REPAIR TO FLOOR, PLASTER, JOINERY INCLUDING DAY TO DAY MAINTENANCE PLUMBING WATER SUPPLY FITTINGS GLASS PANES WATER TANK IN OTM ACCN AT Y STN UNDER GE SATWARI

Amount

Note :- 1. Work will be carried out upto 4th storey of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account. 2. Contractor should also resolve the day to day problems/ complant related to item no 02 to 164 in piece meal as per requirement and give the feedback to the Engr-in-charge within next 24 hours about the work done and complete site will not be vacated for the same, only requirement basis site for work will be handed over and work will be carried out up to 4th storey. 3. The contractor shall be provided with space for setting up maintenance cell at the specified location as per the directions of engineer in charge which shalled be manned by the supervisor responsible for collecting complaints from the concerned JE/AGE. However, no additional payment other than those measurable below shall be made to the contractor. The recovery for non-complaince shall be made as per provisions given in Sch 'A' notes.

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and removing from the site all as specified & directed.

Taking down shutters of any description exc 2.00 Sqm each and removing from the site all as specified & directed.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.

Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr as specified.

Demolition of reinforced cement concrete of any discription ground to 4th floors and removing unserviceable material exc 100 mtr as specified.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified,and removing unserviceable material outside the premises.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Dismantling of ceiling board(Fibre,pulp,,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets

Dismantling timber scantlings 40 sq. cm and over in section, in any position ( framed work) complete all as specified.

Ditto all as per item No 12 in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section framed Work) all as specified.

S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd.

S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd.

M&L 35 mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), complete all as speciied.

S&F 35mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads.

M&L 2nd class H/W plain solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

M&L Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Note:- Sample approved by Engr-in-Charge or GE.

S&F 35 mm thick factory made moulded door shutter cinsisting of solid core single leaf flush door of 30 mm thickess, lipped with 15 mm (5x3mm) thick x 30 mm width on one stiles and top rails &10 mm (5mmx2) thick x30 mm width on the order stiles & bottom rail. The inner panel laminated with 2mm thick PVC sheet of Density 600 Kg/Cbm, Manufactured by an ISO-9001-2015 certified complany, termite proof, water proof and fire resistant moulded PVC sheet with2,4,6 raised panel design in different plain and/ or prelam colours on one side after routing the mouided design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubbed based adhesive on flush door & solvent cement adhesive on the PVC liping etc, complete as per direction of Engr-in-charge.

S&F in repair Soild PVC door frame of size 50 mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S & Fix in repair Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.

Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately.

S & F in repair continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)

Material & labour for block board, grade 2 quality, interior grade, commercial type18/19 mm thick, kitche, cup board shutters/shelves etc , fixed to frame work with leaping (15 mm thick three side and 20mm thick leaping hinge side) around the shutter and fix with screws to etc complete all as specified and directed.

S & F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.

S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)

S&F Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked)

S&F Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified. (ISI Marked)

Mild steel sliding door bolt plate type stove enamelled black, with bright bolt not less than 12 mm with and including a minimum of 6 boltsand nuts on staple plate size 250mm long complete all as specified

S&F aluminium hanging floor door stopper,Twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

S & F Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 8 mm dia. 100 mm Size.

S&F in repair aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

S & F in repair mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified.

Repair/ easing of wooden door any type, glazed or panelled, by triming the side of door shutter where rubing with chowkhat, unscrew the hinges screws and lift the door and fix with screds, titening of wire mesh etc all as per Engr-In-Charge.

Material and labour for (a) repairing aluminium shutters including refixing, tightening and making good with using rubber/beads and others small fixtures/fittings (door handles, door stoper etc), if required and making serviceable all as specified and directed by Engr-in-charge.

(b) Aluminium door locks ( Sample approved by Engr-in-charge)

S&F in repair 25 mm outer dia stainless steel thickness 20 gauge ( Min weight 0.30 Kg/Rm, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings),complete all as specified and as directed by Engineer-In-Charge.

