GE GSR- 11/ 2022-2023 Repair to roof, chajja, facia, parapet, shafts and sunken floor, plumbing, tiling, sanitary fitting and misc repair in OTM and Md Accn of certain units under AGE B/R-II, GE Gurdaspur

Amount

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and fair including taking down old cement plaster complete all as specified and directed

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6. finishing even and smooth without using extra cement including taking down old cement plaster complete all as specified and directed

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extra cement incl taking down old cement plaster complete all as specified and directed

Taking down cement plaster/deteriorated concrete from bottom of RCC Chhajja/RCC facia/RCC beam/RCC slab/brick work including racking out joints, hacking for key, scrubbing down with water (at a bldg height upto 3.50m) and removing rubbish to a distance exceeding 50mtr but not exceeding 100mtr away and M&L for 15mm thick plaster in CM 1:3 finished even and fair on bottom of RCC Chhajja & RCC facia complete all as specified and directed by Engr-in-Charge

All as per Srl item No 04 above but bldg height exc. 3.50m and n. exc. 7.00m.

M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved complete all as specified and directed.

M&L for prepration of newly plastered or un plastered surfaces of wall two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for prepration of newly plastered or un plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Taking down Chowkats or frames from the opening of size not exceeding 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed

All as per Srl item No 09 above but size of opening exceeding 1.50 Sqm but not exceeding 4.00 Sqm

Taking down Shutters of any description of size exceeding 1.00 sqm and not exceeding 2.00 sqm each leaf complete all as specified and directed

Taking down old existing window and S&F steel window box type made of ERW tube hollow P section of size 60mmX25mm double rebated outer frame comprising double shutters i.e. guaged skelton & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 complete: :- (i) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iii) MS Tower bolt 150mm long-02 Nos per leaf (iv) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm -02 Nos per leaf (vi) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (vii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass shall be measured and paid for separately

Taking down old existing window/ ventilator and S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts complete all as specified and directed. Note: Glass shall be measured and paid for separately

S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with single or double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed.

S&F 35mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI Marked, complete all as specified and directed.

S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails & bottom rail;Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work conform-ing to Fe 410-0 or Fe 310-0 including dismanling old MS work complete all as specified and directed.

S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

Material and labour for hacking out old broken glass (any thickness, size, quality of description) from wooden/ steel window, glazed with putty or fixed with beads, cleaning the surface and removing from the site complete all as specified and as directed.

S&F Sheet glass, 3mm thick, ordinary quality, in squares, not exceeding 0.50 Sqm in each pane fixed with oil putty complete all as specified and directed.

All as per Srl item No 22 above but figured glass pin head type.

S&F Mild steel sliding door bolts 300mm long stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete

S&F Mild steel barrel tower bolts, 150mm size, stove enamelled black complete all as specified and directed

S&F 150 mm long mild steel pressed handle, oval type, stove enamelled complete all as specified and directed

S&F150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F extruded Aluminium alloy handles, size 150mm, fabricated type anodised complete all as specified and directed.

S&F 100mm long butt Hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed

S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and directed

M&L in repair for Block Boards, 18/19mm thick, grade 1 quality , exterior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed

S&F 100mm long Hasp and staple , safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

S&F in repair mild steel 300 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed

M&L for two coats of synthetic enamel painting over one coat of red oxide primer on new steel surfaces of any description over 10 cm in width or girth not otherwise described including preperation of surface complete all as specified and directed.

M&L of two coats of synthetic enamel painting over a coat of pink primer on wooden surfaces of any description over 10 cm in width or girth not otherwise described including preperation of surface complete all as specified and directed.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

S&F glazed ceramic coloured tiles 300x200mmx 6 to 7 mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:3 on brick surface and dismantling floor, hearth or wall tiling including cement mortar beddingr complete all as specified and directed.

S&F in repairs vitreous China squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and all necessary fittings, connections for inlet, outlet, anti-syphonage pipes, etc including making good to floor complete all as specified and directed

S&F in repair 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle complete all as specified and directed

S&F in repair vitreous China wash basin white, flat back size 550x400mm including PTMT waste coupling 32mm bore, including CI brackets complete

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm.

Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed

All as per Srl item No 43 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 42 shall be reused after necessary cleaning of mortar)

Dismantling water tanks exc 250 Ltr & not exceeding 500Ltr and S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

Taking up or down 15mm dia steel tubing and connections all as specified and directed.

Fixing only 15mm dia steel tubing with all new fittings and connection in new or old position (in wall ceiling floors etc) including cleaning all as specified and directed.

S&F 15mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections all as specified and directed.

Fixing only 20mm dia steel tubing with all new fittings and connection in new or old position (in wall ceiling floors etc) including cleanin all as specified and directed.

S&F 20mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.

