C/O SWM unit at Chanpal ward no. 3

Amount

Earth work in bulk excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge,All kinds of soil

P/L of quarry stone soling hand packed including ramming, watering & filling of interstices all costs and carriages involvedCOMPLETE

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) including all carriages costs of material involved

Brick work with common burnt clay (nom-modular)bricks of class designation 7.5 in super-structure above plinth level upto V floor incl. curingfoundation and plinth in cement mortar (1:6) mix ratio (1:cement 6:coarse sand) including extra cost of brick work for superstructure and all costs carr and headloads of materials involved complete

upplying and filling RBM under rooms including compaction by ramming, watering etc all carriages complete

6 mm cement plaster of mix 1 : 3 (1 cement : 3 fine sand)

ement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 40mm thick with 20 mm nominal size stone aggregate.

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete,Welded.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge

ainting with synthetic enamel paint of approved brand and manufacture to give an even shade,two or more coats on new work

inishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing corrugated G. S. sheet roofing high rib profile colour coated including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete, 50 mm thick with zinc coating not less than 275 gram/m

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required, In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete

Providing , installation and fabrication of sign Board 3'x2' ( 2MM) M.S sheet mounted on Angle Iron frame 50 x50 x6 mm 5 feet height embeded in cement concrete 1:2:4

JAWAID AHMAD MIR

MOHD SADIQ HAKLA