S & F for Aluminium anodised powder coated door shutter, rails of size 82.53 x 44.45mm and bottom rail of size 114.30 x 44.45mm made out of 1.20 mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, mortice lock having six levers, aluminium body hydraulic door closer of suitable size, handles 2 No's in each shutter, tower bolt, hinges etc.,anodised aluminium snap beading screws, complete all as specified. Note: sheet glass to be fitted will be measured and paid separately.

S & F Aluminium anodised powder coated window/ventilator shutter, section of size 44.45 x 44.45mm made out of 1.20 mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, suitable handle 1 No's in each shutter, tower bolt, hinges 110mm long ,anodised aluminium snap beading screws, complete all as specified. Note: Sheet glass to be fitted will be measured and paid separately.

S & F Aluminum anodized powder coated frame of size 101.60 x 44.45 made out of 1.20mm thick aluminum section fixed to floor/wall with plugs and screws complete all as specified and directed

Supply and fixing 5.00 mm thick (minimum) glass sheet ordinary quality frosted and glazed in squares, exceeding 0.5 Sqm in each pane.

S&F in repair Brass Mortice lock with brass handles and fittings , 4 lever vertical type, size 65 mm including complete accessories complete all as specified.

Supply and fixing in repair double action door spring hydraulically regulated (heavy duty) made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty. (ISI Marked)

S&F steel window 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm double rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication, including Square bar gril, specing of gril 100 mm center to center and fixing arrangement as per drg No CEPZ/TD-324,325/0 ( Note Grill/ guard bar , glass pan and wire mesh measured and paid seprately )

S&F steel Ventilator ( N exc 0.70 Sqm) 1.25 mm thick Box type (Double Shutter) ERW hollow P section of size 60 mm x 25 mm double rebated comprises glazed & wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window incl following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication including Square bar gril, and fixing arrangement as per drg No CEPZ/TD-324, 325/01&2 ( Note Grill/ guard bar , glass pan and wire mesh measured and paid seprately )

S&F Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, gate , guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.

Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.

S&F 3 mm thick sheet glass ordinary quality glazing with steel pins, sealant silicone paste to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, all as specified.

S&F 3 mm thick figured glass, pin head type and glazing with sealant silicone paste in square n.exc 0.5 sqm in each pane.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repair Bib tap long body 15 mm bore, standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). Complete all as specified. Make : Prayag, Jainko, Polytuf

S&F in repair wash Basin Mixer, fancy type complete all as specified. Make:- Essco, cera, Jainko

S&F in repair CP piller cock with 450mm, 15 mm bore fancy type complete all as specified and directed by Engr-in-charge/ GE. Make:- Essco, Jainko, cera

S&F in repair angle valve with wall flange , cast copper alloy, chromium plated fency type screwed for 15 mm iron pipe, complete all as specified. Make:- Essco / Jainko/Cera

S&F in repair CP Bib taps, cast copper alloy with capstan head , screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified. Make:- Jainco/ Essco/ Cera .

S&F in repair Concealed Stop Cock Heavy Body Casted Cap 15 mm complete all as specified. Make:- Essco/ Jainko/ Cera

S&F in repair Single Lever Wall Mixer 3-in-1 System with Provision for Both Hand Shower & Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (Without Hand & Overhead Shower) fancy type complete all as specified. Make:- Jaguar, Cat No-OPP-15125PM or equivalent in kohler/ Artize.

S&F in repair angular stop cock with wall flange , cast copper alloy, chromium plated fency type screwed with wall flange sutable for 15 mm iron pipe, complete all as specified. Make:- Jaquar, Cat No:-OPP-15053PM or equivalent in kohler/ Artize.

S&F in repair Bib Cock with Wall Flange cast copper alloy, chromium plated fency type screwed with wall flange sutable for iron pipe, 15 mm bore complete all as specified. Make :- Jaquar, Cat No:- OPP-15037PM. or equivalent in kohler/ Artize.

S&F in repair Hand Shower 120mm dia Round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified. Make :- Jaquar, Cat No- HSH-CHR-1731 or equivalent in kohler/ Artize.

S&F in repair Sink Mixer with Swinging Spout (Wall Mounted Model) with Connecting Legs & Wall Flanges complete all as specified. Make:- Jaquar, Cat No- CQT-23309 or equivalent in kohler/ Artize.

S&F in repair Sink Cock with Swinging Spout (Wall Mounted Model) with Wall Flange complete all as specified. Make:- Jaquar, Cat No:- CQT-23347 or equivalent in kohler/ Artize.

S&F in repair CP Urinal Valve Auto Closing System (sensor based) with Built-in Control Cock & Wall Flange. Make:- Jaquar or equivalent in kohler/ Artize.

S&F in repair Cromium plated, minimum 20 mm dia, single towel rail 600mm long complete all as specified. Make:- Jaquar/ Escco/Jainko.

S&F in repair Cromium plated, towel ring square, complete all as specified. Make:- Jaquar/ Escco/Jainko.

S&F in repair CP soap dish holder complete all as specified. Make:- Jaquar/ Escco/Jainko.

S&F in repair cromium plated toilet roll holder, complete all as specified. Make:- Jaquar/ Escco/Jainko.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail complete all as specified. Make:- Jaquar/ Escco/Jainko.

S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. Make:- Jaquar/ Escco/Jainko.

S&F in repair cromium plated towel rack 600mm long without lower hangers, complete all as specified. Make :- Jaquar or equivalent in kohler/ Artize.

S&F in repair Overhead Shower 125 mm dia round shape single flow with shower arm , complete all as specified. Make:- Jaquar/ Escco/Jainko.

S&F in repair Overhead Shower 200X200mm dia round shape single flow (ABS Body Chrome Plated with Gray Face Plate) with rubit cleaning system complete all as specified. Make :- Jaquar, Cat No-OHS-35497 or equivalent in kohler/ Artize.

S&F in repair Shower Arm Casted 190mm Long Light Body Round Shape for Wall Mounted Showers with Flange & 100 mm long CP nipple complete all as specified. Make :- Jaquar, Cat No- SHA-CHR-483 or equivalent in kohler/ Artize.

S&F in repair Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set,Cistern fittings, Size: 660 x 365 x 765mm, S Trap-300mm complete all as specified. Make :- Cera, Cat No- S1013105 or equivalent in Hindware , Jaquar.

S&F in repair Urinal with complete accessories Set, cp waste cuppling, waste pipe, sprader etc. Size: 375 x 390 x 590mm complete all as specified. Make:- Cera, Cat No- S4020112 or equivalent in Jaquar , Hindware .

S&F in repair Urinal with complete sensor set and accessories, and cp waste cuppling, waste pipe, sprader etc. Size: 360 x 330 x 740mm complete all as specified. Make:- Cera, Cat No- S4010101 or equivalent in Jaquar, Hindware .

S&F in repair urinal sprader cpmplete all as specified complete. Make:- Cera, Cat No- F8070201 or equivalent in Jaquar/kohler/ Artize.

S&F in repair Urinal partition fixing accessories complete all as specified. Make:- Cera, Cat No:- S4090101 or equivalent in Jaquar , Hindware , .

S&F in repair cromium plated bottle trap (with internal partition) 32mm size with 250mm & 190mm long wall connection pipe & wall flange., complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-769L250X190 or equivalent in kohler/ Artize.

S&F in repair under counter basin with fixing accessories set, size: 560 x 470mm, Oval shape, including CP cuppling and PVC waste pipe complete all as specified. Make :- Cera, Cat No- S2030104 or equivalent in Jaquar/ Hindware/Parryware.

S&F in repair Wall Hung Basin with Fixing Accessories Set, Size : 510 x 400mm, including cuppling and pvc waste pipe complete all as specified. Make :- Cera, Cat No- S2040101 or equivalent in Jaquar/ Hindware / Parryware.

S&F in repair full pedestal for WHB complete all as specified. Make :- Cera, Cat No- S2090101 or equivalent in Hindware , Parryware .

S & F in repair PVC flushing cistern 10 ltrs capacity valve less symphonic action type low level complete with inlet valve handles incl brackets, chromium plate brass flush pipe 32 mm dia PVC connection and incl taking down old l cistern comp all as spd.

S&F in repair Vitreous china wash down water closet ( pedestal pattern ) white colour, Size(520x360x390) with 'S' trap, closed pattern with flat bottom, including seat cover complete all as directed. Make:- Cera, Cat Part No- S1053101 or equivalent in Hindware , Jaquar, Parryware.

Supply and fixing PVC Seat cover for EWC pan (White ) of standardd quality including hinges bolt etc all as directed by Engr-In-Carge. Make: CERA, Hindware, parryware.

Supply and fixing PVC Waste pipe 32mm bore for required length complete with waste coupling . Make: Prayag/ Jainko or equivalent

Supply and fixing PVC Waste pipe, sutable for urinal, 50/40 mm bore for required length complete all as specified. Make: Prayag/ Jainko or equivalent

M&L 18 to 20 mm thick Granite black (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

M&L for Reinforced cement concrete 1:2:4 (nominal mix) as in slabs supported on walls, beams and coloumns and the like slab laid in slops all as specified and directed.

S&f mild steel deformed bars 10 mm dia and over cut to length bent to shape required including cranking hooking ends & binding with and including MS wire (annealed) not ness than 0.9 mm dia etc. all as spfd.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.

M&L for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.

S&F in repair Jet Spray (Stainless Steel) with 1 meter PVC Tube complete all as specified. Make:- Essco, Ceara, Hindware .

S&F in repair cromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook, complete all as specified. Make :-- Essco, Ceara, Hindware .

S&F in repair WC Orissa pattern white with integral foot rest 510 x 410 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition) Make:- Cera, Cat Part No-S3010109 (COVYNA) or equivalent in Hindware, Parryware .

S&F in repair PVC connection 15 mm x 450 mm including PVC check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Prayag, Cat No:- 323 or equivalent in Essco/Jaquar.

Dismantling/ disconnecting/ demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) and removing from site or refixing in position.

S & F white colour rotational moulded polythylene water storage tank with float valve, plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 ltrs incl making connections complete all as specified.

S&F in repair rotational moulded polyethylene water storage tanks with float valve, plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltr incl making connection completed all as specified. Make:- Sintex/ Kishan.

S&F in repair Stop valves, (sutable for 25mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)

S&F in repair Stop valves, (sutable for 20 mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)

Supply and fixing float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of bore 20mm. ( including necessary fittings)(Min weight 210gm).

S&F PVC tank cover for 500/1000 ltr PVC water tank fix with necessary fittings complete all as specified and directed by Engr-in-charge.

Disconnecting of water tank of 1000 ltr capacity setting aside (or lowering if required) cleaning and removing all scale and dirt etc etc from tanks and from mouths of pipes etc. scrapping silt, scale, fungus with wire brush from water tanks and removing all scale and dirt etc from water tanks and removing water to a distance 50 meters from the building, cleaning the tank with fresh water, cleaning the mouth oh pipe, refixing all G.I fittings and float valve, making functional all out going G.I connections from tanks and float valves and marking the date of cleaning with white paint on tanks for, cleaning and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Takind down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel all as spfd.

Takind down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel all as spfd.

S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors. Make:- Jindal/ Prakash Surya

S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors. Make:- Jindal/ Prakash Surya.

Fixing only 20 mm dia tubes, any grade, to walls and ceilings or laying in floors.

S&F in repair stainless steel gratings dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement.

Taking down CI/PVC pipes 100 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

S&F PVC (SWR) Type-B, pipes single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B pipes single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or on wall complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, fix in wall complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B bends, 75 mm any radius complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B bends, 110 mm any radius complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B junction single, 75mm (Single T) equal or unequal complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B junction single, 110 mm (Single T) equal or unequal complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B, floor trap, (75mm diameater for outlet in mm), plain with grating including jointing with solvent cement complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B multi floor trap with grating including jointing with solvent cement (75mm diameater for outlet in mm) complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR)Type-B gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B vent cowl 75 mm dia complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B reducers 110 mm dia complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B branch piece, 110 mmm bore, single (single Y) equal or unequal cpmplete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B branch piece, 75 mmm bore, single (single Y) equal or unequal cpmplete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B 'P’ trap 110 mm, complete all as specified. Make:- Astral, Supreme, Finolex.

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

M & L Glazed digital ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick CM 1:4 all as specified. Make : Somany, Kajaria, Orient ( sample as approved & kept in GE's sample room)

M&L Non - skid digital, anti scratch, anti fungus, Ceramic joint less colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over 15mm thick screed bed in C:M 1:4. Make : Somany, Kajaria (sample as approved & kept in GE's sample room)

M&L Non - skid digital, anti scratch, anti fungus, Ceramic joint less colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting dado , etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 10 mm thick backing coat in C:M 1:4. Make : Somany,Kajaria ( sample as approved & kept in GE's sample room)

M& L Virified Ceramic (double charged) any shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. using 4 mm spacers set and jointed in neat cement slurry and pointed in white or coloured tile epoxy grout as per the manufacturer specifications to match over and including 15 mm thick screed bed in C:M 1:4. Make : Somany, Kajaria

M& L Virified Ceramic (double charged) any shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting, dado etc. using 4 mm spacers set and jointed in neat cement slurry and pointed in white or coloured tile epoxy grout as per the manufacturer specifications to match over and including 15 mm thick screed bed in C:M 1:4. Make : Somany, Kajaria

M&L 25 mm thick PCC 1:2:4 type B-1 using 20 mm stone aggregated as in floor finished rough.

Supply and fixing in repair GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 7 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid including taking down of old us material complete all as specified and directed by Engr-in- Chage. Make: Gyproc, Lafarg Boral Gypsum India, India Gypsum, Armstrong

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410- W(Gde- E-250) quality-B

S&F in repair Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

S&F in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

S&F in repair second class hard wood timber scantling fixed , wrought, complete all as specified and as directed.

S & F in repair for framed mirror of Size- 800x600 mm best quality glass approved size, fix as per manufacturer instructions complete all as specified. Make : Cera Cat No. B3510143 or equivalent in list of makes.

S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x 203mm & bowl size 405mm x 354mm x 203mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make:- Prayag, Cat No- 1239D & equivalent in Cera, Nirali.

M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth with out using extra cement all as specified.

M&L for rendering 15 mm thick in CM 1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces).

Material and labour for rendering 5mm thick in CM (1:3) as in ceiling finished even and smooth w/o using extra cement all as specified and directed

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified

M & L for preparation of old rusted corrugated sheets upto 6.00 mtr height ,by brooming with wire brushing and sand paper, applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified.

M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

M&L for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and where requered to make surface even and smooth.

M & L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of oil bound distemper on old decorated wall surface including necessary filling of wall care putty on uneven surface as and where required.

M & L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of synthetic enamal paint on old decorated wall surface including necessary filling of wall care putty on uneven surface as and where required.

M L for preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.

M L for preparation and complete removal of exixting treatment of old plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.

M&L for preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.

M & L for preparation of new plastered/concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.

M & L for preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation.

M & L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.

M & L for preparation of new wall surface , Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots & rubbing with sand paper and and applying one coat of white wash on ceiling.

M/S Raman Construction Co.

M/S PARAMJEET SINGH