PROVN OF RAIN WATER SHED WITH ASSOCIATED WORKS IN BLDG NO 2 HM AREA OF AGE B/R-1 UNDER GE (EAST) LUCKNOW.

Amount

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 m depth for foundation etc. and getting out in soft/loose soil.

M & L for PCC (1:5:10) type E-2, using 40mm graded stone aggregates as in foundation filling & mass concrete all as specified

M & L 75mm thick PCC (1:4:8) type D-2, using 40mm graded stone agg as in sub base of flooring all as specified.

M & L fly ash Brick work built in CM 1:6 with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius.

M & L for DPC (1:2:4) type B-0 to horizontal or vertical surfaces including necessary form work 40 mm thick

M & L RCC 1:2:4 type B1 using 20 mm graded aggregate for slabs support on walls beams and columns, in floors roofs landings balconies etc.

All as per item 6 here in before but in Chajjas.

All as per item 6 here in before but in lintels, beam etc

M & L form work for soffits and sides of suspended slabs such roof slabs, floor slabs, landing and similar works not exceeding 200 mm thick (horizontal or soffits) rough finished surfaces of concrete flat.

Ditto- but edges of concrete flats n.exc 10 cm wide.

M & L for form work for chajjas including edges

-ditto- as item 11 above but to sides and soffits of beams , lintels etc.

M & L deformed twisted/TMT bars 10 mm dia and over cut to length bent to shape required, including cranking and binding spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or secured with clips.

Ditto all as per item 13 above here in before but 6 to 8 mm dia

Ditto all as per item 13 above but 5 mm dia and over up to including 10 mm dia in stirrups spacers and binders.

M & L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing even and smooth without using extra cement

Ditto all as per item 16 above but 15 mm thick on other than fare faces of brick work in CM 1:6

Ditto all as per item 16 above but 5 mm thick on ceiling in CM 1:3.

M & L hard core of gauge not exceeding 63 mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface with broken bricks bats .

M & L 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate surface finished even and smooth using extra cement as in flooring floor complete all as specified and as directed.

Supply only 3 mm thick and 38 wide glass dividing strip complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in plinth protection and path finished surfaces smooth and even without using extra cement.

M & L Continuous brick edging 75mm wide with brick laid on end vertically with sub class 'B' brick all as specified

M & L preparation of newly plastered surfaces of walls and applying two coats of cement base paint.

All as per item 24 here in before but three coat of white wash in ceiling.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over a coat of primer complete all as specicified.

M & L returning filling including spreading levelling watering and well ramming in layers n exc 25 cm in soft/loose soil.

M & L removing excavated material exc 50 m but n.exc 500 m and depositing where directed at a level n exc 1.5 m above the starting point.

M & L for rendering 20mm thick in CM(1:4) on fair faces of brick/concrete work with WPC and finishing the surfaceeven & smooth without using extra cement.

M&L for roof treatment with polymeric water proofing membrane consisting of following complete all as specified and directed :- (a) Applying bituminous primer conforming to IS 702-1988 @ 1.20 Kgs/ sqm. (b) APP modified bitumenous membrane minium weight 3 kg/sqm and minimum 3 mm thick reinforced with polyester non wove fabric ( wt. not less than 150 gms/sqm) laid on primed surface by heat process, over laps of 100 mm shall be sealed / fused by flame torch application as per manufacturer instructions. (c) Applying two coat of bituminous bases aluminium paint @ 0.2 kgs/sqm over APP membrane.

Supply only integral water proofing compound of approved quality and make confirming to IS.

M & L PCC 1:2:4 for PCC type B-1 using 20 mm graded stone aggregate as in coping steps bed blocks/roof gola etc

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified.

S&F 30 mm thick flush shutters, solid core constructed with block board core and plywood face panels commercial type on both side ISI marked

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified.

S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified.

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified

S&F 300 mm long aluminium alloy anodised sliding door bolts, with hasp staple (Bolt type) and fixing clips ofsheet cast or extruded sections and fixing bolts and slinding bolts of extruded sections or cast - aluminium alloy and fixed complete, all as specified.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

All as per item no 40 but without glazing bars

M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane, complete, all as specified.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples all as specified.

Excavating over areas n.exc 1.5 m deep and getting out in soft and loose soil

M&L 75mm thick cement concrete type C2, 1:3:6 (40mm graded stone aggregate) as in sub-floors, sub-bases, etc.; all as specified

M&L providing and laying 60 mm thick factory made chamfered edge cement concrete paver blcok of M-35 grade with approved colour, design & pattern as in footpath, parks.lawn, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU moud , laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in- Charge.

M & L for concrete bed to drain pipe including packing manhole haunching against the sides of pipe after they are laid and rested in cement concrete 1:3:6 type C2 for 150mm dia pipe

M & L for 150mm salt glazed stone ware drain pipe laid in tranches and jointed as specified.

M & L for pre cast concrete slab in cement concrete (1:2:4) Type B1 set and jointed in cement mortar 1:6.

M&L PCC 1:3:6 type C2 in Surface channel or drains including necessary form works , stops ,moulds etc incl demolition of concrete.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete

S&F of 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall incl PVC holding clamps complete all as directed.

S&F of 110mm bore PVC (SWR) bends,any radius with access door complete all as directed.

M&L for powder coated (min 50 micron) aluminium three track sliding window with extruded profile of top bottom & side track for fixing 5.5mm thick tinted glass fitted with glazing clips and EPDM rubber in two shutters and fixing SS wire mesh in one shutter and powder coated deco grill including roller and handle, maruti locking arrangement complete all as specified and directed by Engr-in-charge. Note:- (a) including 5.5mm thick tinted glass, SS wiremesh, Deco grill etc in this item. (b) Framed section 3 track size = 92x31.75x1.5mm (c) Shutter section size = 40x18x1.55mm Make:- Domal or equivalent as approved by GE

S&F PVC cabinate shutter as in kitchen with frame including shelves in required sizes at site made out of 18mm thick one side decorative lamination and other side balancing lamination sheet and provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets stainless screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirmented as per make and specification mentioned as per drawing and all are specified and directed. Note:- Density of PVC soild sheet should not be less than 575 Kg/cum.

S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, including 15 mm thick screed in CM 1:6 complete all as specified.

All as per above item No. 57 but on vertical surfaces including 10mm thick screed plaser in CM 1:4 and taking down cement plaster /terrazo dado/wall tiling and skirting. etc on brick or stone walls etc complete all as specified. complete all as specified and as directed. Make : Somany/Johnson/Kajariya/Sunheart

M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed in CM 1:4 including cutting, polishing, complete all as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete,

S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete, all as directed.

S&F SS grating 125mm dia with waste hole (Minimium weight 40 grams)

S&F long body 15mm bore bib tap, cast copper alloy, chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. Make: Jaquar/Plumber/Marc

S&F 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling sectin (Not exc 1.2m length) of 0.55 mm thick ness having kurled web of 50mm and flanges of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 3 mm dia gI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long compelte all as specified.

M&L providing and fixing gypsum board 12 mm thick in ceiling fixed with screw as per manufactures instruction

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. Make: JINDAL/ PRAKASH SURYA/ TATA

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

M&L reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts all as specified

M&L reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in footings, foundation beams all as specified

M&L formwork to rough finish surface of flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified.

Ditto as per item No 73 above but to sides of rectangular pillars, posts, columns etc.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall all as specified.

All as per Item No 76 hereinbefore but for One 5 A socket outlet on independent Board all as specified and directed.

All as per Item No 76 hereinbefore but for One 5 A socket outlet on same Board all as specified and directed.

All as per Item No 76 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Supply and fix frame plate with match cover but three module all as specified and directed. Make: Legrand/Anchor Roma/Havells

All as per item No.79 above but eight module all as specified and directed.

Supply and fix terminal box suitable but three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.

All as item No 81. above but eight modular plate of including cutting, grooving and plastering etc. all as specified and directed.

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module all as specified. Make: Legrand/Anchor Roma/Havells

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module all as specified. Make: Legrand/Anchor Roma/Havells

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified. Make: Legrand/Anchor Roma/Havells

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified. Make: Legrand/Anchor Roma/Havells

Supply and fix Modular Regulator 230V AC 50 HZ SP two module all as specified. Make: Legrand/Anchor Roma/Havells

Supply and fix in repair of MCB DB SPN 8 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works all as specified and directed.

Supply and fix MCB SP 230V, 6-32 Amps capacity all as specified and directed. Make:Legrand/Havells/L&T

Supply and fix MCB SPN 230V, 32 to 63 Amp capacity all as specified and directed. Make:Legrand/Havells/L&T

S&F Ceiling rose PVC polycarbonate all as specified and directed.

Supply and fixing of wall/surface mounted LED light 4' feet fittings and fixtures incl 20W tube rod powder coating & with IP20 protection, The luminaire shall meet IP20 rating with surge protection of 2.5KVA, THD ≤10% and PF ≥ 0.95, Make- Philips or Eqv to Havells/Bajaj

Supply and fixing LED building security light of 36W Led Street Light made up of pressure die cast aluminium housing with Polycarbonate cover and unique road optics for better uniformity. The luminaire shall be with higher ingress protection IP66 and impact resistance of IK07. Operating voltage range: 140-270V/50Hz, Lumen efficacy of LED >120Lm/W, CRI≥70, CCT-5700K, & SDCM<5. Powered by built-in potted LED driver gives constant light over wide voltage range. Shall have High Voltage cut-off@325V & safety from 440V (P2P) for 8 hours. Surge protection 4 kV, Power factor ≥0.95, THD ≤10 complete including 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting complete all as specified and directed by the Engr-in-Charge. Make- Philips or Eqv to Havells/Bajaj

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core all as specified and directed by Eng-in-Charge.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed.

Shivam Enterprises (BID ID -3151699)