REPAIRS TO WALLS, GLAZING, PLUMBING, PERIODICAL, SANITARY AND EMENTED WORKS IN NORTH CAMP AT AFS UNDER GE (AF) SAMBRA

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) of any thickness and in any position and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling and breaking up drain pipes (salt glazed ware, AC, reinforced concrete, PVC or Cast iron) set in cement mortar of 100mm/75mm bore fixed over wall or in floor including clamps etc., complete all as specified and directed.

Taking down cement rendering/plastering of any thickness and of any description including raking out joints, hacking for key, scrubbing down with water etc., over wall or ceiling surfaces complete all as specified and directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) including hold fasts from wall and making good in cement mortar 1:4 complete all as specified and directed.

Taking down chowkhats or frames exceeding 1.5Sqm each but not exceeding 4Sqm each with shutters (without taking off shutters from the frames) including hold fasts from wall and making good in cement mortar 1:4 complete all as specified and directed.

Taking down shutter of any description and material exceding 1.00 Sqm each complete all as specified and directed.

S&F in repairs fancy type 15mm bore dia long body fancy type bib tap chromium plated cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified and directed.

S&F in repairs fancy type 15mm bore dia short body fancy type bib tap chromium plated cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified and directed.

S&F in repairs 15mm bore dia fancy angle stop valve, chromium plated, cast copper alloy, screwed down, high pressure, screwed ends for water pipe fitting or for unions including CP finish cup washer/wall flange complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 10 lites capacityr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, and handle/push type, including 32mm bore dia PVC long/short flusing pipe and brackets complete all as specified and directed.

S&F in repairs fancy type square shape of minimum size 100mmX100mm swivel shower of cast stainless steel, including CP finish shower rod (long) and cup washer/wall flange for fixing with 15mm bore dia pipe/fittings complete all as specified and directed.

S&F SS gratings 125X125mm size with openable circular dia grating with or without waste hole including necessary cutting and make good of floor complete all as specified and directed.

S&F in repairs tubular brass chromium plated towel rail 20mm dia "D" type 60cm long between flanges complete all as specified and directed.

S&F in repairs CP finish soap dish cast stainless steel fixed to plugs complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white in colour, flat back of size 550mmX400mmX200mm and 32mm bore dia CP finish copper alloy waste fitting/coupling, including cutting for and pinning in ends of brackets or erecting stand brackets complete all as specified and directed.

S&F wall mounted Sheet glass shelf assembly consisting of acrylic sheet shelf 12cm wide with chromium plated bracket guard and railing, 60cm long complete all as specified and directed.

S&F wall mounted Sheet glass corner shelf assembly consisting of acrylic sheet shelf 20cm wide and 30cm long each side with chromium plated bracket guard and railing complete all as specified and directed.

S&F in replacement stainless steel wire cloth 0.36mm dia of wire and average width of aperature 1.40mm and fixed in wooden/steel door/window shutters including new second class hard wood beading of required size to secure the wire cloth/mesh/welding/nut bolt complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality, in squares, including taking down from steel shutter of any description including necessary glass putty and glass pins to secure the glasss complete all as specified and directed.

S&F 4mm thick figured glass, ordinary quality, in squares, including taking down from steel shutter of any description including necessary glass putty and glass pins to secure the glasss complete all as specified and directed.

Material, labour, T & P required for welding on site of steel window/gate or hinges or similar work to steel sections of any description, thickness of weld exceeding 6mm but not exceeding 9mm including taking out of unserviceable material, easing to shutter, grinding, sanding complete to make usable and openable complete all as specified and directed. Note: Materials required shall be paid under supply only item.

Supply only 100mm size medium weight mild steel butt hinges complete all as specified and directed

Supply only box type hinges/projected type for steel window/ventilator or similar description complete all as specified and directed

S&F 125mm long cast type anodised aluminium handle type complete all as specified and directed.

S&F in repairs 125mm long cast type anodised aluminium handle type complete all as specified and directed.

S&F 250mm length of bolt, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece complete all as specified and directed.

S&F in repairs for 250mm length of bolt, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 200mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid one side decorated and other side plain flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F 17mm to 18mm thick Rajshri Celuka ply or equivalent make of one side prelam/rigidlam and other side plain colour fixed with screws, solvent cement/adhesive to make cup board/ cabinet shutters/drawer front/sides, partitions, shelves etc. including 1mm thick PVC lipping/beading fixed with solvet over edges of ply of required width and colour complete all as specified and directed.

S&F sleek soft hydraulic auto closing 3D (Big bend/middle bend/straight arm type) stainless steel finish hinges openable of 0 or 15 degree crank for cup board/ cabinet shutters (sample available in GE Office) complete all as specified and directed. Make: Hettich, Harrison, Earl Bihari

Supplying and laying 15mm bore UPVC pipes of pressure rating 10Kgf per Sqcm including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good including taking down of existing tubing complete all as specified and directed.

Supplying and laying 20mm bore UPVC pipes of pressure rating 10Kgf per Sqcm including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good including taking down of existing tubing complete all as specified and directed.

Supplying and laying 25mm bore UPVC pipes of pressure rating 10Kgf per Sqcm including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of any description and their making good including taking down of existing tubing complete all as specified and directed.

S&F 30mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

S&F 30mm thick second class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed

S&F in repairs toilet paper holder with flat recessed type stainless steel material complete all as specified and directed. Make Jaquar, Cera, Hindware

S&F in repairs vitreous China wash down water closet pan, pedestal pattern white (excluding flushing cistern) including plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including necessary PCC bedding, "P" or "S" PVC trap connected to PVC/CI pipes complete all as specified and directed.

Material and labour for cleaning and removing of all scale and dirt etc., from tanks, and from mouth of circulating pipes etc. including using 50gm of bleaching powder per tank after disconnecting of outlet pipe and re-connecting in the same position, capacity of tank exc. 250 litres but not exc. 500 litres each and marked on tank with white synthetic enamel paint as " tank cleaned on ________" using stencil complete all as specified and directed by Engineer-in-Charge.

Material and labour for cleaning and removing of all scale and dirt etc., from tanks, and from mouth of circulating pipes etc. including using 70gm of bleaching powder per tank after disconnecting of outlet pipe and re-connecting in the same position, capacity of tank exc. 500 litres but not exc. 1000 litres each and marked on tank with white synthetic enamel paint as " tank cleaned on ________" using stencil complete all as specified and directed by Engineer-in-Charge.

S&F PVC water storage cover of 500/1000 liter capacity of any description and shape as per existing water storage tank including necessary locking facility complete all as specified and directed

S&F in repairs 32/40mm dia PVC flexible waste pipe for wash hand basin, kitchen sink, urinal or similar work complete all as specified and directed.

S&F in repairs 32/40mm dia CP finish cast copper alloy waste fitting for wash hand basin, with long screwed shanks and fly nut and flange end, bedded in red lead cement complete all as specified and directed.

S&F in repairs CP finish cast copper alloy waste fitting for stainless steel kitchen sink, as per existing size and designs, with long screwed shanks and fly nut and flange end, bedded in red lead cement complete all as specified and directed.

M&L for pre-cast cement concrete block, (1:3:6), type C1 (using 20mm nominal size, crushed and graded stone aggregate) masonry with solid blocks and setting in cement mortar (1:4) having minimum compressive strength of 50 Kg per Sqcm including demolition of existing masonary work complete all as specified and directed.

M&L for providing and laying cement concrete, 25mm thick, (1:2:4), type B-0, (using 12.5mm nominal size crushed and graded stone aggregate) for levelling/to receive screed for laying floor finish, finished fair and even complete all as specified and directed.

M&L for providing and laying cement concrete, 75mm thick, (1:2:4), type B-1, (using 20mm nominal size crushed and graded stone aggregate) for sub-base of floors & pavings or similar work finished fair and even complete all as specified and directed.

