Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.9 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹41.1 L+₹12,907 (0.32%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹41.2 L+₹24,607 (0.60%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | CARE N DELIVER L1 | RAZVI ENTERPRISES L3 | SAMRAT ENTERPRISES L2 |
|---|---|---|---|---|---|---|
| 1.00 | Providing, detailing, composite fabricating members like Trusses, N-girders, girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using M.S. hollow tubular steel sections (circular & rectangular pipes), of TATA Structura Make or equivalent conforming to IS 1239 part 1 and 2 and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportion of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. | 25 | MT | 86,139 ₹21,53,475 Lowest | 86,798 ₹21,69,950 | 86,487 ₹21,62,175 |
| 2.00 | Providing, detailing, fabricating and fixing at desired location using M.S. chequered Plates of any thickness and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transporation of the same to site, erection at all heights and levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. | 5 | MT | 92,515 ₹4,62,575 Lowest | 92,526 ₹4,62,630 | 92,521 ₹4,62,605 |
| 3.00 | 0.63 mm thick GI corrugated sheet with zinc coating not less than 275gm/m² | 900 | SqM | 803 ₹7,22,700 Lowest | 809 ₹7,28,100 | 806 ₹7,25,400 |
| 4.00 | geotextile mat (300 GSM) | 350 | SqM | 73 ₹25,550 Lowest | 76 ₹26,600 | 74.5 ₹26,075 |
| 5.00 | Filling in plinth, floors, trenches, pits with approved excavated Filling in plinth, floors, trenches, pits with approved contractor's murum in layers not exceeding 200mm including breaking of clods, watering, consolidating each layer in filled up area by rolling and compacting with roller/ plate compactor as required to achieve not less than 97% modified proctor density conforming to relevant IS etc. complete as directed by Engineer In charge. The rate includes necessary soil testing charges at laboratory & field as per relevant I.S. codes, royalty, octroi and other taxes if any. (Note: Borrow areas selected by CONTRACTOR shall be got approved from Engineer In Charge, before executing the work) 1) The rate includes the royalty and other taxes if any. | 10 | Cum | 1,036 ₹10,360 Lowest | 1,043 ₹10,430 | 1,039 ₹10,390 |
| 6.00 | Nominal Mix of 1:2:4 (1 cement OPC: 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) | 92 | Cum | 7,229 ₹6,65,068 Lowest | 7,235 ₹6,65,620 | 7,233 ₹6,65,436 |
| 7.00 | 63 Amp. 415V DP Switchfuse unit with CRCA sheet steel powder coated enclosure with rewirable fuses | 2 | Nos | 4,718 ₹9,436 Lowest | 4,825 ₹9,650 | 4,821.5 ₹9,643 |
| 8.00 | 63A DP MCB | 2 | Nos | 1,595 ₹3,190 Lowest | 1,598 ₹3,196 | 1,597 ₹3,194 |
| 9.00 | 32A SP MCB | 2 | Nos | 333 ₹666 Lowest | 337 ₹674 | 335 ₹670 |
| 10.00 | 25A SP MCB | 9 | Nos | 334 ₹3,006 Lowest | 337 ₹3,033 | 335 ₹3,015 |
Tender Value
Refer Docs
EMD Value
₹48,600
Closing Date
28 Aug 2025, 4:00 pmClosed
E.E.Mech.(South)
Office of E.E.Mech.(South)BMC Workshop,Mumbai
As per mentioned in tender document
2025_MCGM_1211839_1
2025_MCGM_1211839_1
Open Tender
Electrical and Maintenance Works
Item Rate
Work
Please refer Tender documents.
3 documents required · 3 mandatory
₹7,800
₹48,600
17 Sept 2025
22 Aug 2025
29 Aug 2025
22 Aug 2025
28 Aug 2025
22 Aug 2025
Amount
Providing, detailing, composite fabricating members like Trusses, N-girders, girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using M.S. hollow tubular steel sections (circular & rectangular pipes), of TATA Structura Make or equivalent conforming to IS 1239 part 1 and 2 and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportion of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.
Providing, detailing, fabricating and fixing at desired location using M.S. chequered Plates of any thickness and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transporation of the same to site, erection at all heights and levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.
0.63 mm thick GI corrugated sheet with zinc coating not less than 275gm/m²
geotextile mat (300 GSM)
Nominal Mix of 1:2:4 (1 cement OPC: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
63 Amp. 415V DP Switchfuse unit with CRCA sheet steel powder coated enclosure with rewirable fuses
63A DP MCB
32A SP MCB
25A SP MCB
1st category Cu armoured cables FRLS outer sheathed- 2C x 6 Sq.mm
1st category Cu armoured cables FRLS outer sheathed- 2C x 2.5 Sq.mm
1st category Cu armoured cables FRLS outer sheathed-2C x 1.5 Sq.mm
Light /Fan / Ex. fan Points with Modular switches & FRLSH wires
SAMRAT ENTERPRISES (BID ID -6839179)
RAZVI ENTERPRISES (BID ID -6836654)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .