Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC SUDHA RANI VILA GROUND FLOOR 65 NASKAR PARA ROAD KOLKATA 700041 | KOLKATA | KOLKATA | WEST BENGAL | 700041 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹32.7 L+₹2.3 L (7.41%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹33.1 L+₹2.7 L (8.79%)Rejected-Finance NALIAPOOL BAZAR ROAD NEAR GABHARUPATHAR RAILWAY COLONY DIBRUGARH DIST ASSAM 786001 | DIBRUGARH | DIBRUGARH | ASSAM | 786001 | L3 | Rejected-Finance Being other than lowest | |
| 4 | Rejected-Technical | - | Rejected-Technical Being not enlisted in appropriate category |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
4 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer AF Mohanbari
Garrison Engineer AF Mohanbari Mohanbari Post Dibrugarh Assam 786012
WELCOME MAINT OF MD ACCN AND REPAIR CLEANING OF SEPTIC TANK, SEWAGE LINE AND CONNECTED ITEMS AT AF STN MOHANBARI UNDER GE (AF) MOHANBARI
2024_MES_649486_1
8001/548/E8
Open Tender
Civil Works
Item Rate
270 days
Mohanbari
Class D category a i and a ii
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer (AF) Mohanbari
₹60,000
6 Jun 2024
6 Apr 2024
6 May 2024
6 Apr 2024
4 May 2024
20 Apr 2024
Amount
M & L for preparation of old decorated plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.
M & L for preparation of old decorated plastered surfaces of ceiling/false celing and applying one coat of white wash complete all as specified and directed.
M & L for Preparation of old decorated plastered surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.
Preparation of old painted wooden surface of any description over 10 cms widths or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for preparation of old decorated plastered surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying two coat of distemper oil emulsion over one coat of wall care putty incl complete removal of existing treatment complete all as specified and directed.
S&F in repair plastic water closet seat cover for EWC white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed.
S&F in repair CP health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F in repair brass CP mixer Pillar cock for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F Curtain Rails, mild steel, chromium plated with fixing brackets, stops, rollers etc as in repairs complete all as specified and directed.
Supply and fixing in repairs of angle valve(stop valve) 15 mm dia CP fancy type, with long screwed shank and cup, cast copper alloy, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs 15mm bore bib tap brass chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
S&F in repair brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete all as specified and directed.
S&F in repair Chromium plated shower rose 125mm size with swivel joints, any size, including fixing to steel pipe or union of 15 mm size complete all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet, flush pipe fixed as in repair complete jointing, connecting and making good the disturbed surfaces complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed.
Dismantling of floor , hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L glazed coloured ceramic tiles on vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed. Note : Item may be executed in patches also.
S&F in repair 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in cupboard/drawers/kitchen shelves shutters etc, including taking down existing including 5mm thick 2nd class hard wood lipping around the shutter complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S & F 15mm dia GI pipe medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S & F 20 mm dia GI pipe medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.
S & F ball brass valves 20mm bore, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
Supply and Fix in repairs 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, low level, white inlet ball valve, float, and brackets including PTMT PVC connection 600mm long complete all as specified and directed.
M & L PVC (SWR) floor trap of 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.
M & L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
Taking down Chowkhats or frames with shutters area not exc 1.5 sqm each with shutters complete all as specified and directed.
M & L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing mentioned in SSR complete all as specified and directed.
Factory made solid panel PVC door shutter 30mm thick (stile), consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drg complete all as specified and directed.
S & F 150mm Aluminium handles, cast type, anodised complete all as specified and directed.
S & F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 complete all as specified and directed.
Treatment of sunken floor shall be tested for leakage / seepage / dampness by ponding with water for 72 hours. In case any leakage/dampness is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated with following procedures :-
Item No 38 Contd... (a) Demolition of concrete of any description and in any position not otherwise specifically provided or in any type of filling in sunken portion & cleaned the sunken potion incl vertical wall surface complete as directed. (b) S&F spouts of 25mm dia GI pipe light grade projecting 450mm clear of face of outer wall with mosquito proof cap on inner face of pipe shall be provided to drain out seepage water ,including cutting holes and making good if needed as specified and directed. (c) M&L for Laying of 40mm thick (Min) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. Bottom and vertical sides shall be plastered 10 mm thick in cement mortar 1:3 mixed with water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green i.e. PCC & plaster to be carried out at the same time complete all as specified and directed. (d) M & L for 5mm thick cement sand mortar (1:3) admixed with diluted DURAKRIT (1 Durakrit: 3 Water) at the junctions of the wall. Wet the surface with water to make it SSD condition. Apply one coat of DURAKRIT- Acrylic Polymer Modified Cementatious (PMC) slurry coating as per manufacturer specification 1:2 (1 DURAKRIT : 2 cement) by weight on the sunken floor surface, turned up and finished up to 100mm from FFL. Apply second coat of DURAKRIT - Acrylic Polymer Modified Cementatious slurry coating as per manufacturer specification 1:2 (1 DURAKRIT : 2 cement) by weight over the first coat at right angles. The second coat is usually applied after first layer slurry coat has touch dried usually after 4 hrs.complete all as specified and directed. (e) Test again of water tightness by ponding for 72 hours & rectify defects if any till total elimination of defects complete all as specified and directed. (f) M&L to fill the sunken floor with PCC 1:5:10 type E-2 using bk aggregate over the treated surface complete all as specified and directed.
S&F 40mm dia, cupboard knobs brass polished fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified and directed.
M & L for 4mm thick false ceiling board 'E' classic with powder coated GI frame fixed with screw as in ceiling complete all as specified and directed.
S& F telescopic channel slimline premium ball bearing drawer slide powder coated of any size complete all as specified and directed.
S&F in repair cabinet mirror of minimum size of 400 mm x 550 of approved Make complete all as specified and directed.
Supply and fixing in repair 32 mm dia PVC waste pipe of 850mm length for Sink/WHB complete all as specified and directed.
S&F in repair wall mixer swan neck, cast copper alloy with capstan head , chromium plated screwed down, high pressure with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore 3-in-one type mixer with telephonic shower and flexible CP rod of 1.5m length complete all as specified and directed. Make : Hindware or equivalent in CERA/Jaquar.
De-watering of septic tanks and soakage wells by manually or with pumping set and draining out the same out of cantt area complete all as specified and directed.
Taking out sludge from septic tanks incl inlet and outlet chambers, removing and depositing the sludge in a pit at a distance of minimum 50m from nearby living accn and covering the sludge in the pit with earth and finally spraying unslaked lime, dry, around the septic tank and over the pit complete all as directed (Cost of earth work in the pit is deemed to be included in the unit rate quoted by the tenderer.
Cleaning of blocked drain pipes (SGSW/hume pipe) up to 150 mm bore by rodding from manholes and well flushing with water after cleaning the same all as required including disposing off the deposited sludge, etc inside pipes to a distance exc 50m & n.exc 200 m, burried under ground (minimum 30 cm below ground level) including necessary excavation of pits in soft/loose soil and returning, filling in including sprinkling of bleaching powder at the rate of 0.20 kg / Sqm and dressing of surplus soil around slope all complete all as specified and directed.
All as per Item No 49 above but exc 150mm and n.exc 250mm bore pipes.
Cleaning of manholes including taking out accumulated semi liquid, sludge and other deposits such as broken bricks , silt etc from manholes of depth n.exc 1.5 m, cleaning as directed and removing the same to a distance n. exc 50 m and burried under ground (minimum 30 cm below ground level) including necessary excavation of pits in soft loose soil and returnig, filling in including sprinking of bleaching powder at the rate of 0.20 kg / Sqm and dressing of surplus soil around to slope complete all as specified and directed.
Demolition of brick work, built in cement mortar complete all as specified and directed.
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 using old size bricks as in manholes etc complete all as specified and directed.
M&L for Plain Cement Concrete 1:2:4 type B1 (using 20 mm graded granite stone aggregate) as in cills, benching and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed.
M&L rendering 15mm thick in cement mortor 1:4 on fair faces of brick work and finishing surface even and smooth without using extra cement complete all as specified and directed.
Demolition of RCC n.exc 15cm thickness complete all as specified and directed.
M&L precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slab of manholes, septic tank etc, set in cement mortar (1:4) including necessary form, moulds etc and including taking out/removal of existing unserviceable cover slab from manholes /septic tank complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.
M&L for Mild steel TMT bars 10 mm dia and over as in reinforcement cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and directed .
Demolition and breaking up 150 mm bore drain pipes (SGSW/AC/RCC) set in cement mortor complete all as specified and directed.
Demolition and breaking up 100 mm bore drain pipes (SGSW/AC/RCC) set in cement mortor complete all as specified and directed.
M&L salt glazed stone ware drain pipes NP3 150 mm bore, grade 'A' laid in trenches, jointed and tested complete all as specified and directed.
Cleaning of blocked EWC by using rubber hand pump and opening the eye and making the line clear for smooth function complete all as specified and directed.
Cleaning of blocked IWC by using rubber hand pump and opening the eye and making the line clear for smooth function complete all as specified and directed.
Cleaning of blocked nahani trap in bathroom / kitchen or blocked gully trap by using rubber hand pump and opening the eye and making the line clear for smooth function complete all as specified and directed.
S&F in repairs, 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F in repairs, 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
S&F in repairs, 110 mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F in repairs, 110 mm bore, PVC (SWR) junction double, (Double T) equal or unequal complete all as specified and directed.
S&F in repairs 110 mm bore, PVC (SWR) Soil, waste and vent pipes single socketed, in any length with rubber ring joints laid in floors or trenches etc as required complete all as specified and directed.
All as per Item No 69 above but fixed to walls.
S&F in repair vitreous china squatting pan of orissa pattern long pan size 580 mm x 440mm white including flushing pipe etc complete all as specified and directed.
Excavation in trenches n exc 1.5 deep and n exc 1.5m wide in soft/loose soil for foundations etc and getting out complete all as specified and directed.
Returning filling in incl spreading, levelling watering and well ramming in layers nexc 25cm in soft/loose soil complete all as specified and directed.
Removing excavated material to a distance exc 250m and nexc 500m and depositing where directed at a level n exc 1.5m above the starting point in soft/loose soil complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description and in any position such as in bed for drain pipe etc complete all as specified and directed.
Demolition of existing SGSW gully trap including PCC kerb etc and Supply and Fix SGSW gully trap square mouthed 100mm size set in PCC (1:3:6) type C1 block measuring 450mm and 100mm thick bed concrete and jointing to drain pipe in CM (1:1) including 100x150mm high kerb inPCC 1:2:4 type B1 with cast iron perforated grating 150 x 150mm bituminous coated including disposal of waste/ sludge complete all as specified and directed.
Demolition of PCC around floor trap and dismantling existing floor trap and cleaning the blockage of pipe from floor trap to gully trap and Supply & Fix PVC floor/Nahani trap in existing pipe and embedding in CM (1:1) including lowering or raising with vertical piece with PVC pipe for jointing trap and fixing gratings at true level of floor complete all as specified and directed.
M&L plain cement concrete 1:3:6 type C2 (using 40 mm graded broken stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore drain pipes complete all as specified and directed.
Construction of brick masonary Soakage well, 2.25 meter dia x 3.0 m deep complete all as specified and shown on drwaing (Ref DrgNo. AF/TD/STRU /236 Sheet1/2&2/2) complete all as specified and directed.
KP GHOSH AND CO
HIND CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .