Estimate for concrete lining of Maujewal Minor (RD 0-4485) offtaking at RD 44772/R of Daulatwah Disty

MISCELLANEOUS: Ordinary jungle clearance of both banks of running distributaries, minors and drains with discharge upto 9cum/s including boundary road: Discharge upto 1.5 cum/s

EARTH WORK: Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.

EARTH WORK: Dressing of earth work New work or remodeling work.

EARTH WORK: Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

LINING: Filling expansion joints with special impervious hot pour 12.5mm wide

LINING: Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing: 0 to 1.5 m depth

LINING: Dressing side slopes and preparation of sub grade for lining.

LINING: Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes

LINING: Cement concrete lining 75/60mm. thick or less laid manually for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km

LINING: Cement concrete lining 75/60mm. thick or less laid manually for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km (For coping)

LINING: Cement concrete lining 75/60mm. thick or less laid manually for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km(For Sleepers)

HOISTING, ROOFING AND WATER PROOFING: Extra bitumen painting at 0.69 Kg. per sqm

Shuttering for faces of concrete foundations and foundation beam and plinth beam ( vertical or battering)

Excavation in soil using hydraulic jcb and hydraulic trolley with disposal upto 450 m including cutting and loading in trolley, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to embankment location within all lifts and lead. (lead = 6.36 km with 1st 3.06 Km katcha & last 3.30 Km pucca)

Extra for laying earthwork as per specifications for compaction in 20 cm layer and dressing including cost of rolling and watering as per specifications

Filling Contraction Joint with sealing compound complete in all respect

Polythene films/ sheet of 100,125, 150, 200,250 micron

Dag Belling Single Kassi Stroke complete in all respect.

Reconstruction of V.R. Bridge at RD 12820 Bahadurpur minor of 6-R disty: DISMANTLING: Dismantling brick work tile, masonry or tile lining In cement

DISMANTLING: Dismantling concrete Reinforced cement concrete

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil. By Mechanical Means. Depth upto 3 m.

Preparing, watering and ramming surface for laying concrete. Head work. Horizontal.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15.

BRIDGES - SUPER STRUCTURE & PROTECTION WORK: Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC Grade M25. Using Batching Plant, Transit Mixer and Concrete Pump. For Solid slab super-structure-including centering and shuttering, Height up to 5m.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 With Batching Plant, Transit Mixer and Concrete Pump.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M30 With Batching Plant, Transit Mixer and Concrete Pump.

BRIDGES - SUPER STRUCTURE & PROTECTION WORK: Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC/PSC Grade M40. Using Batching Plant, Transit Mixer and Concrete Pump For Solid slab super-structure-including centering and shuttering, Height up to 5m.

Compaction: Extra for rolling to specifications.

Painting on concrete surface: Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm.

BRIDGES - SUPER STRUCTURE & PROTECTION WORK: Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.

BRIDGES- FOUNDATIONS & SUB- STRUCTURE: Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications.

Filling expansion joints with special impervious hot pour Bituminous 525 mm deep and 20 mm wide.

Drainage Spouts complete as per drawing no. SD/205 and Technical specification with 0.6 meter long GI 100 mm dia drainage GI light grade pipe (For Bridges)

Reconstruction of V.R. Bridge at RD 33950 Bahadurpur minor of 6-R disty: DISMANTLING: Dismantling brick work tile, masonry or tile lining In cement

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil. By Mechanical Means. Depth upto 3 m.

Preparing, watering and ramming surface for laying concrete. Head work. Horizontal.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15.

BRIDGES - SUPER STRUCTURE & PROTECTION WORK: Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC Grade M25. Using Batching Plant, Transit Mixer and Concrete Pump. For Solid slab super-structure-including centering and shuttering, Height up to 5m.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 With Batching Plant, Transit Mixer and Concrete Pump.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M30 With Batching Plant, Transit Mixer and Concrete Pump.

BRIDGES - SUPER STRUCTURE & PROTECTION WORK: Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification. RCC/PSC Grade M40. Using Batching Plant, Transit Mixer and Concrete Pump For Solid slab super-structure-including centering and shuttering, Height up to 5m.

Compaction: Extra for rolling to specifications.

Painting on concrete surface: Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm.

BRIDGES - SUPER STRUCTURE & PROTECTION WORK: Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.

Filling expansion joints with special impervious hot pour 12.5mm wide.

Drainage Spouts complete as per drawing no. SD/205 and Technical specification with 0.6 meter long GI 100 mm dia drainage GI light grade pipe (For Bridges)

BRIDGES- FOUNDATIONS & SUB- STRUCTURE: Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications.

Estimate for reconstruction of Fall at RD 5500 of Bahadurpur Minor of 6-R Disty: Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications: RCC Grade M20: Height upto 5m: With Batching Plant Transit Mixer and Concrete Pump

Dismantling brick work tile, masonry or tile lining in cement.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil (B) Mechanical Means (a) Depth upto 3 m

Preparing, watering and ramming surface for laying concrete.

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 ((a)) Height upto 5m ((ii)) With Batching Plant, Transit Mixer and Concrete Pump

Supplying & laying dry brick ballast.

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications.

Cement concrete 1:3:6 (a) with stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type

Compaction: Extra for rolling to specifications

Estimate for reconstruction of Fall at RD 10086 of Bahadurpur Minor of 6-R Disty: Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications: RCC Grade M20: Height upto 5m: With Batching Plant Transit Mixer and Concrete Pump

Dismantling brick work tile, masonry or tile lining in cement.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil (B) Mechanical Means (a) Depth upto 3 m

Preparing watering and ramming surface for laying concrete (a) Head work (i) Horizontal

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 Height upto 5m With Batching Plant, Transit Mixer and Concrete Pump

Supplying & laying dry brick ballast.

Cement concrete 1:3:6 (a) with stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type

Compaction: Extra for rolling to specifications

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications.

Supplying & laying dry brick ballast

Estimate for reconstruction of Fall at RD 28088 of Bahadurpur Minor of 6-R Disty: Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications: RCC Grade M20: Height upto 5m: With Batching Plant Transit Mixer and Concrete Pump

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil (B) Mechanical Means (a) Depth upto 3 m

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications: RCC Grade M25 Height upto 5m ((ii)) With Batching Plant, Transit Mixer and Concrete Pump

Compaction ((iii)) Extra for rolling to specifications.

Supplying & laying dry brick ballast.

Cement concrete 1:3:6 (a) with stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type

Preparing watering and ramming surface for laying concrete (a) Head work (i) Horizontal

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications.

Construction of Head-cum-cross Regulator: Dismantling brick work tile, masonry or tile lining in cement.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil (B) Mechanical Means (a) Depth upto 3 m

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications (E) RCC Grade M20 ((a)) Height upto 5m ((ii)) With Batching Plant Transit Mixer and Concrete Pump

Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications for RCC M-25 grade, Using Batching Plant, Transit Mixer and Concrete Pump

Supplying & laying dry brick ballast.

Compaction ((iii)) Extra for rolling to specifications.

Re-handling of Earthwork with lead 30 meters

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Supply of multipurpose synthetic Hetiv Grease.

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position a) R S Joists

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position b) Flats

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position c) Tees angles & channels

Supply of Skin plate

Providing and fixing of Galvanized nuts & bolts of all sizes and length required

Providing and fixing of stainless steel nuts & bolts of all sizes and length required

Providing & fixing in position of flat/ wedge seal including preparation of surface complete I all respects and to entire satisfaction of Engineer in charge. (ii)75 mm Ø x 12 mm Th.

Providing of hollow bulb seal and fixing in position including preparation of surface complete in all respect and to entire satisfaction of Engineer in charge 100/44 (44 dia, 100*4)

Commissioning and testing of Gates at site complete in all repects and to entire satisfaction of engineer-in-charge

MS Spindle with double start or triple start threading 11' height 1/3/4/"dia complete (i) upto 1.5 ton capacity

Supply and fixing of spindle cover

Hiring charges of machinery crane 35 ton

Fillet welding with high strength steel rods complete in all repects and to entire satisfaction of engineer-in-charge (ii) 8 mm wide

Drilling/ boring hole including complete in all respects and to entire satisfaction of Engineer-in-charge (ii)10-20 mm Ø

LED based SPV Street lighting system: 12 Watt 75 SPV module 12.8V-30Ah, lithium ferro phosphate battery (>2000 cycles), 6 meter hot dipped GI pole, 76.1 mm OD, 3.6 mm thick & Zinc coated.

Supply of multi grade mobile oil

Removing, providing and fixing SS Flat, complete in all respect

Providing and laying, jointing, fixing, testing ISI marked G.I. Pipe (as per IS 1239) B-Class, including cost of specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. 50 NB

CI housing cover with worm and worm wheel assembly, shaft, handle GM bust with triple start threading inside for spindle complete including labor charges

Cement concrete 1:3:6 (a) with stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type

Cement concrete 1:4:8 (a) with brick balast 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type

Preparing watering and ramming surface for laying concrete (a) Head work (i) Horizontal

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications.

Head Regulator : Supply and installation of Single Faced Sluice Gate of Rectangular Shape having size of 675 mm x 525 mm . As per I.S.: 3042 (1965) (as per Quotations)

Proving and Fixing Distance: Cement concrete 1:3:6 with stone ballast or shingle: mixing by mechanical means using concrete mixer volumetric type

Cement concrete 1:2:4 With stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Painting distance marks with synthetic enamel paint ((b)) Two coat work ((ii)) Distributaries

Providing and fixing outlets patrolling side: Earth work for outlet: Earth work involved in dismantling Open flume, A.P.M. or O.S.M. type Outlets (including excavation, refilling , consolidation and dressing ) With H more than 0.5 m but upto 0.9 m

Dismantling outlets including removal of dismantled material involving lead upto 100 metres. Dismantling O.F., A.P.M. or O.S.M. type outlets consisting of total dismantling i.e. concrete R.C. Slab and cement masonry. With H more than 0.5 m but upto 0.9 m

Extra labour for dressing bricks On O.F. and A.P.M. type outlets With H more than 0.5 m. but upto 0.9 m

Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Providing APM cast iron block complete in all respects including supply of pig iron, casting and pattern making, as per ISI specifications no. 7986-1976 ((ii)) 0.25 ft= 7.6 cm (min wt 68 kg)

Providing and fixing outlets non patrolling side: Earth work for outlet: Earth work involved in dismantling Open flume, A.P.M. or O.S.M. type Outlets (including excavation, refilling , consolidation and dressing ) With H more than 0.5 m but upto 0.9 m

Dismantling outlets including removal of dismantled material involving lead upto 100 metres. Dismantling O.F., A.P.M. or O.S.M. type outlets consisting of total dismantling i.e. concrete R.C. Slab and cement masonry. With H more than 0.5 m but upto 0.9 m

Extra labour for dressing bricks On O.F. and A.P.M. type outlets With H more than 0.5 m. but upto 0.9 m

Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Providing APM cast iron block complete in all respects including supply of pig iron, casting and pattern making, as per ISI specifications no. 7986-1976 ((ii)) 0.25 ft= 6.1 cm (min wt 68 kg)

Any Other Item-1

Any Other Item-2

Any Other Item-3

Please Enable Macros to View BoQ information