Construction of 2 Additional Class Room at MS Draman District Ramban Under (CSS) Samagra 2025-26

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Executive Engineer PWD (R&B) Division Ramban

Name of Work:- : Construction of 2 Additional Class Room at MS Draman District Ramban Under (CSS) Samagra 2025-26

Contract No: of 2025-26 Advertised Cost Rs.20.84 Lacs

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed All kinds of soil Cum Excess(+) Full Conversion INR

2 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Cum Excess(+) Full Conversion INR

3 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 with 20% boulder (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) Cum Excess(+) Full Conversion INR

4 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size Cum Excess(+) Full Conversion INR

5 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Cum Excess(+) Full Conversion INR

6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars Kg Excess(+) Full Conversion INR

7 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns Sqm Excess(+) Full Conversion INR

8 Centering and shuttering including strutting, propping etc. and removal of form work forSuspended floors, roofs, landings, balconies and access platforms Sqm Excess(+) Full Conversion INR

9 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) Cum Excess(+) Full Conversion INR

10 Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level Cum Excess(+) Full Conversion INR

11 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood Cum Excess(+) Full Conversion INR

12 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded Kg Excess(+) Full Conversion INR

13 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 Sqm Excess(+) Full Conversion INR

14 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 Mtr Excess(+) Full Conversion INR

15 Providing and fixing plained eaves boarding 2nd class kail wood 250x32 mm (nominal size) Mtr Excess(+) Full Conversion INR

16 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 coarse sand) Sqm Excess(+) Full Conversion INR

17 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) Sqm Excess(+) Full Conversion INR

18 Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class kail wood Sqm Excess(+) Full Conversion INR

19 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class Kail wood Sqm Excess(+) Full Conversion INR

20 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 50 x 12 mm Mtr Excess(+) Full Conversion INR

21 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) Sqm Excess(+) Full Conversion INR

22 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work Sqm Excess(+) Full Conversion INR

23 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Each Excess(+) Full Conversion INR

24 Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm Each Excess(+) Full Conversion INR

25 Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm Each Excess(+) Full Conversion INR

26 Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10 mm Each Excess(+) Full Conversion INR

27 Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm Each Excess(+) Full Conversion INR

28 Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete 100 mm Each Excess(+) Full Conversion INR

29 Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper Each Excess(+) Full Conversion INR

30 White washing with lime to give an even shade on New Work (three or more coats) Sqm Excess(+) Full Conversion INR

31 Providing and fixing hard board sheet ceiling of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 4.5 mm Sqm Excess(+) Full Conversion INR

32 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood Cum Excess(+) Full Conversion INR

33 Electric wiring with 1.5 sqmm copper cable including 20 mm dia 2 mm thick PVC pipe 5 amp with sunken box and connection to the main pole complete as directed by engineer-incharge point Excess(+) Full Conversion INR

34 Carriage of Sand from Source to site of work by Mechanical transport including loading /Unloading complete for an avg dince of 150 km by MT & 500 mtr by H/L Cum Excess(+) Full Conversion INR

35 Carriage of Stone aggregate below 40 mm from Source to site of work by Mechanical transport including loading /Unloading completefor an avg. distance of for an avg dince of 50 km by MT & 500 mtr by H/L Cum Excess(+) Full Conversion INR

36 Carriage of Brick from Source to site of work by Mechanical transport including loading /Unloading complete for an avg. distance of 150 km by MT & 500 mtr by H/L No Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information