M&L for providing and laying cement concrete, 75mm thick, (1:3:6), type C-1, (using 20mm nominal size crushed and graded stone aggregate) for plinth protection including filling of expansion joint with bituminous mixture finished fair and even complete all as specified and directed.

M&L for providing and laying cement concrete, 75mm thick, (1:4:8), type D-1, (using 20mm nominal size crushed and graded stone aggregate) for sub-base of floors or of similar type of work finished fair and even complete all as specified and directed.

M&L for providing and laying for cement concrete type B-1, 1:2:4 (using 20mm nominal size crushed and graded stone aggregate) as in coping, hold fast or of similar type of work including necessary form work complete in all respectas specified & directed.

M&L for providing and laying sand filling under paver block/floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for providing and laying for 60mm thick rubber mould, machine pressed, precast concrete interlocking paver block, rubber moulded of any shape and size confirming to IS 15658-2006, M-35 Grade of concrete with grey cement and pigment complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles not exc 0.36 sqm in floor, set and jointed in neat cement slury and pointed in white cement with pigment to match the shade of tiles laid over and including cement screed bed or bedding layer of 15mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for coloured glazed ceramic tiles joint less/edge cutted of size exc 0.09 Sqm but not exc 0.18 Sqm, 7mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10mm thick backing/rendering in cement mortar (1:4) complete all as specified and directed.

M&L for joint less/edge cutted glazed/matt finish light/dark shade double charged Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour, set and jointed in neat cement slury laid over and including cement screed bed or bedding layer15mm thick (1:4) complete all as specified and directed.

M&L for joint less/edge cutted glazed/matt finish light/dark shade double charged Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile colour, over and incl 10mm thick plastering in cement mortar 1:4 complete all as specified and directed. Note:- Those tiles fixed right angled to each other the each tile should be chamfered/trim at 45 degrees at joint/corner /edge, the quoted rates are inclusive of this.

M&L for 15mm thick cement plaster in CM 1:6 over walls surface of any description and material, finished even & smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 over walls surface of any description and material, finished even & smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:3 over ceiling surface of any description and material, finished even & smooth without using extra cement complete all as specified and directed.

M&L for two coats of white wash on old decorated ceiling surfaces including necessary filling of voids with wall care putty complete all as specified and directed.

S&F in repairs 25mm nominal bore bore dia CPVC, globe or gate valves, connected with pipe with solvent of any material complete all as specified & directed. Make: Astral, Prince, Finolex

S&F 75mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with necessary clamps complete all as specified and directed.

S&F 75mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F 110mm bore dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with necessary clamps complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) floor trap of outlet dia 75mm, plain with SS gratings 125X125mm size with openable circular grating with or without hole including jointing with solvent cement including fixing to pipe properly with solvent complete all as specified and directed.

S&F PVC (SWR) bends with access door for 75 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) bends with access door for 110 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal size with access door for 75 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal with access door for 110mm bore pipe complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified & directed.

Supply, hoisting and fixing of triple layer, ISI marked, 1000 Litre rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) fixed in position including PTMT 25mm bore ball valve high pressure with epoxy coated aluminium rod and high density plastic ball , two nos new tank nipples of PTMT material 20/25mm bore dia as required including dismantling existing water tank of any type and any capacity complete all as specified and directed.

S&F Aluminium sliding windows shutters powder coated (minimum thickness of powder coating 50 micron) including powder coated main frame, three track (two for glazed and one for wire mesh) without sash bars including necessary jointing cleats, glazing clips, EPDM rubber packing, powder coated aluminium snap beading, screws, wheels, locking arrangments, suitable handles for sliding purpose, 4mm thick plain glass and mesh of dia 0.36mm and 1.40mm width of aperature, silicon chemical filling at gaps between section frame and wall surfaces complete all as specified and directed.