S&F in repair 15 mm Gun metal , globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

All as per item 52 above here-in-before but 20 mm bore

S&F in repairs cast copper alloy CP angle valve 15mm bore fancy type screwed down for high pressure complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without lettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed.

S&F in repair for 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed

S&F in repair bib taps 15mm dia cast copper alloy chromium plated fancy type long body with capstan head screwed down screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs brass chroumium plated shower rose 125mm size all as specified and directed.

S&F in repair PVC waste pipe 32mm bore for WHB/Sink of requisite length as specified and directed.

S&F in repairs 100mm dia stainless steel grating with or without hinge type or hole type complete all specified and directed.

Taking down eaves gutters and rain water pipes ( any size or pattern), including all fittings , heads, shoes, bends, swan necks, etc

S&F 110mm bore PVC(SWR) pipes single socketed in any length with rubber ring joint, fixed to walls.

S&F 75mm bore PVC(SWR) pipes single socketed in any length with rubber ring joint, fixed to walls.

S&F 110mm bore PVC (SWR) bends any radius with access door

S&F 75mm bore PVC (SWR) bends any radius with access door

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110mm bore pipe all as specified and directed.

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipe all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finishing surface even and smooth without using extra cement complete all as specified and directed

M&L for 50 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection finishing surface even and smooth without using extra cement.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor (to raise level only).

M&L for chequered cement concrete tiles coloured 30cmx30 cmx25mm thick, set jointed and pointed in neat cement slurry with pigment complete in floor including 15mm thick screed bed in CM 1:4.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar

M&L Granite (of any type) work (table rubbed and polished), 14 to 18mm thick, in steps , jambs, pillars, window - cills, cooking plate forms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

S&F in repair sinks with drainage board made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe overall size 915mmx460mm, bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repairs curtain rod MS pipe 20mm bore, powder coated with fixing brackets including fancy type knobs two Nos to each curtain rod.

M&L for preparation of old decorated brick/concrete/plastered or unplastered surfaces wall, pillars,cornices and removing all loose material and filling the all holes/patches with wall care putty to make surface smooth and applying one coats of OBD complete all as specfied and directed

M&L for preparation of old decorated plastered surface and removing all loose material and applying two coats of OBD over 1mm thick wall care putty to make surface smooth complete all as specfied and directed

M&L for preparation of old decorated brick/concrete/plastered or unplastered surfaces wall, pillars,cornices and removing all loose material and filling the all holes/patches with wall care putty to make surface smooth and applying one coats of cement base paint complete all as specfied and directed

M&L for preparation old plastered /un plastered surfaces of ceiling and applying one coat of white wash on ceiling complete all as specified and directed

M&L for preparation of old plastered surface of walls and applying one coat of white wash on wall.

M&L for preparation of old painted surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No 83 above but on steel surface

Demolition of plain cement Concrete in sunken floors exc 15cm thick ( above ground level) complete all as specified and directed

M&L for APP based polymeric membrance minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gm/sqm) laid by forced application on primed surface with bituminous primer @ 0.30 Ltr /Sqm and applying evenly a tack coat of Industrial bitumen 85/25 @ 1.20 Kg per sqm including cleaning of surfaces complete all as specified and directed complete all as specified.

M&L for 15 mm thick rendering on fair faces of concrete surfaces in CM 1:4 with water proofing compound as per manufacturer's instructions and including taking down of old plaster on concrete/brick surface complete all as specified and directed.

Supply only integral water proofing compound.

M&L for plain cement concrete 1:7:12 type F-2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sunken portion complete all as specified and directed

M&L 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement

M&L 110mm bore PVC (SWR) 'P' trap including jointing with solvent cement

Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified & directed.

Demolition of mud in roofs , any thickness , including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified & directed.

M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in roof kerbs, levelling course with water proofing compound as per manufacturer's instructions finished even and fair complete all as specified and directed.

M&L for 40 mm thick brick tiles laid over 15 mm thick plaster in cement mortar 1:4 and jointed, grouted flush in cement mortar 1:3 mixed 5% of crude oil by weight of cement complete all as specified and directed

All as per item No 96 but except tiles. (old dismantled serviceable bricks tiles obtained from Srl item No 93 shall be reused after necessary cleaning)

Disconnecting existing tanks setting aside (or lowering if required) for repair Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and hoisting if reqd, reconnecting and refixing in position capacity exc. 250 and n. exc. 500 ltrs all as spd & directed

Cutting down plants/ shrubs of girth n. exc 15cm from roof tops/ sides of external walls of building, chajjas, wall, junction etc including taking out penetrated roots in to the wall, slab surfaces, shafts and applying "STUFALO" solution (herbal medicine) as per manufacture's instructions in and around the surfaces and making good the location with PCC (1:2:4) and cement mortar (1:2) including necessary scaffolding as per site requirement all as spd and directed.

Note: A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.