PROVN OF RETAINING WALL FROM OFFICE COMPLEX TO MT AREA OF HQ SIG GP CAMP ADDN ALTN AND REPAIRS TO LIVING ROOM AND TOILET BLOCKS AT BLDG NO NP120 NP121 AND NP122 TOILET BLOCKS WASHING AREA AND JCOs ORs LIVING ACCN AT BLDG NO P22 AND T191AND CERTAIN

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises complete all as secified and directed.

Screed bed or bedding layers of 15 mm thick cement mortar 1:6 for laying floor finishes complete all as specified and directed.

Screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 laying floor finishes complete all as secified and directed.

15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces for backing coat for tiles complete all as secified and directed.

Dismantling of kota stone in slab any desctription or thickness as in flooring laid bedded and pointed in any mortar complete all as secified and directed.

Non skid ceramic tiles of area exceeding 0.18 sqm and not exceeding 0.38 sqm in floor etc. coloured tiles on set and jointed in neat cement slurry and pointed in white cement mixed with colour pigments to match the existing surface complete all as specified and directed.

Non-skid light coloured, white printed tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm and 7 mm thick as in floors etc set and jointed in neat cement slurry pointed in white or coloured cement to match complete all as specified and directed.

Glazed ceramic tiles of size 300 mm x 200 mm x 7 mm thick coloured tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white cement mixed with colour pigments to match the existing surface complete all as specified and directed.

Dura stone tiles of size 305 mm x 305 mm x 10 mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tiles complete all as specified and directed. Note : Shade/colour as approved by GE.

Machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabe including rubbing and mirror polishing complete all as specified and directed.

Dismantling AC Corrugated sheet as in roof covering including rideg complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and directed.

Demolition cement concrete in ground floors and paving (unreinforced) not exceeding 15 cm thickness (below or above ground floor) complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick crimpted/tapard at the external end of any colour having tensile strength 550 Mpa as in roof covering fixed with self tapping screws and caps etc complete all as specified and directed.

Plain galvalume aluminium zinc coating GI based plain steel sheet 0.63 mm thick in ridges, hips, valley gutters at the external end slop of any colour having tansile strength 550 Mpa as in roof (ridges) covering fixed with self tapping screws and caps etc complete all as specified and directed.

4 mm thick AC board (designer ceiling) of size 600 mm x 600 mm panel confirming to IS 14862 type B category three including GI frame work with size of grid 605 mm x 605 mm for seanless ceiling comprises of GI perimeter including all accessories complete all as specified and directed.

75 mm thick plain cement concrete, type C-2, (1:3:6) using 40 mm graded aggregate as in plinth protection complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

Hard core of broken stone or boulders of gauge not exceeding 63 mm and deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Providing 100 mm thick, plain cement concrete type B-2, (1:2:4) (using 20 mm graded aggregate) as in sub base of floors complete all as specified and directed.

Applying one coat birla wall care putty on old plastered wall surfaces including preparation of surface by brooming down or steel wire brushing, scrapping down vegetation growth, efflorscent salts and trading oil and greasy spot complete all as specified and directed.

Preparation of old surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer including complete all as specified and directed.

Preparation of old plastered surfaces and applying one coat of cement based paint including complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking of shutter off shutters from frame) exc 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking of shutter off shutters from frame) not exceeding 1.5 Sqm each complete all as specified and directed.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet/wood grain printed PVC sheet reinforced with MS Tube complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

100 mm long stainless steel butt hinges for PVC for PVC door complete all as specified and directed.

Aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

Aluminium handles cast type anodised 125 mm long complete all as specified and directed.

Powder coated Aluminium frames for doors, windows, ventilators with one or more rebates and aluminium window and ventilator shuttter frames jointing cleats for fixing etc complete all as specified and directed thickness of powder coating not less than 50 micron complete all as specified and directed.

Taking up or down of 15 mm bore pipes steel tubing and connections complete all as specified and directed.

Vitreous china wash basin, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, flush pipe, cutting for and pinning in ends of bracket fixed in repairs complete all as specified and directed.

WC Orissa pattern size 580 x 440 mm white with integral foot rest excluding flushing system including P or S trap as fixed in repair complete all as specified and directed. Make : Hindware/Parryware/Cera

15 mm bore pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule fixed in repair complete all as specified and directed.

15 mm bore bib taps, long body with wall flange with arreator fency type chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule fixed in repair complete all as specified and directed.

15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer fixed in repair complete all as specified and directed.

