Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.5 LAccepted-AOC NEW JAIL ROAD UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹38.1 L+₹3.6 L (10.6%)Rejected-Finance HOUSE NO 93 WARD NO 8 NEAR ISKON TEMPLE UDHAMPUR J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹38.6 L+₹4.1 L (11.9%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹38.6 L+₹4.2 L (12.0%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹39.3 L+₹4.8 L (13.9%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
10 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Sachin Sharma CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
PROVN OF ROAD AT EW BN UNDER GE (SOUTH) UDHAMPUR
2022_MES_564669_1
CWE/U(S)-75/2022-23
Open Tender
Civil Works
Item Rate
180 days
UDHAMPUR
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) UDHAMPUR
₹77,000
Yes
23 Dec 2022
22 Nov 2022
12 Dec 2022
22 Nov 2022
10 Dec 2022
5 Dec 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in- charge
Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in foundation, filling and mass concrete, complete all as specified and as directed by Engr-in-Charge.
Walling of random rubble stone masonry uncoursed, with best quality locally available harder stones such as granite, trap, basalt, trap, basalt stone etc, well bonded, bedded and solidly hearted , built in cement mortar 1:6 complete all as specified and as directed.
Pre-cast plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregates) as in bond stones and in similar works set in cement mortar 1:6, including necessary form works, complete all as specified and directed by Engr-in-Charge.
Raised pointing to Random or polygonal Rubble stone coursed or uncoursed Masonary in Cement Mortar 1:3 complete all as specified and as directed by Engr-in-Charge.
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses of granite or trap stone etc. and hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 20 mm complete all as specified and as directed by Engr-in-Charge.
Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level , complete all as specified and as directed by Engr-in-Charge.
Providing cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles including necessary formwork complete all as directed and specified by Engr-in-Charge.
110mm bore, PVC (SWR) pipes, low density of pressure rating 10 kg/sqcm, single or double socketed, in any length with rubber ring joints, fixed to wall as weep holes as in retaining wall, complete all as specified and as directed by Engr-in- Charge.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base, complete all as specified and as directed by Engr-in-Charge.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., exc. 1.5 m and n exc. 3.0 m high from base, complete all as specified and as directed by Engr-in-Charge.
Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil,complete all as specified and as directed by Engr-in-Charge.
Removing excavated material exc. 250m and depositing where directed at a level n exc. 500 m above the starting point, complete all as specified and as directed by Engr-in-Charge.
RCC M-25 (design mix), using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beam; plinth beams; bases of columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed by Engr-in-Charge. Note: Design/Sectional detail of RCC structure shall be decided by Engr-in-Charge as per ground requirement.
RCC M-25 (design mix), using 20 mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified and as directed by Engr-in-Charge. Note: Design/Sectional detail of RCC structure shall be decided by Engr-in-Charge as per ground requirement.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, to obtain rough finished flat surfaces of concrete complete all as specified and as directed.
Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions etc, square, ractangular or polygonal, to obtain rough finished flat surface of concrete complete all as specified and as directed.
10mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finish surfaces even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.
TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed by Engr-in-Charge.
TMT mild steel bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and includingMS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed by Engr-in-Charge.
Preparing newly plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed by Engr-in-Charge.
Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, conforming to Fe 410-W (Gde-E- 250) quality-A, complete all as specified and as directed by Engr-in-Charge.
Preparation of new steel surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/zink chrome primer complete, complete all as specified and as directed by Engr-in-Charge.
Plain cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in drain or surface channels including weathering, slightly rounded or chamfered angles and throating including necessary form works and extra forming fair finished surfaces of drain or channels for inner girth in cement concrete etc complete all as specified by Engr-in-Charge.
15 mm thick rendering on other than fair faces of brick /concrete on wall including in cement mortar 1:4 and finish even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.
Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed by Engr-in-Charge.
Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified.
Rolling and consolidating formation surfaces in cutting to required camber and gradient with 8 to 12 tonne power roller, complete all as specified and as directed by the Engr-in-Charge.
Soling (or sub base), 150 mm thick (spread thickness), with broken boulders or quarried stone (granite/ basalt) including filling of interstices, surface formed and rolled and consolidated to required gradient and camber with power roller of capacity 8 to 12 tonne, complete all as specified and directed by Engineer-in-Charge.
150mm thick (Compacted thickness) WBM in two layers 75mm each layer with coarse aggregates of grading 2 (63 to 40mm size) of granite, trap or basalt spreading and compaction with 8 to 12 tonne power roller and consolidated to required gradient and camber complete all as specified and directed.
Preparing un-surfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., and applying evenly a priming / tack coat on un-surfaced water bound macadam surfaces with paving bitumen primer using bitumen VG-10 paving grade ( 80 -100 penetration) @ 10 Kg per Ten Square Metre with tar boiler and including Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed by the Engineer-in-Charge.
Providing, pre-cast cement concrete 1:2:4 type B-I (20mm graded) as in kerb stones and in similar works bedded and jointed in cement morter 1:6, complete all as specified and as directed by Engr-in-Charge. (Size : to be approved by Engr-in-Charge)
M & L for providing and applying 1-2 mm thick road marking paint ( retro reflective ) of specified shade / colour etc, either continuous or broken lines over existing or new painting surface of cement or bituminous surface by using thermoplastic material " Brand " - Road King or equivalent brand approved by MORTH , IRTC including supply of paint material at the rate of 5 kg / sqm & glass beads at the rate 0.30 kg / sqm ( Reflactive Index 1.5 ) by using semi automatic thermoplastic paint applicator machine fitted with profile shoe , glass beads dispenser, propane tank heater and profile shoe heater , driven by experienced operator on road surface including cost of material , labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engr - in - Charge and accordance with applicable specification. Note Retro reflective paint shall be applied as per manufacturers instructions along with most technology and speciality complete .
Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PMMA striplens reflector of model No. DA-972 fixed with and incl MS stud of suitable size as per manufactures instructions., complete all as specified and directed.
Surface dressing not exceeding 15 cm deep a and getting out in any type of soil in road side berms including all necessary cutting/ filling and finish to require level complete, all as specified and as directed by the Engr-in-Charge.
75mm thick Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed by Engineer-in-Charge.
Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, and for laying of cable or pipes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed by Engr-in-Charge.
600mm bore reinforced concrete pipes, class NP2 with collars laid in trenches and jointed, complete all as specified and as directed by Engr-in-Charge.
Dark eye solar studs RED,Amber or white of size 100 x 100 x 21, height without stump - 21mm, height with stump 55mm, stump dia 33mm, LEDs electronically operated with 4 Nos solar cell, Battery - 1600MA/1.2 volts Ni-Mh mono-crystalline 2.4v/0.3 watt, aluminium reflective frame- ploycarbonate weight of stud 360 gms fixing in repairs, complete all as specified and as directed by Engr-in-Charge.
khajuria builders
RAJ MOHD
JINDAL BUILDERS
RAMAN KUMAR
M/s Rukmani Construction Company
RAMAN CONSTRUCTION CO
vmd traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .