Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹55 L
EMD Value
₹1.1 L
Closing Date
15 Jul 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Projects Div. JMC
Town Hall JMC
Construction of Mechanical Workshop at Nikki Tawi, Phalain Mandal, Jammu
2022_HAUDD_175863_1
e-NIT No 17(P) of 2022-23 of Projects Div. JMC
Open Tender
Civil Works
Item Rate
90 days
Jammu
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
Executive Engineer, Projects Div. JMC
₹1.1 L
Yes
18 Jul 2022
24 Jun 2022
16 Jul 2022
24 Jun 2022
15 Jul 2022
24 Jun 2022
90 days
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soil
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete includingcuring but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stoneaggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more
Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns
Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc.
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts
Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms
Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls under 20cm wide
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
Half brick masonry with common burnt clay (non-modular) bricks of class designation7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)
Extra for half Brick masonry in superstructure above plinth level upto floor V level
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes
15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand)
Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)
12mm Cement plaster finished with a floating coat of neat cement of mix:1 : 4 ( 1 cement : 4 fine sand)
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaftwith brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge 20mm nominal outer dia pipes.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge External work including trenching, refilling etc. 25mm nominal outer dia pipes
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 Jaquar, Hindware, CERA
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion 75 mm diameter
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion 110 mm diameter
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion 75 mm bend
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm bend
Providing and fixing of floor trap
Providing and fixing of P-trap
Providing and fixing of CP Grating
Providing and fixing of PVC Waste pipe for sink or wash basin including PVC waste fitting complete 32 mm dia of approved brand and manufacture
Providing and fixinguplasticized PVC connection pipe with brass unioun 15 mm nominal bore of approved brand by Engineer incharge
Providing and fixing of CP brass waste coupling
Providing and fixing1 piece European type WC with all fittings incl. cover, CP jet of JAQUAR or EQVT make
Providing and fixing wash basin with C.I bracket 15mm dia, CP brass, single whole basin mixture of approved quality and make incl. painting of fittings and brackets, cutting an making good the walls weherever required a) White Viterous china wash basin 550 x400mm with 15mm CP brass single whole basin mixer
Providing and fixing Pillar cock of JAQUAR or EQVT make
Providing and fixing of Towel ring
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing (Rectangular shape 453 x 357mm)
Wiring for light point/Tan point/celling fan point/exhaust fan point/call bell point with 1.5 Samn FRLS PVC insulated, copper conductor cable in surface/recessed medium class PVC conduit, with plana type switch phenolic, laminated sheet, suitable size MS box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc. as required (Wire Make Isl Marked) a)Group ‘C’
Wiring for circuit/sub-main wiring along with earth wire with the following sizes of FRLS PVC Insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. (Wire Make 151 Marked) a)2x1.5 1x1.5 Sq mm
Wiring for circuit/sub-main wiring along with earth wire with the following sizes of FRLS PVC Insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. (Wire Make 151 Marked) b)2x2.5+ 1x2.5 Sq mm
Wiring for circuit/sub-main wiring along with earth wire with the following sizes of FRLS PVC Insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. (Wire Make 151 Marked) c) 4x6 sq. mm +2x6 sq. mm
Supplying and fixing 5 amp to 32 amps rating, 240/415 volts, 10 KA C curve miniature circuit breaker of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required a) Single pole
Earthing with Copper earth plate 600mm x 600mm x 3mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/coke and salt as required.
Supply & fixing 15/16 amp piano type switch on the switch box or cover including connection as required.
Supply & fixing 6 pin 15/16 amp socket outlet on the 450 twitch box or cover including connection as required.
Supply & faxing 5/6 amp piano type switch on the switch box or cover including connection as required.
Supply & fixing 3 pin 5/6 amp socket outlet on the switch box or cover including connection as required
Supplying and fixing following ways and poles, plain/horizontal sheet steel MCB Distribution Board on surface in recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections including powder painted earthing etc. as required (But without MCB/RCCB/Isolators) a)6 way, Double door
Supply & fixing stepped type electronic fan regulator on the switch box including connections as required.
Supplying and fixing of following ratings and poles 240/415 volts SPN/Isolator in the MCB DB complete with connections, testing and commissioning etc. as required a)63 Amp 240 volt Double Pole Isolator
Supplying and fixing of following ratings and poles 240/415 volts SPN/Isolator in the MCB DB complete with connections, testing and commissioning etc. as required a) 63 Amp 415 volt Four Pole Isolator.
Supply & Installation of following type of surface mounted/recessed mounted decorative Indoor Linear energy saving, energy efficient LED Lumainiers complete with connection testing and commissioning a) 4 feet 20 watt ,230 volts LED batten type tube light fitting complete.
Supply/installation of the following type of outdoor decorative energy efficient LED flood light/gate lights and Street lights luminaries complete with all accessories connection testing and commissioning as required a)50 watt, 230 volts IP 66/IP65.
Supply, testing and commissioning of PVC sheathed Aluminium conductor 1100 volts graded PVC AA Armoured/unarmoured XLPE Cable including end termination, crimping, cost of thimbles, nuts bolts, glands, connection, testing and commissioning including laying in duct and duct work (complete job) 3.5 core 50 sqm armoured Cable.
Supply, installation, testing, commissioning of 1200 mm Swap ceiling fans complete with blades and hanging hooks.
Supply, Installation, testing, commissioning of heavy duty 300 mm sweep efficient exhaust fan.
Providing/fixing following rating 230 volts energy saver LED Lamps 12 watt LED.
Providing/fixing 63 amp rating 230 volts SPN MCB in the existing MCB DB or enclose complete with connection testing and commissing complete Job
Providing and fixing following rating and breaking capacity MCC with Thermomagnetic release and terminal spreaders as cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required a) 125 AMP 36K 4 Pole MCCB
Supplying and fixing of following ways surface/ recess mounting vertical type, 415V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bys bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs as required 8way (4+4) Double door
Supplying and fixing 3pin, 5A ceiling rose on the junction box including connections as required
Supplying and fixing of batten / angle holder including connections as required.
Construction of Pedestal for Inauguration plate and foundation plate of size 3’-0” x 2’-6” black granite with engraving writing words including brick work, plastering and other allied items (Complete Job)
Carriage of material by Mech.Transport from source to site of work a) Sand for 5kms
b) Bajree for 07 Kms
c) Brick for 25 Kms
Vinod Kumar Govt Contractor
Asif Mir Contractor
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .