COMPREHENSIVE REPAIR TO CERTAIN OTM BLDGS OF MH PATIALA AND VARIOUS BLDG UNDER AGE BR II AT PATIALA MIL STN

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Dismantling asbestos cement (corrugated or semi corrugated, etc) sheets in roof covering complete all as specified. Note: The rates includes rates of scaffolding to work at a height approx 10 mtr of double story . Contractor shall take all necessary safety precautions alongwith insurance cover to his workmen before commencement of work. Unit rates quoted shall deemed to be inclusive of all such factors and nothing extra including compensation to workmen in any manner is payable on this account.Insurance of workers may be done before execution of work by contractor .In case of any mishappening department shall not be held responsible.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete including dismantling, all as sepcified and directed.

S&F pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete, all as sepcified and directed.

M&L for preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete.

S&F MS work in tubular/pipe/angle sections for frame work for roof, vertical poles, s rafters and purlins including washer etc complete all as directed.

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified.

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed

M&L for machine cut kota stone slab as in flooring/Skirting of size 580 x 580 mm each & 18-20 mm thick, set and jointed in cement slurry laid over 15 mm thick screed in CM 1:4 complete all as specified. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

M&L for , vitrified tiles , joint free, premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors/skirting etc. in any pattern of light & dark tiles as approved, laid over 15 mm th screed in CM 1:4 complete all as specified and directed.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for anti-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 7to8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles laid over 15 mm thick screed in CM 1:6 complete all as specified.

M&L Granite 16-18 mm thick work (of any type) (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including nosing edges and chamfered laid over 15 mm thick screed in CM 1:6 complete all as specified

M & L factory made coloured chequred cement concrete tiles 30 cm x 30 cm x 20mm thick,made of grey cement set and jointed in neat cement slurry with grey cement and pigments as in floors to match the shade over screed bed or bedding layer or mortar 15 mm thick in cement mortar 1:4 for laying floor finished, complete all as spcified and directed.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border etc only in tile flooring and the like works and flooring etc, 16-18 mm thick laid over 15 mm thick screed in CM 1:4 including bull-nose the front length, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/ demolition complete all as specified. Note : Single piece should be used in steps/cills/jambs/ shelves.

M&L for Cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base of flooring all as specified and directed.

M & L factory made 60 mm thick rubber moulded, lacqured finished, coloured Machine pressed precast concrete interlocking of M-35 paver block any shape and size confirming to IS 15658 - 2006 filled with grey cement and pigment over including sand cushioning 25mm thick, complete all as specified

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position / height( single storey/ double storey/ tripple storey) by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes, including scaffolding upto tripple storey, complete all as specified and directed.

Demolition of brick work built in cement mortar complete.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement with WPC paid and WPC to be measured separately complete all as specified.

Supply only Water proofing compound complete.

M& L Rendering 10 mm thick in cement mortar 1:6, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified.

M& L Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified.

M& L for Preparation of new plastered surfaces of walls /RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc and applying 02 coats of exterior emulsion paint (light shade) by using roller over & including a coat of exterior wall primer and over a coat of acrylic wall care putty to make the surfaes smooth complete all as specified and directed.

M&L for Preparation of new plastered surfaces of walls /RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc and applying 02 coats of Oil bound distemper by using roller over & including a coat of exterior wall primer and over a coat of acrylic wall care putty to make the surfaes smooth complete all as specified and directed.

M&L for Preparation of new plastered surfaces of Ceiling etc and applying 02 coats of oil bound distemper by using roller over & including a coat of exterior wall primer and complete all as specified and directed.

M& L for Prepration of old plastered/unplastered surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/balcony etc by rubbing down/scrapping down loose/ pealed treatment and applying one coats of exterior emulsion paint (light shade) by using roller to external surfaces over & including repair/filling cracks etc with a coat of acrylic wall care putty to make surfaes smooth, where ever required smooth complete all as specified and directed.

M&L for Prepration of old plastered/unplastered surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers/ balcony etc by rubbing down/ scrapping down loose/pealed treatment and applying one coats of oil bound distemper by using roller to external surfaces over & including repair/filling cracks etc with acrylic wall care putty to make surfaes smooth, where ever required smooth complete all as specified and directed.

M& L for Prepration of old plastered/unplastered surfaces of Ceiling by rubbing down/scrapping down loose/pealed treatment and applying one coats of oil bound distemper by using roller to ceiling surfaces complete all as specified and directed.

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed.

M & L for preparing old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete al as specified and directed.

S&F PVC hollow Wall panelling of thickness 5 mm of any colour/pattern as directed complete fixed to walls in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent beads etc

S&F in repair Poly coated GI Frame work as in grid for False ceiling comprising of protected GI perimeter channel 0.55 mm thick with two uneual flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon selves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having to equal flanges of 15 mm each and web of 45 mm suspended from soffit and approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and hangers 6 mm dia GI (up to 1200 mm length adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x3 mm size 60 mm long complete with and incl 7 mm thick PVC laminated gypsum tiles of size 595x595 mm of approved design complete all as specified and directed by Engineer-in-Charge.

M&L for Powder coated Anodised aluminium frames and shutters for doors, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. Each Door shutter to be provided with following fittings a) Powder coated Al Tower bolt 150 mm - 02 Nos b) Powder coated American type al handle 100 mm - 01 Nos on each leaf c) Powder coated Al Hinges 100 MM - 03 Nos on each leaf d) Hydrulic door closer - 01 No e) Mortice lock 250 mm with two keys - 01 Nos

M&L for Powder coated Anodised aluminium frames and shutters for windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. Each window shutter to be provided with following fittings a) Powder coated Al Tower bolt 150 mm - 02 Nos b) Powder coated D type al handle 100 mm - 01 Nos on each leaf c) Powder coated Al Hinges 100 MM - 02 Nos on each leaf d) Powder coated aluminium hook and eye of suitabel length adjustable -01 Nos

Taking down Aluminium door / window shutters for repairing and re-fixing in same opening including tightening frame etc all as specified and directed as under:- (i) Rectification of open joints by refixing of cleats, tightening of screws (ii) Replacement of unserviceable rubber beading of aluminium door / window shutter glass pannels etc all as specified and directed. (iii) Replacement of unserviceable satinless steel butt hinges (iv) Replacement of unserviceable brass mortice lock of size 75mm with 4 lever complete all as specified and directed. (v) Replacement of unserviceable PVC panel inserts 5mm thick

S&F 12mm thick high density fibre board pre-laminated on both sides (water proof) as in patation/door panels fixed with and including EPDM gasket to render the glazing, air and water tight etc aluminium beading of size as required complete all as specified and directed by Engr-In- Charge

S&F 5mm thick tinted glass for aluminium windows/Door including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete.

S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDm gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete.

S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium door/windows/ ventilators etc complete.

S&F in repairs Sheet glass ordinary quality 4 mm thick and glazing with oil puttly or wooden beads in square exceeding 0.5 sqm in each pane complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame, all as specifeid and directed.

S&F factory made PVC door Frame of size 50mm x 47mm made out of 5mm plain colur PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening, all as specified and directed.

S&F 100 size PVC butt hinges all as specified

S&F 125 mm PVC handles all as specified and directed

S&F 200 mm long PVC tower bolt all as specified and directed.

S&F factory made Pressed steel frames made of MS sheet of 1.20mm thickness of size 105 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items).

S&F factory made Pressed steel frames made of MS sheet of 1.20mm thickness of size 125 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items).

S&F factory made flush shutters 30mm thick, BWP conforming to IS: 2202 (Part-I) non-decorative type, core of block board construction with frame of Ist class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including two cats of SE paint over a coat of pink primer complete all as specified and incl supply and fixing following items:- (a) Mild Steel Butt Hinges 150mm - 3 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf

S&F 30mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth ( 0.36mm nominal dia of wire and average width of aperture 1.40 mm ) and including two cats of SE paint over a coat of pink primer also incl supply and fixing following items:- (a) Mild Steel Butt Hinges 150mm - 3 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf

S&F Stainless steel of 25mm bore as in curtain rod complete incl fixing fancy type brackets, stops etc all as specified & directed as in repair (For the purpose of measurement and payment running length of curtain rod only shall be considered).

Rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position incl 20 mm ball cock, connecting to inlet or outlet and washout including disconnecting and demolition of existing tanks of any description.

S&F vitreous china premium/1st quality wash basin, white/ivory/off white, flat back, size 550x400 mm with brackets etc. all accessories as recommended by manufacturer with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.

S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, CI 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor all as specified

S&F in repair PVC 10 litre capacity valve less syphonic action type, flushing cistern, low level, white/coloured with inlet ball valve, float, pvc bend and handle including brackets, etc. complete all as specified by Engineer in Charge.

S&F Vitreous china urinal, stall type, of size 330x300x450mm incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, waste coupling 32mm , bottle trap, pointing urinal back in cement; connection for discharge pipe incl necessary packing,union and 15mm CP urinal spreader and CP connection pipe complete all as specified.

S&F PVC waste pipe for sinks, wash basins, urinal etc of length 900 mm complete.

S&F in repair 5mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws aluminium bedding on sides etc. chrome finish with aluminium bedding on sides over 3mm ply, etc.complete fixed in position all as specified and directed.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing complete in all respect all as specified and as directed.

S&F in repair health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair Angular Stop Cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F in repair fancy type, chromium plated long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete.

S&F in repair stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified .

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ctc complete all as specified.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.

Repairing/rectifying complaits of alredy insallted sensor urinals of any make /shape, including supply of parts required to make the urinals functional complete in all respect all as specified and as directed by Engr-in-charge.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15 mm bore complete all as specified.

S & F in repair brass shower rose 125 mm size (Chromium plated) with swivel joint complete, suitable for 15 mm bore iron pipe complete all as specified.

S&F 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required including all necessary fittings (patches, connectors, brackets etc) all as specified and directed

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete.

S&F stainless steel of grade 304, chromium plated glass door lock complete all as specified and directed

S&F stainless steel of grade 304, chromium plated a pair of H type handle of 32 mm dia and length 300mm as specified and directed

S&F in repair PVC(SWR) rain water pipes, 110 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc as in repairs after taking down existing damaged CI rain water pipe including P or S Tees traps complete all as specified and as directed

PVC (SWR) bends/tees of any radius for 110mm bore complete all as specified.

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, piece of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH(FLAME RETARDANT LOW SMOKE AND HALOGEN) single core multi-stranded copper conductor for one light/fan and including PVC rigid concealed conduit medium grade 19/20 mm dia, chesing and cementing work to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment required for fitting of flush and junction boxes all as specified and directed (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring)

All as per Sl item No 82 above herein before but one 5Amp socket point on independent board but with other switches complete all as specified and directed. Make of Wire: Havells/Finolex/Polycab

All as per Sl item No 82 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.Make of Wire: Havells/Finolex/Polycab

All as per Sl item No 82 above herein before but one socket out let 3 pin 15 Amp Independent with 2.5 sqmm wire including 2.5 sqmm PVC insulated and unsheathed FRLS single core stranded copper earth continuity conductor complete all as specified and directed. Make of Wire: Havells/Finolex/Polycab

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH(FLAME RETARDANT LOW SMOKE AND HALOGEN) single core multi-stranded copper conductor for one light/fan in existing conduit to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed. (Switches and regulators shall be measured and paid for separately.) (Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring). NOTE:-1.The contractor must produce certificate of FRLSH wire as well as on site testing of FRLSH wire. .

All as per Sl item No 86 above herein before but one 5Amp socket point on independent board but with other switches complete all as specified and directed.

All as per Sl item No 86 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per Sl item No 86 above herein before but one socket out let 3 pin 15 Amp Independent with 2.5 sqmm wire including 1.5 sqmm PVC insulated and unsheathed FRLS single core stranded copper earth continuity conductor complete all as specified and directed.

S& F Modular switch 1 way, 6 Amps, 1 module complete all as specified and directed.

S & F Modular switch 1 way, 16 Amps, 1 module with indicator lamp complete all as specified and directed.

S & F Modular socket 5 pin 6 Amps, 2 module complete all as specified and directed.

S & F Modular socket 5 pin 6/16 Amps, combination type 2 module complete all as specified and directed.

S & F fan regulator modular type 2 module 6 step complete all as specified and directed.

S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed.

S&F incl taking down 20 watt wall mounted, new generation LED batten fitting 4 feet with polycarbonate diffuser andextruded thermoplastic body > 90 lumen/watt having correleted color temperature(CCT) of Emitting light 6500/3000 K with CRI of LED >90 . including all fixing accessories & connecting up with PVC insulated twin core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix incl taking down 36 watt recessed mounted LED luminaire suitable for armstrong/grid ceiling with super bright LED fittings minimum 100 lumen/watt with connector block etc with short circuit protection , open protection , reverse polarity protection , high voltage protection complete with all accessories pre wired having correleted color temperature(CCR) of Emitting light 6500 OR 3000 K(According to requirement) with CRI of LED >90. and including cconnection with twin core twisted flexible copper conductor cable .75X2 Sqmm complete all as specified and directed.

Supply and fix incl taking down Led Stellar Square/round recessed Mounted slim and and Elegant Downlight /Panel for indoor application with high aesthetic appeal of capacity 12 watt, minimum 100 lumen/watt having correleted color temperature(CCR) of Emitting light 6500 OR 3000 K(According to requirement) with CRI of LED >90.complete with all electrical connection up with PVC insulated twin core flexible copper conductor cable of suitable sizecomplete all as specified and directed.

S&F MCB DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 8 ways with IP43 protection complete all as specefied and directed. (Note: MCB should be C curve as directed by engineer in charge)

S&F MCB , SPN, 240 Volt , 40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed. (Note: MCB should be C curve as directed by engineer in charge).

S&F MCB, single pole 240 volts 6 to 32 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. (Note: MCB should be C curve as directed by engineer in charge)

S&F MCB, single pole 240 volts 40 to 63 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. (Note: MCB should be C curve as directed by engineer in charge)

S&F MCCB DB VTPN 4 WAYdouble door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for ways with IP54 protection complete all as specefied and directed. (Note: MCCB should be C curve as directed by engineer in charge)

S&F MCCB DB VTPN 4 WAYdouble door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for ways with IP43 protection complete all as specefied and directed. (Note: MCCB should be C curve as directed by engineer in charge)

Supply and fix metal clad Box of single phase 220V with built in socket and plug of capacity 20 amp complete all as specified and directed.

S&F MCCB , TPN, 240 Volt , 125 amp for fixing in DBs of including proper thimble connections complete all as specified and directed. (Note: MCCB should be C curve as directed by engineer in charge)

S&F MCCB , TPN, 240 Volt , 63 to 100 amp for fixing in DBs of including proper thimble connections complete all as specified and directed. (Note: MCCB should be C curve as directed by engineer in charge)

Earthing complete with galvanised steel earth plate electrode, 600x600 x 6.0mm thick buried directly in ground(earth pit not less than 2.25m deep below normal level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No 3 of SSR Part I. Connected to earthing test point testing complete including necessary earth pit chamber PCC 1: 3: 6 type C1, and 50mm thick RCC 1 : 2: 4 chamber cover and with 8mm dia mild steel re-enforcement of 15Cm C/C spacing both ways with a handle made of 8 mm bar for fitting, galvanised iron funnel, wire mash watering pipe GI 20 mm dia light grade, and protection to earth lead shall be provided with GI pipe light grade 15mm dia up to 7.5m from the earth plate electrode, excavation, charcoal and common salt mixed refilling of soil etc complete all as directed. Test Sheet having Earth resistance value less than 3 ohm will be submitted by contractor complete all as specified and directed by engineer in charge.

M & L for Sub main wiring with four single core 10.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 10 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 4 Runs of 10.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 2 Run of 10 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

M & L for Sub main wiring with two single core 10.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 10 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 10.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 10 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

M & L for Sub main wiring with two single core 2.5 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 2.5 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 2.50 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 2.5 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

M & L for Sub main wiring with two single core 1.5 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 1.5 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 1.50 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 1.5 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

Supply and fix incl taking down new generation energy saving 9/10 watt LED bulk head (porch light fitting) made of plasitic housing with opal diffuser With IP 65. having correleted color temperature(CCR) of Emmiting light 6500/3000 K with CRI of LED >90. connection with PVC insulated twin core flexible copper conductor cable of suitable size.complete all as specified and directed.

M&L switch piano flush type single pole, one way 6amp complete all as specified and directed.

M&L switch piano flush type single pole, one way 15 amp complete all as specified and directed.

M&L socket outlet piano flush type 2 in 1 3 pin 5 amp complete all as specified and directed.

M&L socket outlet piano flush type 3 pin 15 amp complete all as specified and directed.

S/fix fan regulator electronic socket type complete all as specified and directed.

S&F modular white/grey cover plate with frame, 1 module/2 module complete all as specified and directed.

S&F modular white/grey cover plate with frame, 3/4module complete all as specified and directed.

S&F modular white/grey cover plate with frame, 6 module complete all as specified and directed.

S&F modular white/grey cover plate with frame, 8 module complete all as specified and directed.

S&F Metal Flush boxes 1/2 module complete all as specified and directed.

S&F Metal Flush boxes 3/4 module complete all as specified and directed.

S&F Metal Flush boxes 6 module complete all as specified and directed.

S&F Metal Flush boxes 8 module complete all as specified and directed.

S&F BUZZER DING DONG AC 230Volts single pole complete all as specified and directed.

Supply and fix batten holder including flexible wire complete all as specified and directed.

S&F incl taking down 12 watt LED Bulb with base cap B22/E27 type minimum 90 lumen/watt having correleted color temperature(CCT) of Emitting light 6500 /3000 K with CRI of LED >90 complete all as specified and directed.

S/Fix in replacement of old MCB DB TPN 4 Way with 200Amp standerd bus bar factory made IP 43 protection class metal double door with Shrouded Neutral Bar & Pan assembly with connecting link complete including Provision for fixing one MCB TPN upto 125A complete all as specified and directed. (MCB TPN will be measured and paid separately under respective items of sch A)

S&F MCB TPN 240 volts 63 to 100 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. (Note: TPN should be C curve as directed by engineer in charge)

S&F incl taking down 20 watt wall mounted, new generation alluminium BATTEN SUITABLE FOR LED T-8 Retro fit for multipuspose application with 20 Watt LED Rod 4 feet > 90 lumen/watt , made from extruded aluminium housing, polycarbonate diffuser having correleted color temperature (CCT) of Emitting light 6500/3000 with CRI of LED >90. including all fixing accessories & connecting up with PVC insulated twin core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F incl taking down 18 Watt LED tube Rod 4 feet T-8 Retro fit >90 lumen/watt made from polycarbonate diffuser and polycarboneted body having correleted color temperature(CCT) of Emitting light 6500/3000 K with CRI of LED >90. complete all as specified and directed.

Supply and fix incl taking down Led Stellar Square/round SURFACE Mounted Asthetically designed energy saving LED LIGHT for indoor application of capacity 10 watt having correleted color temperature(CCR) of Emitting light 6500 OR 3000 K(According to requirement) with CRI of LED >90.complete with all electrical connection with PVC insulated twin core flexible copper conductor cable 0.75X2 Sqmm with proper clamps.complete all as specified and directed.

Supply and fix incl taking down outdoor decorative LED Post top lantern with spun aluminium die cast Housing cum heat sink PMMA diffuser in IP65 fitted LED lightf of capacity 40 watt. complete all as specified and directed.

Supply and fix incl taking down outdoor decorative LED Post top lantern with spun aluminium die cast Housing cum heat sink PMMA diffuser in IP65 fitted LED lightf of capacity 20 watt. complete all as specified and directed.

Supply and fix incl taking down LED garden light fitting with LED bulb upto 20 watt E27/B22 base cap fitted on the piller with the help of GI pipe/PCC up to 550 mm height nut bolts and in stainless steel housing with clear acrylic cover in top section with IP 65 protection class ,connection with 1.5 sqmm 3 core copper cable upto 1.5 RM including making suitable PCC foundation and all electrical connection complete all as directed.

Supply and fix LED active power factor correction (APFC) electronic gear (electronic driver) suitable for 25 watt LED light fitting O/P current upto .6A output voltage 23-36V power factor >.90 complete all as directed.

S&F PVC insulated copper conductor 3 core 1.5sqmm passing through flexible PVC conduit and fixed with clamp. complete all as specified and directed. NOTE:-cable and flexible conduit both included in quoted rates.

S&F Alluminium armoured cable 2 core 6 sqmm with PVC insulated.fixed with clamps complete all as specified and directed.

Supply and fix in replacement of 9/12 watt LED light fitting decorative type wall mounting fixture including LED lamp compact and energy efficient epoxy powder coated luminaire, white metal swing Arm Wall lamp with Bulb and connecting with copper conductor flexible cable from ceiling rose to conector of the light complete all as specified and directed by Engr-in-charge.Make Philips/Havells or equivalent

Arneja Builders (BID ID -3399567)

Buttar Construction Co. (BID ID -3401941)

AR CONSTRUCTIONS (BID ID -3401838)

Jawandha Enterprises (BID ID -3409511)