S&F sheet glass, ordinary quality, in squares, pane of 4mm thickness not exc 0.5 Sqm each with solar control film 50micron reflective type sticked to glass pane complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm² , modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed.

S&F stainless steel handles 100mm size, D type dotted for kitchen/cup board cabinet shutters complete all as specified and directed.

S&F drawer ball bearing runners 45mm telescopic channel (20 inch) full extension load capacity 50 Kgs complete all as specified and directed.

S&F mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate of soft closing hydraulic pattern including welding to frame as required complete all as specified and directed.

M&L for preparation of old decorated painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint duly filled the voids with enamel based putty complete all as specified and directed.

M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint duly filled the voids with enamel based putty complete all as specified and directed.

S&F in repairs 25mm dia decorative type stainless steel curtain rods with decorative type end brackets, middle brackets , stops, etc. complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer on walls, pillasters, cornices, etc., on newly plastered surfaces using spunge roller including one coat of primer complete all as specified and directed.

M&L for three coats of white wash on newly plasterd ceiling surfaces including necessary filling of voids with wall care putty complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparing, washing, rubbing down and stopping of distempered surface and complete removal of existing treatment and painted surfaces and applying two coats of oil bound distemper using spunge roller including one coat of primer pillasters, cornices etc, all as specified & directed.

M&L for preparing, washing, rubbing down and complete removal of existing treatment for applying two coats of acrylic emulsion paint of Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including priming coat of exterior primer applied on old decorated surfaces of walls including necessary filling of voids with wall care putty complete all as specified and directed.

S&F GI wire netting 0.90mm dia and 12mm square mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting, waste and cutting in plaster, concrete/stone surafce in patches complete all as specified and directed.

M&L for 50mm bore dia high density polyethylene pipes (HDPE) and fittings of pressure rating 6kgf/cm² fixed complete to walls, ceilings or in floors as drain out pipe etc., including necessary cutting and chasing in wall or floor of any description complete all as specified and directed.

S&F 20mm thick pre-polished (table rubbed and polished) machine cut Granite stone work (of any type & size) in steps(treads), window/door-cills, cooking platforms, wash hand basin counter and like bedded and jointed with grey cement slurry with 20mm thick cement mortar (1:4) including pointing in white cement with pigment to match with shade of granite and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete all as specified and directed.

S&F 20mm thick pre-polished (table rubbed and polished) machine cut Granite stone work (of any type & size) in steps(risers), jambs, pillars, dado/skirting and like laid over cement screed bedded with 15mm thick cement mortar (1:4) and jointed with grey cement slurry including pointing in white cement with pigment to match with shade of granite and cutting for circular holes of any dia for fixing sanitary fittings or of simialr work complete all as specified and directed.

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron/CPVC/PPR pipe and fixed complete all as specified and directed.

S&F in repairs 25mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron/CPVC/PPR pipe and fixed complete all as specified and directed.

M&L for full round and polished moulding (as per main stone polish) to edges of stone slabs upto 20mm thick, such as in window cill, jambs, counters, steps etc. and of other similar situations complete all as specified and directed.

Supply, hoisting and fixing of triple layer, ISI marked, 500 Litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) fixed in position all as specified in SSR Part -I including two nos PTMT/UPVC tank nipple and 25mm bore PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball including dismantling existing water tank of any type and any capacity complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 036mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Gl frame work of size 605mmX605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including takung down existing false ceiling complete all as specified and directed.

S&F calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid exposed metal frame complete all as specified and directed.

S&F 15mm bore dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) chromium plated suitable for 15mm bore pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete as specified and directed.

M/s. N D KALING (BID ID -3320308)

RUDRAYYA I GHANTIMATH (BID ID -3320573)

M/S MAHADEV M PATIL (BID ID -3319613)

Vinod Enterprises (BID ID -3321310)

RAJENDRA KRISHNA SARAF (BID ID -3321266)

M/s B C CHOUGULE (BID ID -3321407)

Peerzada And Sons (BID ID -3321325)