Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical 01 BALIA BALIA SAGARDIGHI MURSHIDABAD WEST BENGAL 742237 | MURSHIDABAD | WEST BENGAL | 742237 | Accepted-Technical Technically Accepted |
| 2 | Accepted-Technical | Accepted-Technical Technically Accepted |
| 3 | Accepted-Technical DHARSHA NEAR MATH P O GOVT OF INDIA PRESS COLONY DIST HOWRAH PIN 711 112 | HOWRAH | HOWRAH | WEST BENGAL | 711112 | Accepted-Technical Technically Accepted |
Tender Value
Refer Docs
EMD Value
₹10,600
Closing Date
7 Oct 2026, 1:00 pmClosed
the Executive Engineer PWD Howrah Electrical Divis
Onkarmal Jetia Road Howrah 711103
SITC of 8.5Tr 415V ductable air condition machine with allied ducting works at RM803 under NESD (PWD).
2026_WBPWD_5076027_1
WBPWD/EE/HED/e-NIQ-34 of 26-27
Open Tender
Electrical Work/ Equipment
Item Rate
Nabanna
Please refer Tender documents.
8 documents required · 8 mandatory
₹10,600
Howrah Electrical Division
16 Oct 2026
28 Sept 2026
9 Oct 2026
29 Sept 2026
7 Oct 2026
1 Oct 2026
30 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Air Conditioning works: | |||||
| 2 | Charges for dismantling of existing 5.5TR ductable type AC machines complete set and one 2TR high wall AC machine i.e, indoor and outdoor units, refrigerent pipe lines, cables, outdoor brackets etc as directed by the EIC. The same dismantled items submitted to the section store in good running condition. | 1 | Item | 1.25 | ₹1.25 |
| 3 | Charges for dismantling the existing duct line connected to ductable air-conditioning unit, including removal of all associated ducting materials, sealing of wall/floor/ceiling openings created due to dismantling, and making mending goods the affected surfaces as directed by the Engineer-in-Charge (EIC), complete in all respects. | 1 | Item | - | - |
| 4 | SITC of air cooled ducted split type air conditioning machine with each having a capacity and details as mentioned below suitable for operation on R 32/R-410A /R-407 Green refrigerant comprising of Scroll type compressor hermatically sealed complete with automatic capacity, safety switches, lubrication system with min 5 year (OEM) warranty for both compressor and Printed Circuit Board (PCB) , Suitable capacity squirrel cage induction motor having class 'B' insulation suitable for operation on 415 + 10% volts, 50 Hz, A.C. supply for Blower motor, Necessary drive arrangement for blower motor, Matching Air cooled condenser with necessary fittings for refrigerant piping connections, necessary structural support for mounting condensers, Microprocessor based control panel complete with accessories, machine Isolation / disconnect switch, valves and accessories to inter connect compressor and condenser including pressure testing, vacuum. Necessary starters suitable for Indoor & outdoor unit complete with O/L ,U/V, phase reversal protection, single phase preventors i/c copper conductor control and power cable and drain pipe of suitable size and length etc complete as required. The total cooling capacity/heating capacity of tested unit shall have a capacity as per relevant IS code. The lab testing reports as per IS: 8148 shall be submitted from National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited as per ISO/International Electrotechnical Commission (IEC) 17025 standards / Central Power Research Institute (CPRI)/Electrical Research and Development Association (ERDA)with Original Equipment Manufacturer (OEM) etc. complete as per CPWD specification as required.
Non Inverter
8.5 TR (Make: Carrier / Hitachi / Voltus / O-general / Mitshubishi Heavy Electric) | 1 | Each | 100 | ₹100 |
| 5SITC including vaccumiazation and Nitrogen testing of following size soft copper pipe (or OEM recomended size) with complete set with suitable adjustable ring type hanger supports, jointing/brazing including accessories having Class-O closed cell elastometric nitrale rubber insulation as follow and rapping tape from indoor unit to outdoor unit. | |||||
| 5.01 | 1.2mm thick copper pipe dia 5/8 inch or 15.86mm with 19mm thick insulation. | 15 | Mtr | 10 | ₹150 |
| 5.02 | 1.2mm thick copper pipe dia 1-1/8 inch or 28.58mm -Do-. | 15 | Mtr | 11 | ₹165 |
| 6 | SITC of 7core 2.5sqmm flexible copper unarmoured PVC insulated cable from indoor unit to outdoor unit. (Make: Finolex / Polycab / Havells / Gloster / RR Kable) through existing laid PVC pipe. | 20 | Mtr | 11 | ₹220 |
| 7 | Supply & laying 25mm dia UPVC/HDPE pipe & all accessories in wall for drain line with nitrile rubber insulation (MD/ Oriplast/ Supreme). | 26 | Mtr | 11 | ₹286 |
| 8 | S&F of fire returdent non porus double layer flexible canvas connections with existing plenum chamber and new AC machine. Making necessary connection arrangement with new machine with existing plenum chamber. | 1 | Each | 10 | ₹10 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
BOQ_5168633.xls
BOQ • 0.38 MB
2911.pdf
Tender Documents • 1.86 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .