Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹8.7 L
EMD Value
₹17,480
Closing Date
22 Sept 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Exeutive Engineer REW Kupwara
Exeutive Engineer REW Kupwara
Construction of Health Centre at Dapal
2022_RDPR_188720_22
NIT NO 140 Fresh 2022-23
Open Tender
Civil Works
Item Rate
Exeutive Engineer REW Kupwara
Please refer Tender documents.
2 documents required · 2 mandatory
₹300
Exeutive Engineer REW Kupwara
₹17,480
22 Sept 2022
17 Sept 2022
22 Sept 2022
17 Sept 2022
22 Sept 2022
17 Sept 2022
17 Sept 2022 - 17 Sept 2022
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
P/l of stone soling /RBM including all carriages.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: in 1:4:8
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level) in 1:2:4 using 20mm nominal size aggregate
Providing and Laying of cement concrete 1:3:6 using 40mm nominal size aggregate excluding cost of shuttering etc
Centering and Shuttering etc and removal of formwork for Walls
Walls and attached Pilasters
Brick work with FPS bricks of designation 75 in 1:4 mix
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level TMTbars
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): KD Wood
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Incl. cost of glass panes and panells of 12mm thick. 30mm Thick KD wood
12mm plaster in 1:6 mix
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position, Budloo wood
Providing and fixing of 8mm thick Ply board in ceiling excluding frame work ( which will be Paid separately ).
Providing hoisting and fixing trusses/purlins rafters/posts/ post-plates or like components including cost of screws etc. complete….. 2nd class budloo wood
Providing corrugated Colour Coated High Rib Sheet Roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.5 mm thick
Providing ridges or hips of width 45m overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50mm thick
P/f of Budloo wood cornice 50X50mm
P/f of Hardware Fittings 100MM T-bolts
P/f of Handles 150MM
Aldrop 200mm
Carraige of Sand /Aggregates 20KM
Carriage of bricks 180 KM
CIB & Photos
stage.html
html • 0.01 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .