Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹75.6 LAccepted-AOC | L1 | Accepted-AOC Low | |
| 2 | L2₹65.3 L+₹1.2 L (1.81%)Rejected-AOC | L2 | Rejected-AOC High |
Tender Value
₹75.8 L
EMD Value
₹48,000
Closing Date
19 Mar 2024, 12:00 pmClosed
Inspector
Gingee Inspector Office HRCE Department Gingee Taluk, VIllupuram
Renovation work for Sivan sannathy, Amman sannathy, Rajagopuram, Vinayagar sannathy, Urchavar Mandapam, Madapalli, Navagragam and Yagasalai and Compound wall in Arulmigu Rishabhapurishwarar Thirukovil, Melsevur, Gingee Tk, Villupuram Dt
2023_HRCE_399171_1
01/13-12-2023
Open Tender
Civil Works
Lump-sum
180 days
Melsevoor
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹48,000
Yes
8 Nov 2024
18 Dec 2023
19 Mar 2024
18 Dec 2023
19 Mar 2024
18 Dec 2023
Amount
Providing Scaffolding for vimanam raja gopuram with non flammebable materials wherever necessary for main form work and by providing coconut keeth as covering the areas & plat form for inspection etc all complete.
Vimanam Height upto 15'-0"
Vimanam Height upto 25'-0"
Vimanam Height upto 50'-0"
Labour Charges for Old Stone Removing For Flooring
Labour Charges for Old Stone Removing
Labour Charges for Old Stone Fixing
Supply of cut stone for carrying out Garpagraham, Arthamandapam, Maha Mandapam, Thirumathil and other Temple Structures upto 10 feet length
Labour Charges for dressing
Door Frame
Uthiram
Flooring
Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs
Filling with foundation and basement with Msand in 15cm. Thick layers well rammed & consolidated, including watering, complying with std.specification etc complete.
Paving with cut stone flooring using cut stone of size600x600mm and 100mm thick and all the sides are machine cutting, top surface is neatly dressed and pointing with lime mortar 1:1.5 including all materials and labour charges.
Painting two coat with approved water based Exterior Emulsion over the cement plastered wall surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete as per specification
Dismantling Lime Concrete
Weathering course with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over R.C.C. roof slab in the proportion of 32:12.5 and well watering consolidated with wooden beaters to slop including cost and conveyance of materials to site and labour charges etc complete for 10Cum
Plastering with Lime Mortar 1:1.5 mix (one lime and one and half sand ) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of lime used including finishing , curing, etc., complete in all floor complying with standard specification and as directed by the departmental officers.
Restoration by providing herbal water wash and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc
Pointing with Lime mortar 1:1.5 including all tools and plants and labour etc., all complete
Supplying and fixing teak wood temple type door including all materials, labour charges for manufacturing and fixing I position including all furniture fittings etc complete with std specifications.
Painting two coats over new wood works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete
Painting two coats over old wood works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete
Dismantling Brick / Stone Masonry in cement mortar walls under 3m high
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in existing trunking box on wall and ceiling with with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire for Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End
Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End
Supply and fixing of single box type 1 x 20 W single LED fitting complete with TW round blocks on wall or ceiling with LED tube with PVC unsheathed Copper leads from terminals to the fitting.
Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete With S&F of Suitable AI frame on wall with PVC unsheathed copper leads with MS clamps with S&F of SMC box with 10 SPMCB (Higher end ) and with painting
Supply and fixing of fancy glass shade and 9W LED for BH point.
Supply and fixing of WT bulk Head fitting with Guard with 9W LED bulb
Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( GI ) with module cover plate (plastic) on wall with connections. Higher End
Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End
Supply and run of 35mm x 20mm powder coated duct with door arrangements complete with MS angle and bolt & nuts comple.
Supply and run of 35mm x 45mm powder coated duct with door arrangements complete with MS angle and bolt & nuts comple.
Supply and run of MS flat for clamps of size 2' x 1' on pillar with suitable Bolt / nuts and painting of suitable colour.
Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in the existing PVC duting with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire .
Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in the existing PVC duting with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire .
Supply and clamping of 4 x 2.5 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps.
Supply and laying of 4 x 2.5 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
Supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps.
Supply and fixing of brass cable gland for 4 x 25/ 10 sqmm PVC armoured LTUG cable with earth connection.
Supply and providing cable end termination of 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End
Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End
Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains.
Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains.
Supply and fixing of powder coated box on wall fabricated with MS sheet of 16 gauge of size 900mm x 300mm x 450mm with 3 nos. of 63A (500V) porcelain fuse units, 1 no. of 63 TPN sheet steel double break switch with HRC Fuse units provision for fixing TNEB meter with electrical connections complete.
Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only.
Supply and fixing of 32A DP MCB in sheet steel enclosure box with electrical connections complete.
Earthing as per the PWD standard with an earth electrode of 2mt class 'B' GI pipe of dia not less than 32mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
Supply and fixing of brass cable gland for 2x4 ( 4 x 2.5) sqmm PVC armoured LTUG cable with earth connection.
sub total
sundiramurthi
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_475273.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .