SPECIAL REPAIRS TO BLDG NO.P-325 AND P-326 (ORs MD ACCN) AT BANA SINGH ENCLAVE IN THE AREA OF AGE B/R-II AND AGE E/M UNDER GE (SOUTH) DELHI CANTT-10

Amount

Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc and brushing and applying neat cement slurry with 3.0 Kg of cement per sq metre, complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors laid over and including 15mm thick screen bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting laid over and including 10mm thick cement plaster in CM 1:4 as in backing etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc laid over and including 15mm thick screen bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L for joint free glazed ceramic coloured tiles in vertical surface 450x350x7 mm thick laid over and including 10mm thick cement plaster in CM 1:4 as in backing set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and as directed.

Dismantling stone slabs and tiles of any discription or thickness in floors, aprons etc, laid bedded and pointed in any mortar, complete all as specified and as directed.

M&L for granite (of any type) work, 20 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms and like in 20mm thick screed bed cement screed bed 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

M&L for Machine cut Kota stone slab flooring 20-25mm thick over 20mm thick cement screed bed laid 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar, laid over cement screed 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar, complete all as specified and directed.

M&L brick work with sub class `B' bricks straight or curved on plan exc. 6mtr mean radius built in cement mortor 1:6, complete all as specified and as directed.

M&L Brick work with sub class 'B' bricks strainght or curved on plan to any radius in half thick in CM 1:4 brick wall built in cement mortor, complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for re-fixing, 15 mm bore of pipe, complete all as specified and as directed.

All as per item no -14- here in before but 20 mm bore of pipe, complete all as specified and as directed.

M&L supplying and fixing of 20 mm bore UPVC pipes SDR 11 & plain CPVC SCH-40 fitting on walls /ceiling or laying in floors including all fitting such as ( brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded adaptor etc) union ,ball valves, flange and tank adaptor complete all specified and as directed.

All as per item no -16- here in before but 25 mm bore of pipe, complete all as specified and as directed.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres, complete all as specified and as directed.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed.

S&F Ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball ascrewed for iron pipe of 20mm bore and fixed, complete all as specified and as directed.

S&F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20/25 mm bore, complete all as specified and as directed.

S&F in repairs PVC connections 450mm long with brass unions at both ends suitable for 15mm bore pipe, complete all as specified and as directed.

S&F in repairs 15 mm Angle valve/Stop valves, cast copper alloy , chromium palted, fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union, complete all as specified and as directed.

S&F in repairs bib tap, brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore, complete all as specified and as directed.

S&F in repairs mixing valve 15 mm dia, CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin for mixing of Hot & Cold water, including fittings, complete all as specified and as directed.

S&F in repairs chromium plated grating with 100mm dia of approved make includingh fixing with 1:4 CM to floor/ nahni trap etc., complete all as specified and as directed.

S&F in repairs grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gms) etc., complete all as specified and as directed.

S&F in repairs brass chromium plated overhead shower rose 125mm dia, with revolving joint and shower rod to fixed to 15mm bore pipe, complete all as specified and as directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass CP, complete all as specified and as directed.

S&F in repairs stainless steel sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and as directed.

S&F Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) , white fixed in repair,including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device, complete all as specified and as directed.

S&F in repairs, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level, complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets, complete all as specified and as directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and as directed.

All as per item no - 37- here in before but exceeding 1.50 sqm and not exc. 4.00 sqm each, complete all as specified and as directed.

Taking down shutter of any descreption exc. 1.00 sqm but not exc. 2.00 sqm each, complete all as specified and as directed.

S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

S&F factory made moulded solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with 19 mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown on drawing as per SSR part-II (2010), complete all as specified and as directed.

S&F factory made moulded solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tube for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying and fixing in the frame at the site as per specification & drawing . on page no 161 of SSR part-II (2010), complete all as specified and as directed.

S&F 35 mm thick Factory made IInd class hardwood plain,framed paneled shutters (any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003 (part) Kiln seasoned and chemically pressure treated, complete all as specified and as directed.

S&F 35 mm thick factory made IInd class hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/ gauge etc. divided into squares edges of framing plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/ gauge etc. size of members of shutters, complete all as specified and as directed.

S&F stainless steel butt hinges, size 100 mm complete, complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts, 150 mm long of extruded section and fixed, complete all as specified and as directed.

S&F aluminium handles, 150 mm size, fabricated type, complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolts of 250 mm long with hasp, staple (bolt type) fixing clips of sheet cast or extruded section, fixing bolts and sliding bolts of extruded section and fixed, complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and as directed.

M&L powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads, complete all as specified and as directed. (Note Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

M&L fabricated side hund openable aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads, complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

M&L 18/19 mm thick pre laminated particle board, interior grade, pre laminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work or by welding to steel frames, including soft wood beading at edges as required, complete all as specified and as directed.

S&F continuous (piano) hinges,mild steel, bright finish or electrogalvanised , width of flap (when open) is 30mm, complete all as specified and as directed.

S&F 150mm long aluminium anodised hasp and staple bolt, brass with mild steel hinge pin 40/50mm dia, cup board knobs fixed with nut, screws and washers of aluminium, anodised, complete all as specified and as directed.

S&F in repair drapery curtain rods, MS pipe with PVC coating 25mm dia of approved quality with decorative wooden finish and two number brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod including 8 Nos (min) match up rings etc., complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165, complete all as specified and as directed.

S&F stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows, complete all as specified and as directed.

M&L for welding in repairs exc 2.5 cm but not exc. 5.0 cm in length thickness of metal be welded exc 6mm but n.exc 9mm, complete all as specified and as directed.

S&F MS chromium plated peg set of five fixing with wall, complete all as specified and as directed.

S&F in repair kitchen plate rack with four shelves made out of stainless steel sheet 1 mm thick overall size 750mm x 750mm x 250mm, complete all as specified and as directed.

S&F in repair aluminium anodised barrel tower bolts, 150 mm long of extruded section and fixed, complete all as specified and as directed.

S&F in repair aluminium handles, 150 mm size, fabricated type, complete all as specified and as directed.

S&F in repair aluminium alloy anodised sliding door bolts of 250 mm long with hasp, staple (bolt type) fixing clips of sheet cast or extruded section, fixing bolts and sliding bolts of extruded section and fixed, complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for rendering 15mm thick rendering with ready mix plaster on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L rendering 10mm thick rendering with ready mix plaster on concrete surfaces of ceiling, chajja,etc finished even and smooth, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying 1 to 2 mm thick wall care putty on whole surfaces including grinding with sand paper and levelling of surface and applying two coat of oil bound distemper on white or tinted over existing prepared putty base surface, complete all as specified and as directed.

M&L for preparation of newly plasered surfaces of walls and applying two coat of cement based paint, complete all as specified and as directed.

M&L for preparation of newly plasered surfaces of ceiling and applying three coat of white wash, complete all as specified and as directed.

M&L for complete removal of existing treatment from internal surfaces of wall by electrically operated grinder, washing and filling of holes with filler material and applying 1 to 2 mm thick wall care putty in two layers on whole wall surface including grinding with sand paper and levelling the surface and than applying two coat of oil bound distemper on white or tinted surface over existing prepared putty based surface, complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying two coats of white wash, complete all as specified and as directed.

M&L for preparation of old surface of ceiling and applying one coats of white wash, complete all as specified and as directed.

M&L for complete removal of existing treatment from external surfaces of wall by electrically operated grinder thereafter filling of holes and cracks with filler material and than applying two coat of cement based paint over a coat of cement primer, complete all as specified and as directed.

Cutting of vegetation/scrubs plant (girth not exceeding 300mm) from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC 1:2:4 type B1 with surfaces finished to match complete including scaffolding etc, complete all as specified and as directed.

Demolition of mud in roof, any thickness, including plastering and leeping (whether full thickness removed or only a part there of) complete all as specified and as directed.

M&L for Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:-

(a) Applying oil bound bituminous primer at the rate of 0.30 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated.

(b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35).

(c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, (weight not less than 160 gm/Sqm) with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface.

Note:- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectiveness of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or in lieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.

M&L for PCC 1:2:4, type B-0, using 12.5mm gradded aggregate to maintain slope as in roof padding alongwith liquid water proffing compound.

M&L for cement concrete type B1 - 1:2:4 (using 20mm graded stone aggregate) in roof kerbs or mud stop rounded or chamfered on edge etc., complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and as directed.

S&F 110 mm dia Cast iron pipes Type 'B', single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and as directed.

S&F 75 mm dia Cast iron pipes Type 'B', single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and as directed.

S&F 75mm Cast iron bends type ‘B’ (any radius), complete all as specified and as directed.

S&F 100mm Cast iron bends type ‘B’ (any radius), complete all as specified and as directed.

S&F in repairs Cast iron floor/ nahani trap including jointing with solvent cement, dia of outlet 75mm, complete all as specified and as directed.

S&F for 75mm Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and as directed.

M&L in repair for 75mm Cast iron Nahani trap/floor trap with grating including jointing of waste pipe and fixed in cement concrete type B-1, 1:2:4, complete all as specified and as directed.

S&F in repairs 125mm x 100mm salt glazed stone ware gully traps square & round mouthered trap 'P' including case iron grating and fixed, including necessary excavation and earthwork, concrete in bed, surrounds, kerbs etc., and jointing to drains in CM 1:1, complete all as specified and as directed.

Taking down rain water pipe (any size) or pattern incl all fittings, head shoes, bends swan necks etc incl cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories, complete all as specified and as directed.

S&F PVC (SWR) pipes, 110 mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F PVC (SWR) bends/ Tee any radius, 110 mm bore, complete all as specified and as directed.

S&F holder bat clamps 100mm bore out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight, complete all as specified and as directed.

M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through concealed PVC conduit and factory painted with stove enameled black paint with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer with all accessories including 1.5 sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for exhuast fan in bathroom/washroom controlled by one switch 5 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) and making good to disturbed surface of walls including necessary touch up with through adjoining surface of disturbed area i.e with OBD/colour work/white wash as existing finishes complete all as specified and directed by Engr-in-Charge. Note :- New conduit will be added where there is a blockage/damage to the existing conduit including bends/elbows/tees/Junction boxes.

S&F Exhaust Fan, PVC body, copper wound 250 mm Sweep complete including louver and connecting up with cable T/C flexible cable of size:- 1.50 Sqmm from ceiling rose / connection to fan all as specified and directed.

M&L for opening of hole through out the wall as suitable for exhuast fan size 250 mm sweep and fixing of nuts bolts with 4" anchor fastner of suitable size and making good to disturbed surface and all sa per site requirement complete all as specified and directed by Engr-In -charge Noted : The quoted rates are inclusive for making hole opening civil work with MS fastner clamps strip 38mm wide and 5mm thick(min) to hold exhaust fan.

S&F in repairs switch piano flush type 5/6 Amps SP one way all as specified.

S&F in repairs switch piano flush type 5/6 Amps SP 2 way all as specified.

S&F in repairs socket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose all as specified.

S&F in repairs switch piano type 15/16 Amps SP one way all as specified.

S&F in repairs universal socket outlet 2-in-1 (multipurpose) 5pin 6/16 Amps flush mounted type all as specified.

S&F in repairs bell push, flush type 5/6 Amps all as specified and directed. Note : All for item 100 to 108 here-in-above FRP sheet for switch board of suitable size including cutting work shall be provided by the contractor without any extra cost.

S&F in repairs ceiling rose surface Bakelite 65x25 mm two to three terminals.

S&F in repairs of Decorative wall light fixture made up of Polycarbonate, including rechargeable bulb of 12 Watt and connected with flexible cable 2 core copper conductor 0.50Sqmm complete all as specified.

S&F in repairs Surface mounting round shaped LED downlighter with durable housing with Al heat shrink with diffuser to give glare free light 6 Watt LED 6000K/6500K lamp type in replacement of old unsv existing light fitting any type from ceiling of stairs/common areas, complete all as directed.

S&F in repairs Wall mounted LED Integrated Batten 20 Watt - 4Ft White, indoor decorative PVC extruded LED battern-Integrated type in replacement of old unsv existing 36/40 Watt FTL/LED fittings any type, complete.

Taking down Wall mounted LED Integrated Batten 20 Watt - 4Ft , and refixing the same after completion of B/R work like plaster and finishes etc complte including necessary connections of incoming and out going cables. as specified and as directed.

S&F in repairs Wall mounted LED Integrated Batten 12 Watt-2 Ft White, indoor decorative PVC extruded LED battern -integrated type. in replacement of old unsv existing 18/14 Watt FTL fittings any type, complete.

S&F in replacement 10 LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE in replacement of old unsv bulk head/Sketch/LF fitting including all accessories connecting up twin core flexible copper conductor cable complete all as directed.

S&F of electric bell Ding Dong type AC, 230 volts single phase all as specified.

S&F BLDC (Brushless Direct Current) Ceiling Fan 1200 mm Sweep with remote & Suitable Cell , not less than 350 RPM having air delivery 215Cum, high air flow with silence operation, with fully copper winded motor & ribbed 3 Nos A/M blades with remote control. The BLDC motor fan shall have 100% rust free blades. The fan shall be BEE 5 Star rating and compliant with IS 374 and making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed by Engr in charge including taking down old ceiling fan and depositing to MES store yard.

S&F Exhaust Fan, Metal body, copper wound 300 mm Sweep, with metal louver & including taking down of old exhasut fan and depositing to MES store yard and connecting up with replacement of cable T/C flexible cable of size:- 1.50 Sqmm from ceiling rose / connection to fan all as specified and directed.

S&F Hot Water Storage (Geyser) 25 Ltrs Capacity, BEE 5 Star Rated, ISI Mark, metal body including taking down of old geyser and depositing to MES store yard and connecting up the geyser with replacement of cable three core cable of size 2.5 Sqmm by means of metal clad socket complete with MCB SP 20 Amps all as specified and directed.

S&F in repairs of sheet metal enclosures double door for DBs when MCBs to be used SPN-8 Way, 240V with 200 Amp rated busbar complete as per site requirement and as directed.

S&F in repairs 415V 10KA 'B' curve miniature circuit breaker TPN 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning.

S&F in repairs MCB SPN 40Amps 'B' series, breaking capacity 10 Ka, 'B' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc

S&F in repairs MCB SPN 32 Amps 'B' series, breaking capacity 10 Ka, 'B' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc.

S&F in repairs MCB SP 6 to 32 Amps 240 Volts, 10kA, `B' curve all as per site requirement and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to GI wire 4 mm as earthing lead by means of nut, bolts and check nuts and washers, GI light grade protection pipe 15 mm dia upto 7.5 M, GI watering pipe 20 mm dia medium grade, RCC cover with funnel, excavation in any type of soil, PCC pit charcoal, salt all as shown in electrical plate No 5 of SSR Part I, including earth test point upto panel board, all as specified or indicated including testing on completion.

Taking down and refixing single static energy meter and including its connection complete and mounting on existing surface including necessary connections of incoming and outgoing cables as specified and as directed.

M&L for removing the old paint from the LT Panel,Meter Box, Busbar below the structure of the block by old paint and painting with spray gun with two coats of primer and one coat of existing grey weather proof paint including disconection of electrical connection of LT cable complete all as specified and directed. Note : Marking of danger notice board with skull and bones from the conductor and marking of qtr No on meter is deemed to be included in the rates quoted.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

R.P Builders (BID ID -3074146)

R C Sharma and Co (BID ID -3066542)

M R INTERIOR HUB (BID ID -3065900)

PD SHARMA AND SONS (BID ID -3078861)

M/S GOPAL JEE SINGH (BID ID -3066656)

HANUMAN BUILDERS (BID ID -3065825)

P R Constructions (BID ID -3065806)

M/S Parmod Johar (BID ID -3071919)

Joshi Constructions (BID ID -3065619)