tar Epoxy including preparation of plastered / concrete surface complete with component of RSM-0255 Epoxy Resin, HSM-045 Epoxy hardener with a thickness not less than 450-500 micron applied as per standard specification complete in all respect. | 1,092 | Sqm | 350 ₹3,82,200 Lowest | 600 ₹6,55,200 |
Tender Value
₹1.6 Cr
EMD Value
₹3.2 L
Closing Date
15 Apr 2026, 11:00 amClosed
PARIK GARG
Division - Sewerage
Supply, erection, testing and commissioning of Twin Lobe Air Cooled Air Blower,
2026_HRY_512954_1
2026441E42E3 74C5 421A BD74 ABA311623A8F717001
Open Tender
Civil Works
Works
270 days
Gurugram
2 documents required · 2 mandatory
₹1,180
₹3.2 L
Yes
Plot No. 3 Sector-44, Gurugram
26 May 2026
4 Apr 2026
16 Apr 2026
4 Apr 2026
15 Apr 2026
4 Apr 2026
4 Apr 2026 - 6 Apr 2026
13 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Less cost of old Scrap material for 160 kvA DG set complete in all respect | - | Job | - | - |
| 2 | Supply, erection, testing and commissioning of Twin Lobe Air blower, Capacity: 3140m3/hrs, RPM-1000, Motor Kw/RPM: 90/1500 including safely and all require parts as per requirement like Motor, Tire Coupling, Suction and Discharge silencer, NRV,PAV , Expansion below, Filters, canopy, and Motorized Valve with labor and loading unloading hydra etc. without any damage, in case of damage contractor will born all the expenditure of damage parts and Install New Supplied Air blower with proper alignment and with refitting of all existing spare and provide successful trial run with rated Norms like Current, Vibration, Noise etc. All wear and tear will be borne by contractor complete in all respect as per entire satisfaction of the Engineer –in – charge. Make :- SWAM PNEUMATICS PVT.LTD. / Everest / Kay | - | Each | - | - |
| - | Design and Construction of RCC M-25 Framed structure Building (Single Storey) Confirming to National Building Code for Panel Room including all Electrical, Mechanical and other contingent work thereto as per sizes and specification given in the DNIT. Total Minimum area of above buildings are 250 Sqm or more if required as per design complete in all respect | - | Sqm | - | - |
| - | Providing and applying three coats of Coal Tar Epoxy including preparation of plastered / concrete surface complete with component of RSM-0255 Epoxy Resin, HSM-045 Epoxy hardener with a thickness not less than 450-500 micron applied as per standard specification complete in all respect. | - | Sqm | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.92 MB
BOQ_591772.xls
BOQ • 0.33 MB
777821Z156178.pdf
Additional Documents • 19.42 MB
OT0156178.pdf
Other Document • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .