PROVN OF 04 TRG SHED FOR AGNIVEERS TRG AREA UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Surface dressing n exc 15 cm deep in hard/dense soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard/dense of soil complete all as specified and directed.

Removing excavated material n exc. 100 m and depositing where directed at a level n exc 1.5 mtr above starting point complete all as specified and directed.

M&L for fillingmoorum/red bajri in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, sub base concrete, mass filling etc complete all as specified and directed.

M/L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection, aprons, hard standing, path and like including bitmuminous mastic filling in 1:3 joints (in every 3.00mtr) and finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for heavy duty flooring tiles, harsh weather & UV resistence, high abrasion resistence, MOH Hardness>6, thickness 10 mm thick, area of each tile not less than 0.09 Sqm, anti slip type, laid over and including 15mm thick screed bed in CM 1:6 as in floors, steps, edges, etc set and jointed in neat cement slurry pointed in white or coloured cement to match the shade complete all as specified and directed.

M&L for brick work with sub class 'B' (modular bricks) straight of curved on plan n exc 6m mean radius built in modular bricks in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surface of walls and applying two coats of cement based paint over a coat of wall primer complete all as specified and as directed.

S&F of anodised aluminium powder coated (Minimum thickness of powder coating 50 micron) fabricated works as in doors, windows, ventilators, partitions shutters and frames, with or without sash bar, including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, necessary fittings/accessories etc. complete all as specified and directed. Note: Rates are including for necessary new new fittings for door/window i.e handle, tower bolt, butt hinges, filling of gap between wall and window by silicon gel etc complete. Make :- Hindalco/Jindal/Deco Grill

S&F of 4 mm thick aluminium composite panel sheet for fiixng to doors with aluminium beads complete all as specified and directed.

Excavating in post holes in any type of soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, incl removing of surplus soil to a distance n exc 50 mtr and making good to surface in hard/dense soil complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40 mm stone aggregate) as in posts holes, foundation filling and mass concrete and similar work etc. complete all as specified and directed.

M&L for mild steel work of angle iron, flat iron, plates as in brackets, cleats fasteners, wind ties, supports, base for posts etc of Fe-410-W (Gde E-250) quality -A with riveted, bolted or welded as per site requirement complete all as specified and directed.

M&L for rolled mild steel work as in rafter, purlins, trusses and posts tubular (round/ square/ rectangular shape of pipes as approved) including nuts, bolts, wind ties and gusset plates etc using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St-240 complete all as specified and directed.

M&L for mild steel bolts with diameter of neck exc 20 and n exc 25 mm purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut of appropriate length complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick (AZ-150) of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick (AZ-150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in bed blocks, copings, kneelers, apex stones, bed plates, lintels and the like etc complete all as specified and as directed.

M&L for concealed point wiring with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories (PVC casing and caping of size 25 mm, ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS multi stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly including modular galvanized sunk sheet steel terminal box concealed in wall for fixing of switches, sockets and fan regulators etc complete all as specified and directed for the followings:-

(a) One light /Fan/Exhaust/bell point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps on independent board.

(c) One 3 pin socket outlet on same board.

All as per item No. 25 here-in-before but wiring with 2.5 Sq mm FRLS multi-stranded copper conductor cable for 5/15 amp switch socket on independent board and with 1.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.

S&F of modular switch one way 6 Amp one module, 240 volts complete all as specified and directed.

S&F of modular switch one way 16 Amp one module, 240 volts complete all as specified and directed.

S&F of modular socket outlet 2-in-1, 2/3 pin, 6 Amps, two module, 240 volts, controlled by one switch complete all as specified and directed.

S&F of modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, two module, 240 volts, controlled by one switch complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm dia three terminal complete all as specified and directed.

S&F of white cover plate with frame, 6 module and fixed complete all as specified and directed.

S&F of white cover plate with frame, 8 module and fixed complete all as specified and directed.

S&F of sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 Amps rated busbar 4 way double door, factory made recessed mounting, IP-43, IK-09 with acrylic door complete all as specified and directed.

S&F of MCB single pole, 6 to 32 Amps, 240 Volts and making connections complete all as specified and directed.

S&F of MCB single pole and neutral, 6 to 32 Amps, 240 Volts and making connections complete all as specified and directed.

S&F of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings with and including 10 watt LED bulb cool day light, 230/240V, AC complete all as specified and directed.

S&F of LED tube light fitting bright, 18 watt, slim elegant design in aluminium housing with and including making connection with 3 core 23/0.0076 insulated copper wire from celing rose to fittting complete all as specified and directed.

S&F of 1200 mm sweep ceiling fans (BLDC) complete with blades, down rods and connected accessories, 230 V, Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor complete all as specified and directed.

S&F of LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder with and including making connection with 3 core 23/0.0076 insulated copper wire to fittting complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

M&L for sand filling in trenches with clean dry sand, unwashed including gently pouring around cables for protection complete all as specified. Note:- Conpacted thickness only will measured for payment.

S&L of reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed.

Supply, laying & testing of 1100 Volts grade heavy duty XLPE cable of size 16 Sqmm 4 core, with aluminium conductor stranded polythylene insulated, served with and including sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed including aluminium lugs at the termination ends complete all as specified and directed. Note:- Excavation, earth work, pipe / sand / bricks for cable protection shall be measured and paid for separately under appropriate item.

S&F of LED security light fitting, 35 Watt, 230 V, AC, outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and making necessary connections complete all as specified and directed

S&F of 50mm bore GI tubing, light grade with all fittings as required for passing through cables under the trenches, floors, along with the wall/ pole with suitable size MS flat iron clamps including nuts, bolts etc complete all as specified and directed.

Supply and erecting in position steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (11.00 metres long) and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.

ROYAL CONSTRUCTION (BID ID -3063164)

City buildcom builders & devlopers (BID ID -3064097)

M S MEWALAL UPADHYAY (BID ID -3063587)

M/s VIKAS TRADERS (BID ID -3063887)

RAJPATI CONSTRUCTION (BID ID -3061197)

SUNIL ENTERPRISE (BID ID -3060520)

Vee kay construction (BID ID -3063641)