Providing Gardening and Greenry Works at Pallapatty Lake

Amount

Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thi

Supplying and filling in basement with Gravel in layers of 15cm thick including watering and ramming to consolidation 1 m3

Pvc Items Finolex (Or) Equivalent (With Isi Monogram M-0868 63mm dia

Lowering PVC/ DWSC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.

63mm Pvc Coupling

63mm Pvc bend

63mm Pvc dummy

63mm Pvc mta

Supply and fixing of popup sprinkler for irrigation lawn area with 12m radius to get uniform precipitation and watering including all cost of materials labour charges complete as per standard specification

Supplying and planting of Mexican lawn in & australian dipling method etc., Complete with all laboour, lead and lift and as directed by the engineer-in charge. (All labour, materials, tools and plants etc., by contractor)

Providing and laying spreading and compacting graded stone aggregate to wet mix macadam (WMM) specification including promixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper.to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. (SOR 2023-2024)

Providing and laying of Rubber Moulded Hydraulic Pressed Paver Block size 83mm thick to be laid in lorrying bone pattern with approved non sticking surface in the top and the rate including leveling the base, preparation of sub base with sand cushion 100m

Painting with best synthetic enamel paint of approved Colour and high quality one / two coats to old / new iron works (SOR 2023-2024)

Providing following type of plants for park lawn area including finishing and labour charges cost and conveyance of all material at site etc., complete as per standard specification.

Supplying and erecting for shuttering, including necessary supports for plane surface in foundation and basement for RCC column footings, Plinth beams, staircase steps, etc., using mild steel sheets of size 90cm x 60cm and 10gauge, stiffened with mild steel angle of size 25mm x 25mm x 3mm for boarding, supported by silver oak joists of size 10 x6.5cm, spaced at about 90cm centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete, complying with standard specifications and as directed etc., complete - 1 m2 (SOR 2023-2024)

Reinforced Cement concrete 1:1.5 :3 (one cement, one & half M.sand and three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. (SOR 2023-2024)

Supplying, fabricating and placing in position Mild Steel/Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) (SOR 2023-2024)

Supplying and filling in basement with M-Sand in layer of thick including watering and ramming in Consolidation 1Cu.m

Providing cut stone kerb stone of size 60cm x 10cm x 37.5cm with all faces neatly dressed oneline dressing with chambered edge on the road side including earth work excavation in all soils for 10cm width and 22.5cm depth and fixing the stone in position including grouting the joints with cement mortar 1:3 mix etc., complete

Supply and fixing of granite garden bench including cost and conveyance of all materials to site and all labour charges etc complete.

Fabricating and supplying and erecting the required number of trusses with structural steel members like angle iron MS plates for all truss members including cleats to receive the purlines all cutting drilling holes welding and fixing of members with necessary bolts nuts anchor bolt of approved quality hoisitn aligning and glazing the trusses inposition as per plan. The rate should include the cost painting the members with one coat of red oxide primer and zinc chromate and 2 coats of enamel painting etc., complete complying with standard specification and an directed bya the departmental officers. (SOR 2023-2024)

BALAGURU INFRA (BID ID -1090386)