External electrical work at various transfer station(second call)

Amount

External electrical work at various transfer station

1000006006-11 kv Pin (polymer) disc insulator

3000003705- DTR energy meter Supplying & installing totally enclosed 3 phase meter box of suitable pattern as per MPSEB requirement, fabricated with 16 SWG MS sheet duly painted with 2 coat of red oxide primer and 2 coat of synthetic enamel paint, suitable space to accommodate LPR type LT meter with CT's/HT trivector meter, providing required mounting plate/strip for energy meter, TTB & CTs, glass window for meter reading, incoming/outgoing cable, connection with proper size of lugs, earthing terminals etc. complete with all materials including providing, installing, testing/calibration from MPSEB (testing/calibration charges of meter and CTs will be bourn by agency) and connecting the following meter: CT operated 3 Ph. 4 Wire, 0.5 accuracy class LT DTR energy meter with LPR feature including GSM, modem etc. with 4 No. resin moulded 100/5 or 200/5 or 300/5 ratio LT CT as per MPHBSOR.

3000002019-TENSION CLAMP( DEAD END) Supplying & fixing of Aerial bunch cable accessories Tension clamps(Dead end) i/c required attachment for single core cable of approved make in Air with clamp, necessary material as per specification for required size

3000001215-Clamp for Neutral Supply and installation of Clamp for Neutral

3000001218-Piercing connector type-II Supply and installation of Piercing connector type-II fo single phase/three phase.

3000001217-Piercing connector type-I Supply and installation of Piercing connector type-I for Single Phase/three phase

3000001213-Suspension clamp Supply and installation of Suspension Clamp

3000003706-fencing of chain link mesh Supply & fixing fencing of chain link mesh 100 x 100 mm, 12 SWG GI wire for electric sub-station switch yard including single post of angle iron size 50x50x5mm, 2.5 mt long should be provided up to 2.00 mt. apart or as required with required angle iron/ flat iron members /cross members for frame between the post & welded mesh including cement concrete, excavation of pit and refilling the same . The fencing shall be provided with one entrance gate including locking arrangement as required as per specification. The height of fencing shall be 2 mt. above ground level. Fencing shall be painted with required shade.

3000010793- 63 kVA Transformer Supplying, installing, testing and commissioning of 11/0.4 K.V. 3 Phase 50 Cycle oil immersed, naturally cooled, out door type transformer connected delta on H.T. side and star on L.T. side, hand operated off load Tap changer switch above 100 kVA, oil conservator with drain valve, plug 63 KVA and above, dehydrating silica gel breather on eye level, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge, drain valve with plug, temperature not exceeding 50ºC on load, oil filling hole with plug, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable box on LV side, first filling of oil upto desired level and transformer installing on existing structure with all required materials arrangement as required as per as mppwd sor Aluminium wound 63 kVA

3000010794-Supplying & drawing / laying Supplying & drawing / laying of PVC insulated XLPE Aerial bunch power cable conductor H2/H4 grade Aluminium Solid/stranded confirming to IS-14255- 1995, Alu. Alloy insulated messenger 1100 volts grade cable of approved make in Air with necessary material as per mppwd sor (i) Single Core cable( Insulated neutral messenger) ii) Single Core cable( Insulated neutral messenger) 3x70 Sq.mm, 1x16(St.Light), 1x35( Insulated neutral messenger)

Bidder Name

Amount

JAGDAMBA FOUNDATION

RIGHTWAYS CONSTRUCTIONS

RIGHTWAYS CONSTRUCTIONS

JAGDAMBA FOUNDATION