32 mm dia PVC waste pipe high density fixed in repair complete all as specified and directed.

PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement fixed in repair complete all as specified and directed.

75 mm dia PVC (SWR) floor trap plain, with grating including jointing with solvent cement all as specified and directed.

Chromium plated angle valves of 15 mm bore, with adjustable wall flange fixed in repair complete all as specified and directed.

Towel rail 600 mm long of chrome plated fixed with and including chromium plated brass screws and cleats fixed in repair complete all as specified and directed.

110 Bore PVC (SWR) Pipes single socketed in any lenth with rubber ring joints fixed to walls complete all as specified and directed.

75 mm Bore PVC (SWR) Pipes single socketed in any lenth with rubber ring joints fixed to wall complete all as specified and directed.

PVC (SWR) bends any radius 75 mm bore complete all as specified and directed.

Hacking out old broken glass (any thickness, quality or description) from wooden frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

4 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.

Vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including water pipe, grating etc complete all as secified and directed.

Soap dish holder fixed in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN-1131N or euivalent in Kohler/Cera

CP waste coupling 32 mm bore with cup and washers fixed in repair complete all as specified and directed. Make : Jaquar Cat Part No ALD-709L130 or euivalent in Kohler /cera

Preparation of old surfaces of walls and applying two coats of white wash over a coat of primer complete all as specified and directed.

Preparation of old surfaces of ceiling and applying two coats of white wash over a coat of primer complete all as specified and directed.

Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pilars etc but excluding ashlar facings, dressed stone work and precast concrete articles, pilars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Brick work with sub class "B" bricks straight or curved on plan exceeding 6 Metre mean radius in cement mortar 1:6 complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations etc and getting out any type of soil complete all as specified and directed.

Concrete bed (1:3:6) to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm dia SWG pipes complete all as specified and directed.

PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundations and mass concrete complete all as specified and directed.

Removing excavated material exceeding 250 m but not exceeding 500 m and deposited where complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over cut to lenth, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding waith and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Mild steel TMT bars 6 to 8 mm dia as in reinforcement cut to length, bent to shae required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anealed not less than 0.9 mm dia) complete all as specified and directed.

RCC 1:1.5:3 type A-1 (using 20 mm graded aggregate) as in beams, lintels complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, lintels etc rough finished surfaces complete all as specified and directed.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40 mm to face stones and dressing of face beds and joints, as specified, of random rubble walling uncoursed or brought up to courses complete all as specified and directed.

Keyed pointing to random or polygonal rubble, uncourse or brought upto courses cement mortar 1:3 complete all as specified and directed.

PCC type B-1, (1:2:4) (using 20 mm graded crushed stone aggregate) as in coping, benching, bed blocks etc. complete all as specified and directed.

110 mm dia PVC (SWR) pipes single stack in any length as in weepholes of retaining wall all complete all as specified and directed.

PVC (SWR) floor trap plain with grating including jointing with solvent cement 100 mm bore fixed in repair complete all as specified and directed.

PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.

Construction of septic tank 10 Users including excavation and earth work in any type of soil, foundation in PCC 1:2:4, brick work in cement mortar 1:4 RCC slab cover etc complete as shown in drg No. TD CE/TD -1202/2003 sheet No 1/2 and 2/2 dated 09-10-2003 and as directed. Note:- Rate quoted deemed inclusive of dewatering during construction if met with.

Construction of soakage well 1.2 M dia and 3 Mtr deep including excavation and earth work in any type of soil foundation in PCC 1:3:6 walls of honey combed and solid, M-25 concrete, RCC cover slab and filling with brick bats complete as shown in drgs No.TD CE/TD -1202/2003 sheet No 1/2 and 2/2 dated 09-10-2003 and as directed. Note:- Rate quoted shall deemed inclusive of dewatering during construction if met with.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out returning filling in and ramming earth or broken stone boulders mixed with boulders complete all as specified and directed.

Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) as Foundation beams, plinth beams, bases for columns etc all as specified and directed by Engr-in-Charge.

Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) as in beams, lintel band, roof band, gable band etc complete all as specified and directed by Engr-in-Charge.

Formwork to flat rough finished surfaces of concrete of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed by Engr-in-Charge.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs etc complete all as specified and directed by Engr-in-Charge.

Preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

Preparation of steel and iron surfaces not exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

15 mm thick cement plaster on the fair face of brick or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

15 mm thick cement plaster in cement mortar 1:4 on bricks or concrete surface and finished even and fair complete all as specified and directed.

