PROVN OF FOL DUMP WITH OVERHEAD SHED AT 21 FD WKSP EME AND FORAGE STORE AT 32 MVH RAIN WATER HARVESTING WITH DRAINAGE AT 416 ENGR BDE CAMP UNDER AGE BR II AGE EM I OF GE NORTH MEERUT CANTT

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in hard / dense soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

All as per Srl item No 02 here-in-before but portion exc 1.5m and n. exc 3 m deep.

All as per Srl item No 02 here-in-before but portion exc 3.0m and n. exc 4.5 m deep.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick each complete all as specified and directed.

M&L for sand (washed river) filling under floors or in paving n.exc 15 cm thick including watering and consolidation complete all as specified and directed.

Removing excavated material (spoil) exceeding 50 m not exc 100 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

Removing excavated material (spoil) exceeding 250 m not exc 500 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

M&L for loose filling with broken brick bats of gauge 40mm to 80mm as in rain water harvesting deposited, spread complete all as specified and directed.

M&L for loose filling with broken stone or boulders / aggreagate of gauge n.exc 63mm as in rain water harvesting deposited, spread complete all as specified and directed.

M&L for coarse sand filling in rain water harvesting deposited, spread complete all as specified and directed.

M&L laying for hardcore of broken stone or boulders of gauge n exc 63 mm, deposited spreaded, levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates), in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing Cement concrete 1:2:4 Type B-1 (using 40 mm graded crushed stone aggregates) in suface channels and drains including necessary form work, stops, moulds etc complete all as specified and directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded stone aggrigate) as in manhole covers, cover slab, chullah hoods, chajjas, water troughs, shelves or similar works set & jointed in CM 1:4 complete all as specified and directed.

M&L for providing cement concrete 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregates) in copings, kerbs, bed plates, hold fast and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

-----------------BLANK-----------------

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves and the like complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates)as in beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates)as in columns, pillars, piers, posts and struts complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:3 complete all as specified and directed.

M&L for brick flooring with sub class B bricks old size laid on edge laid dry and pointed in CM 1:3 over and including 25mm thick layer of sand and filling the joints with sand complete all as specified and directed.

M&L for providing 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4 Type B 0 (using 12.5mm graded crushed stone aggregates) and mixed with water proofing compound as per manufacturers instructions complete all as specified and directed. Note :- Water proofing compound will be measured & paid separetly as supply only.

Supply only Integral water proofing compound (I.S.I marked on packing)complete all as specified and directed.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exc 200mm thick; rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, exc 1.5m clear span cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, and columns rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing form work rough finished surfaces to edges of concrete flats, brick in floor cills, railing treads, breaks in floors, window cills, chajja, opening in concrete walls, floor and roofs n.exc 20cm wide and sides of RCC / PCC bands in walls, horizon tal or sloping and similar work etc & similar works exc 10 cm but n.exc 20cm wide complete all as specified and directed.

Supplied and fixed steel windows with pressed steel frame made out from 1.25 mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges, peg stay , handles tower bolts lugs including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonry work complete all as specified and shown on drawings

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F 1.60 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including, round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required. complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 37 here-in-before but 6mm to 8mm dia.

All as per Srl item No 37 here-in-before but 5mm dia and over up to and including 10mm diaas in stirrups, spacers / binders.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F steel windows or ventilators, fixed type, with glazing bar and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work complete all as specified and directed.

M&L for 200mm dia boring in any type of soil strata including hard stone / boulder up to 120 feet depth for inserting 200mm UPVC sloted / preforated pipe from G.L to 120 feet and caping the same at ground level complete all as specified and directed. Note : Supply only 200 UPVC perforated pipe shall be measured and paid under saperate item.

Supply only 200mm dia UPVC perforated pipe including sockets complete all as specified and directed

M&L for preparing ,cleaning new concrete/plastered surface providing 20mm thick bedding layer of cement mortar 1:4 mixed with water proofing compound and applying evenly a tack coat @1.20 kg/Sqm with 85/25 industrial bitumen over a coat of bitumen primer @ 0.30 liter/Sqm and laid with 3mm thick APP modified polymeric water proofing membrance with non-woven polyester rainforced and applying a tack coat of 85/25 industrial bitumen @ 1.2 kg per Sqm and finish the surface with aluminium paint at top @ 0.2 kg/Sqm as per manufacturer's instructions. Weight of membrane shall not be less than 3.6 kg/Sqm unrolled and bonded to substrate with side and end laps 75mm & 100mm as per manufacturer's instructions. complete all as specified and directed. Note :- The WPT work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical representative.

M&L for laying 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for 50mm thick PCC (1:2:4) type B1, (using 20 mm graded crushed stone aggregates) finish cement concrete surface even and smooth with using extra cement as in floors complete all as specified and directed

M&L for 100mm thick PCC (1:2:4) type B2, (using 40 mm graded crushed stone aggregates) as in floors/paving finish cement concrete surface even and smooth without using extra cement, with making XPM impression of expanded metal while the concrete is green complete all as specified and directed

M&L for 100 mm thick PCC (1:2:4) type B2, (using 40 mm graded crushed stone aggregates) as in floors/paving finish cement concrete surface even and smooth without using extra cement complete all as specified and directed

Supplied and fixed glass dividing strip 3mm thick and 38mm wide inserted in position to confirm the design in flooring wide all as specified and directed

M&L for laying 80 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-40 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : NITCO, Mumbai; Redsun tiles & Pavers, panchkula ; Star Tiles & Industries, Rama Devi, Kanpur ; Mayur tiles & Interlocking Pavers, Lucknow ; Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished fair and even without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling, soffits of slab, chajja and roof projection or concrete surface, finished even and smooth complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white lime washing on walls complete all as specified and direcrted.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing the newly plastered surfaces and applying two coats of cement base paint on walls / vertical surfaces over and including a coat of primer on plastered surface of wall complete all as specified and direcrted.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for concrete bed in PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) to drain pipe after they are laid and tested for 450 mm bore of pipe complete all as specified and directed.

S&F Reinforced concrete drain pipes, 450 mm bore class NP2, laid and jointed in cement mortor (1:1) complete with collars complete all as specified and directed.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, Fire Retardant, conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunken zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing for (a) One light/fan/bell point wiring controlled by one, one way switch/bell push button. complete all as specified and directed.

All as per Srl item No 66 here-in-before but using 2.5 sqmm copper conductor for with 2.5 sqmm earth wire for one 3 pin, 15/16 amps socket outlet on independent controlled by one - one way switch complete all as specified and directed.

M&L for Switch piano 5A / 6A, flush type 240 volt ISI marked all as specified.

M&L for Switch Socket combination outlet 2 in 1, 5A / 16A, 5 in 1 flush type 240 volt ISI marked all as specified.

S&F Ceiling rose surface Bakelite 65x50mm, 3 terminals, AC, 240V, ISI Marked all as specified.

S&F integrated LED tube light fitting surface mounting, Poly carbonate batten, 4', 240V, T5, 20 Watt and connecting up with flexible copper cable of size 0.75 sq mm 3 core from celing rose to the light fitting complete all as specified & directed.

S&F lamp holder, PVC / Polycarbonate type with batten back plate, AC, 240V, Pin type, ISI marked all as specified.

M&L for MCB DB double door type SPN 4 way sheet steel powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and directed

S&F MCB SPN 40 A, AC, 240V, 10KA ISI Marked complete all as specified and directed

S&F MCB SP 6 to 32 A, AC, 240V, 10KA ISI Marked complete all as specified and directed

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with TMT bar 8mm dia at the rate of 150mm center to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, for pit cover including testing on completion complete all as directed. (Note : Main earth lead beyond 7.5 metre measured and paid for separately).

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade laid in trenches / fixed on wall / pole of cross sectional area of cable 6 Sqmm, 2 core complete all as specified and directed. Note : Excavation, earth work, sand cushioning, cable covers and cable protection pipe will be measured and paid saperately in respective items.

M&L for Galvanized steel tubing, light grade, with all fittings of size 40 mm dia for protection of cable complete all as specified and directed.

M&L for security light fitting 1 x 25 LED type, drawn through and including GI bracket of size 25mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 2 Nos and necessary nuts, bolts, washer as required complete all as specified and directed

M & L spreading and levelling of soil in layers n exc 25 cm thick and well ramming including watering as required in floors complete all as specified and directed.

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable / cable duct. (Only punned thickness shall be measured for payment purpose) complete all as specified and directed

M&L for laying fly ash old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over under ground cable for protection complete all as specified and directed.

Arun Construction Co.

M/S AMAR ELEKTRO CENTRE

Manglam Engineers and Construction Co

NK CONSTRUCTION

Anil Kumar Gupta