Preparing new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Preparation of new palstered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base, 75 mm thick complete all as specified and directed.

50 mm thick cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth withiut using extracement and providing joints througout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 gradeand three parts of sand by weight, complete all as specified and directed.

Screed bed or bedding layer 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Non skid coloured ceramic tiles of size 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thk (stiles), with 2 to 4 or 6 raised panel design with 2 mm thk 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2 mm plain colour PVC sheet on back face complete all as specified and directed in SSR Part - I, Section 8B.1.1

Aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specified and directed.

MS tower bolt 150 mm long complete all as specified and directed.

Steel ventilatirs top hung shutters including hinges, steel peg stays and one coat of zinc chromate primer complete all as specified and directed.

3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm each pane complete all as specified and directed.

Non abestos fibre cement building boards (6 mm) fixed or laid/inserted to timber GI, Aluminium frame work with screws complete all as specified and directed.

Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

Hangers 6 mm dia GI upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fastners 12.5 mm dia 40 mm long complete all as specified and directed.

Steel water tubing medium grade galvanised with all fittings laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15 mm complete all as specified and directed.

Steel water tubing medium grade galvanised with all fittings laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm complete all as specified and directed.

Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and directed.

100 mm cast iron soil, sand cast, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and directed.

50 mm cast iron soil, sand cast, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified and directed.

Cast iron cowls 50 mm for soil, waste and vent pipes complete all as specified and directed.

Rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories complete all as specified and directed.

Water closet vitreous china wash down water closet pan (padestal pattern), white (excluding flushing cistern and flush pipe) complete all as specified and directed. Make: Hindustan/CERA/Prayag

PVC valveless syphnic action type low level flushing cistern of 10 ltrs white, with inlet, ball valve, float valve, float and handle including brackets complete all as specified and directed.

Rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to grade Fe 290 (Gde E-165) complete all as specified and directed.

0.63 mm galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with J or L type hooks complete all as specified and directed by Engr-in-Charge.

Chromium plated shower roses with or without swivel joints, 125 mm size including fixing to steel pipe or union complete all as specified and directed.

Brass chromuim plated Towel Rail 40 mm long of 20 mm dia with and including chromium plated brass screws complete all as specified and directed.

Soap dish, vitreous china white approximate size 160 x 160 x 90 mm fixed with chrimoium plated brass screws complete all as specified and directed.

Cement concrete 1:4:8 type D-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of 150 mm dia pipes after they are laid and tested complete all as specified and directed.

150 mm dia Salt glazed stoneware drain pipes laid in trench and jointed complete all as specified and directed.

Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:4 complete all as specified and directed.

Cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregates) as in surface channels and drains complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

Dismantling boarding, any description fixed in any position with nails complete all as specified and directed.

Second class hard wood Sal plain solid, straight chowkhats and frames wrought framed rebatted on the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and directed.

18/19 mm thick plywood, grade 1 (with BWR resistance/termite proof) with screws to timber frame work as in cup boards/cabinets etc complete all as specified and directed. Make : Century/kitply or equivalent.

0.9 mm thick decorative choice of lamination type-1 of surface finish white stuck with imported adhesive on sides of board complete all as specified and directed. Make : Corby/Euro

10 mm thick bevelled edge glass of area not exceeding 0.2 Sqm each as in shelves of size and shape as required at site complete all as specified and directed.

Stainless steel clamps capable of supporting glass shelves of maximum width 200 mm complete all as specified and directed.

100 mm long extruded brass handle olished bright complete all as specified and directed.

Designer brass barrel tower bots of size 100 mm (ISI Marked) including screws and fixed complete all as specified and directed.

Brass mortice lock 30 mm long for cup boards complete all as specified and directed.

Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall including fixing cantilever brackets and connecting union to pipe fixed in repairs complete all as specifice and directed.

25 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in floor and finished even and fair complete all as specified and directed.

10 mm thick rendering on fair faces of brick/ concrete surfaces in cement mortar 1:3 and finished even and fair for receiving tiles on vertical surface complete all as specified and directed.

Glazed ceramic tiles of size 350 mm x 250 mm x 7 mm/450 x 350 x 7 mm thick coloured tiles on vertical surfaces set and jointed in neat cement slurry and pointed in white cement mixed with colour pigments to match the existing surface complete all as specified and directed.

Excavation over areas, not exceeding 1.5 m deep and geeting out in hard/dense soil complete all as specified and directed.

Tubular truss with purlin, rafter, struts and post and fixed with angle cleats or other connecting plates confirming to Gde Fe 410-0 or Fe-310-0 complete all as specified and directed.

PCC (1:2:4) type B-2 (using 40 mm graded aggregate) as in foundation, filling in post holes complete all as specified and directed.

Preparation of new plastered surfaces and applying two coats of cement based paint over a coat of chalk whiting complete all as specified and directed.

150 mm thick PCC type B-2, 1:2:4 (using 40 mm graded aggregates) as in paved area shall be laid in alternate bay, 10 mm thick joint shall be provided joint shall be filled with bitumen mastic, bitumen mastic shall comprises of 1 part of hoted bitumen 85/25 and 3 parts of sand all by weight finishing cement concrete surface even & fair without using extra cement complete all as specified and directed.

Taking down carefully, copper/aluminum point wiring (light, fan, socket or power) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as specified and directed.

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable in and including not less than 2.00 mm thick 20 mm dia and over Non metallic Rigid PVC surface/ Concealed Conduit (ISI marked) with and all accessories 1.5 mm thick mild steel terminal boxes concealed on walls, painting the same inside and out side with one coat of black bitumen paint with 3 mm thick hylam brand bakelite sheet cover for fixing of piano switches/ sockets/regulator etc along with PVC insulated and unsheathed FRLS 1.00 sqmm multi stranded copper conductor cable (green color) as earth lead & connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and directed by Engr-in-Charge. Make - KEI or equivalent make in polycab/finolex

All as per ser item No 138 hereinbefore above but for one 3 pin 5 Amp socket outlet point controlled by one push button on same board complete all as specified and directed. Make - Anchor or equivalent make in polycab/Havells

All as per ser item No 138 hereinbefore above but for one 3 pin 5 Amp socket outlet point controlled by one push button on independent board, cable 2.5 Sqmm including copper PVC insulated PVC unsheathed 1.5 sqmm earth wire standard and connected to earth dolly complete all as specified and directed.

All as per ser item No 138 hereinbefore above but for one 3 Pin 15 Amps socket outlet independent with cable 4.0 Sqmm including copper PVC insulated PVC unsheathed 2.5 sqmm earth wire standard and connected to earth dolly complete all as specified and directed.

Switch piano flush button single pole one way 5 amps 240 volt in repair complete all as specified and directed.

Socket outlet 2 in 1, 3 pin, 5A, 240 Volt in repair complete all as specified and directed.

Switch socket combination 5 Amps 2-in-1, 5 Pin flush type, 230 volts in repair complete all as specified and directed.

Switch socket combination 5 pin 16 amp, flush type in repair complete all as specified and directed.

Ceiling rose surface bakelite 3 terminals in repair complete all as specified and directed. Make : Cona Cat Part No 2126/SSK Cat Part No 572 or equivalent of make in Havells/ Anchor/Kolors.

Fan regulator electronic, stepped type hum free suitable control speed of fan from 0 to 100 % and connecting electrically in repair complete all as specified and directed.

Single pole and neutral enclosure surface mounted 240 volts with 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of complete all as specified and directed.

Bell push 230 volts, AC complete all as specified and directed. Make - Havells/ Anchor/Kolors

Call bell ding-dong 230 volts including taking down old one complete all as specified and directed. Make - Anchor/Havells/Kinjal

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately.

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification including taking down old one complete all as specified and directed. Make : Indoasian/Legrand/Standard. Note - MCBs will be measured separately.

Replacement New E-Lite LED Curve, high lumen batten with efficacy of 100 lumens in 20 W complete all as specified and directed by Engr-in-Charge. Make - Havells, Cat Part No LHEXBXPNIN1W020 or equivalent to Polycab /HPL/Bajaj.

Replacement of New E-Lite LED Curve, high lumen batten with efficacy of 100 lumens in 10 W complete all as specified and directed by Engr-in-Charge. Make - Havells, Cat Part No LHEXBXPNIN1W010 or equivalent to Polycab/HPL/Bajaj.

Replacement of LED bulk head luminaire, 10 W (ENDURA RUGBY) Havells, Cat Part No LHEOAOP7UZ6W010 230 Volts wall/surface mounted complete with with LED lamp 10 watt, with all accessories, pre-wired, including providing flexible copper wire, twin core cable complete all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanised steel earth plate electode 600 mm x 600 mm x 6.00 mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level connected to and including galvanised steel earth lead wire 4 mm dia by means of bolts, nuts, chock, nuts and washers of galvanised iron or steel including PCC Pit in 1:2:4 type B-1 angle iron frame with RCC cover and handle, excavation and earth work in any type of soil medium grade GI watering pipe 20 mm bore with funnel and wire mash and light grade GI protection pipe 15 mm bore upto main board complete all as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected to main control board complete all as specified and directed and testing completion.

Trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 6 Sqmm x 2 core size complete all as specified and directed. Make - KEI, Finolex & Polycab. Note : Earth work and other connected work shall be measured & paid sperately.

Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying and streching the cable in trenches, including hand punning and consolidating complete all as specified and directed. Note : for payment purpose punned thickness shall be measured

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.

Stop valves/Gate valves 20 mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

GI tubing Light grade 25 mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and directed.

GI tubing Medium grade 15 mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and directed.

GI tubing Medium grade 20 mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and directed.

Plug type bib taps, cast iron, screwed for iron pipe 15 mm dia bore and fixed complete all as specified and directed.

Geyser (water heater) storage type, Electric Supplied and installed complete capcity of 25 Ltrs complete all as specified and directed. Make - Havells/Bajaj, Cat Part No GHWASESWH025 Including all Hot & Cold flexible pipe, GI connection (cutting T, inserting all type of (Elbow, Nipple etc)

Exhaust fan Ventil Air - DB 300 mm including louver with complete chase cutting of wall any type complete all as specified and directed. Make - Havells/Polycab/Bajaj.

Fluorescent tube light fitting 1 x 36 W flame proof type FLP-WP made of alluminium alloy LM6, with electronic ballast, bipin holders, connector block etc. complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make - Havells/HPL/Bajaj.

Switch piano type 5 Amps 230 volts one way complete all as specified and directed. Make - Anchor/Havells/Kinjal

Switch-Socket combination 15 Amps, 6 Pin multipurpose complete all as specified and directed. Make : Anchor/Havells/Kinjal

Socket outlet 5 pin, 5 Amps combined complete all as specified and directed. Make - Anchor/Havells/Kinjal

Replacement of Slim linear LED tube light fixture 20 Watt as per 4 Ft white, Garnet Batten, Housing made of extruded AL with lumen O/P should not be less than 100 lum /watt with wider beam angle should be greater than 120 deg and poly difuser CRI should be more than 70. & PF should be greater than 0.9 making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete all as specified and directed. Make ; Havells Cat part No LHEXBYPNIN1W020 or equivalent Bajaj/HPL

Replacement of Slim linear LED lighting fixture 5 Watt LED Batten, for mirror light purpose, complete making all connection using 1.5 sqmm copper conductor multistrand PVC insulated 3 core flexible cable from ceiling rose to fitting complete all as per the direction of Engr-in-Charge. Make ; Havells Cat part No LHEXARP7PN1W009 or equivalent Bajaj/HPL

Replacement of Slim linear 9/10 watt LED bulk head light energy saving eith IP65 with opal diffuser, pressure die cast aluminium housing complete all as per the direction of Engr-in-Charge. Make ; Havells Cat part No LHEOAOP7UZ6W010 or equivalent Bajaj/HPL

Replacement of Sheet metal enclosure single pole and neutral with 2 pin and earth plug and socket 20A 240V complete with one single pole MCB of any cap from 10 Amp to 20 Amp, 10 KA complete all as specified and directed.

Replacement of MCB single pole 240 volt any rating from 32 amps 'B' series with bearing capacity 10 KA complete all as specified and directed. Make : Standard/Indoasian/Legrand.

Replacement of MCB single & Neutral 240 volt any rating 63 amps 'B' series with bearing capacity 10 KA complete all as specified and directed. Make : Indoasian, Cat Part No 811037 or equivalent Standard /Legrand.

Submain wiring with two single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 6 sqmm and one single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 4.0 sqmm as earth lead in & inculding PVC casing/non metallic rigide PVC conduit medium grade and making good the distured at site or complete all as specified and directed by Engr-in-Charge. Make - KEI or equivalent make in polycab/finolex.

Exhaust fan star rated 300 mm sweep 230 volts single phase with complete louvers, making holes, handing in position and connecting to electric system using insulated and overall sheathed flexible copper conductor cable of size 23/0.0076 and testing complete all as specified and directed by Engr-in-Charge. Make - Havells (Venti air-DS, Metallic body) or equivalent make in Khaitan/ Bajaj.

vijay constrction co

khajuria builders

KALSOTRA CONSTRUCTION CO

s l sharma and sons

M/S ASHOK KUMAR PACHIALA

VARDHMAN INTERNATIONAL

JINDAL BUILDERS

PARDEEP SHARMA