SPECIAL REPAIRS TO BLDG NO XXX/1C AT (AT LINES) UNDER GE CHENNAI

Amount

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for flyash brick work with old size bricks straight or curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed.

M & L for Brickwork with fly ash bricks ,straight or curved in any radius in half brick thick walls built in cement mortar 1: 4 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1 mm thick putty complete all as specified and as directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 mixed with water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY

Supply only Liquid water proofing compoud

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger.

M & L for complete removal of existing treatment on wall surfaces and washing, rubbing down and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1 to 1.5 mm thick wall care putty on old surfaces of wall complete all as specified and as directed.

M & L for preparing new surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M & L for preparing old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Material and labour for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of old plastered surfaces of walls all as specified and as directed. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger.

M&L for rendering 5mm thick in CM 1:3 on ceiling area on fair surfaces of concrete surfaces complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement complete all as specified and directed.

Roughening surfaces of old concrete floor/ brick wall or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

All as per item No. 21 above but on skirting/dado including backing coat of 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L PCC 1:2:4, Type B1 (using 20 mm graded stone aggregate), 25 mm thick, as in levelling course complete all as specified and directed

M&L Granite (of any type) slab 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and moulding the edge, hole for gas pipe and polishing complete as in cooking platform including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed.

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M & L for galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing with staples on snap grid by means of GI wires not less than 4mm dia hooks and raw plug etc centre of make. GYPTECH /ARMSTRONG or equivalent including taking down existing false ceiling with frame work any type complete all as specified and directed.

S&F for Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections confirming to Fe 410-W(Gde-E- 250)quality-B complete all as specified and directed.

Dismantling timber scantlings 40sq. cm and over in section, in any position un framed work including filling the voids of embedded portion of wood into the wall with PCC 1: 2 : 4 (20 MM graded aggregates) including finished the surface smooth and even complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area nexc.1.5 sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exceeding 1.5 sqm and not exceeding 4.00 Sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exc. 1 sqm but not exc. 2 sqm each including builders hardware complete all as specified and as directed.

Taking down door shutters of any description exc 1 Sqm and n.exc 2 Sqm and refixing in the same opening after laying floor tiles and making necessary alterations to the size of shutters to suit with the door opening to the required height all as specified and as directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L for 35mm thick second class hard wood Glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

M&L for 30mm thick second class hard wood Glazed and skeleton window shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F 2nd class hard wood panelled shutters 35mm thick, plain framed (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS :1003(Part-I), kiln seasoned and chemically treated and fitted to chowkats complete all as specified and as directed.

S&F figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane (any thickness, size, quality or description ) to wooden/aluminium frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and directed.

M & L for MS work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, including fencing post etc., and similar conforming to grade Fe-290 Grade 165 complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials treating ends of posts, back of chowkats etc with tar or coal tar black paint area exc 0.1sqm but n.exc 0.5sqm each complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials treating small articles such as hold fast etc with tar or coal tar black paint area n.exc 0.1sqm each complete all as specified and as directed.

M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M & L for applying two coat of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 Cm girth or width complete all as specified and as directed.

M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 Cm girth or width all as specified and as directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame as per specification and drawing and all as directed.

S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Thickness of powder coating not less than 50 micron) complete all as specified and as directed.

M&L for Prelaminated particle board 18/19 mm thick exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws as in cupboard shutter and shelves etc fixed in repairs including Ist class hard wood bedding all around the shutter and paints with synthetic enamel paint to beading complete all as specified and as directed.

S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc. complete all as specified and directed.

S&F Butt hinges, 75mm size medium weight cold rolled mild steel Etc. complete all as specified and directed.

S&F extruded Aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and directed.

S&F extruded Aluminium alloy handles fabricated type anodised 100 mm size complete all as specified and directed.

S&F extruded Aluminium alloy handles fabricated type anodised 75 mm size complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and directed.

S & F 300mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F continuous (piano) hinges mild steel, bright finish or electro galvanised width of flaps (when open) in mm 30mm as fixed complete all as specified and as directed.

S&F Ball catches with 8mm dia steel ball and brass body and skirting plate including letting in and fixed overall length of cover plate 150mm complete all as specified and as directed.

S&F in repairs 20mm dia mild steel CP curtain rod with brackets, stops rollers etc complete all as specified and as directed.

M & L Gate and shutter hooks and eyes 100mm size aluminium plate type II complete all as specified and directed.

S&F Hasp & staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate with screws 150mm size complete all as specified and as directed.

S & F aluminium alloy, anodised sliding door bolts 300mm long with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified and as directed.

Dismantling water tanks and removing to store capacity exc 1000 ltr & n exc 2000 ltr complete all as specified and directed.

S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 2000 ltrs including S&F 25 mm ball PTMT Ball valve high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550x400mm including cutting for and pinnning in ends of brackets or erecting stand but excluding taps, wastes chain and plug and porcelain stopper but including brackets brackets and 32mm waste coupling and waste pipe fixed in repairs complete all as specified and directed.

M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 25 mm dia bore pipes complete all as specified and as directed.

S & F in repairs Vitreous china wash down water closet (pedestal pattern ) white (ETWC) and fixed including Plastic seat cover, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete all as specified

S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufacturer's instruction and as directed by the Engineer in charge

S & F in repairs 15mm Bib taps cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F 15mm dia concealed Brass Angle stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and directed.

S&F in repairs 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F 15mm dia pillar taps, cast copper alloy with capstan heads, chromium plated fancy type, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and as directed.

S&F in repairs for two way bib tap 15 mm bore chromium plated with crutch or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repairs 15mm PVC connection with two brass nuts 450mm long of superior quality complete all as specified and as directed.

S&F in repairs 125mm Chromium plated brass shower roses with or without swivel joints, including fixing to steel pipe or union complete all as specified and as directed.

Supply and fix in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F sink with draining board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe in repairs complete all as specified and as directed.

S&F in repair 20mm dia Tubular towel rail 600mm long between flanges 'D' type brass chromium plated, fixed to wall with brass screws and wooden/plastic cleats complete all as specified and directed.

S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gm) including taking down old one complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing unserviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles in vertical surface 300x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10mm thick in CM 1:4 for receiving wall tiles on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm dia complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 25mm dia complete all as specified and as directed.

Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line completely all as specified for following pipes :-(a) 20mm outer dia bore

(b) 25mm outer dia bore

(c) 32mm outer dia bore

Refixing 25mm dia old steel tubing and connections in new or old position complete all as specified and as directed.

M & L for Cutting holes into or through brick walls built in cement mortar and making good in PCC (1:2:4) type B-1 as required Superficial area not exc 150 Sq CM complete all as specified and as directed.

S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints fixed to walls etc complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) pipes 150mm single socketed, in any length with rubber ring joints laid in trenches or in floor complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints laid in trenches or in floor complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints laid in trenches or in floor complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) bends 110 mm bore any radius with oval access door complete all as specified and directed.

S & F PVC (SWR) bends 75 mm bore any radius with oval access door complete all as specified and directed.

S & F PVC (SWR) Junction (Single T) 75 mm bore with oval access door complete all as specified and directed.

S & F (SWR) branch Single (single Y) equal or unequal for 110 mm bore pipe with oval access door complete all as specified and as directed.

S & F (SWR) vent cowl suitable for 110 mm bore pipe complete all as specified and as directed.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and as directed.

M&L for Precast cover slab 1:2:4, type B1 (using 20mm graded aggregate) in landings, cover slabs (for manholes etc.,) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4, for manholes etc complete all as specified and as directed. Note: Reinforcement will be measured and paid seperately.

M/L 10mm dia and over TMT bars as in reinforecment cut to length bent to shape required including cranking hooking ends and binding with mild steel wire( annealed) not less than 0.9 mm dia (or) securing with clips all as specified and as directed

S & F Stainless steel plate rack of size 24X36X10 inch fixed on wall with stainless screw with wooden plugs near the kitchen sink including all accessories and making good the disturbed wall tiles/concrete surface all as specified and directed.

M&L for point wiring of size 1.5 sqmm with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through new non metallic rigid PVC conduit including accessories, concealed in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switchs,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly including taking down carefully copper/aluminium point wiring light, fan, socket or power complete with fittings such as switches, ceiling roses, regulators sockets etc and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed for :- (a) one light point controlled by one switch

(b) one fan point controlled by one switch

(c )one 3 pin socket outlet 5 amps on the same board controlled by one switch.

(d) one 3 pin socket outlet 5 amps on independent board controlled by one switch.

(e) one bell/buzzer point controlled by one bell push

As per above item No. 107 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed.

M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through non metallic rigid Existing PVC conduit, in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switchs,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly including taking down carefully copper/aluminium point wiring light, fan, socket or power complete with fittings such as switches, ceiling roses, regulators sockets etc and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed for :- (a) one light point controlled by one switch

(b) one fan point controlled by one switch

( c) one 3 pin socket outlet 5 amps on the same board controlled by one switch.

(d) one 3 pin socket outlet 5 amps on independent board controlled by one switch.

As per above item No.108 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed.

S& F for modular cover plate with frame 3 module complete all as specified and directed.

S& F for modular cover plate with frame 4 module complete all as specified and directed.

S& F for modular cover plate with frame 6 module complete all as specified and directed.

S&F modular switches suitable for type AC 240V, 6 amps 1 module complete all as specified and directed.

S&F modular sockets suitable for type AC 240V, 6 amps 2 module complete all as specified and directed.

S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and directed.

S&F modular power sockets suitable for type AC 240V, 16 amps 2 module complete all as specified and directed.

S&F modular fan regulator suitable for type AC 240V, 2 module complete all as specified and directed.

S&F modular bell switch suitable for type AC 240V, 16 amps 1 module complete all as specified and directed by Engr-in-Charge

S&F call bell of multi music type A/C 230 volts complete all as specified and directed.

S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and directed.

S& F ceiling fan 230v,1200 mm sweep, five star rating with brushless conductor motor complete with blades, down rods, electronic regulator and accessories complete including taking down ceiling fan and removing blades and fan body and depositing in store including connecting rod, cotter pins and all accessories completeall as specified and as directed.

Supply and fix exhaust fan, steel body AC Single phase230V of size 300mm sweep with blades and frames louvers complete and old fan deposit to E/M store complete all as specified and directed.

S&F lamp holder insulated body with back plate for batten fittings/angle holder complete all as specified and as directed

S&F of LED bulb 9 w high suitable for lamp holder including taking down carefully unserviceable fittings and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make : Havells Cat No. LED PLUS 9W B22 CDL 2STAR LAMP or techno commercial equivalent in Philips /Bajaj

S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete including taking down all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj.

S & F 10 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete including taking down all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSBS10WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj.

S & F 10 Watts COOL LIGHT environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaries comprising of high brightness LEDs, incl taking down unserviceable fittings of any size and capacity complete and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make Havells Cat No. HEXAFT10WLED857SSYMBOPC or techno commercial equivalent in Philips /Bajaj.

S&F sub main wiring complete with two runs of 6 sqmm PVC insulated sheathed single core multistrand copper conductor cable FRLSH of 1100 volts grade drawn through new non metallic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor including taking down all as specified and directed by Engr-in-Charge. Note:- two runs of PVC insulated cable 6 sqmm + one run 6 sqmm of earth wire and one run of conduit including accessories shall be measured as one length. (From TPN DBs to SPN DB)

S&F sub main wiring complete with four runs of 10 sqmm PVC insulated sheathed single core multistrand copper conductor cable FRLSH of 1100 volts grade drawn through new non metallic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with one run of 10 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor including taking down all as specified and directed by Engr-in-Charge. Note:- Four runs of PVC insulated cable 10 sqmm + one run of 10 sqmm of earth wire and one run of conduit including accessories shall be measured as one length. (From TPN DB to SPN DB)

S&F MCB distribution board made of CRCA sheet, powder coated paint conforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volts 6 way MCB DB, TPN with 200 Amp rated bus bar shall conform to IP 38 protection including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240 volts 8 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCCB adjustable thermal & magnetic setting 415V, 4 pole, 50Hz of cap 160 Amps 36 KA including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of rating 415 Volts, TPN 100 Amps complete all as specified and directed by Engr-in Charge including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of rating 240 Volts, SPN 40 Amps including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of Single pole of rating 40 Amps 240 Volts including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4 mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including earth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete including taking down all as specified inlcuding testing on completion.

G.L.THIRUMALAI NAIDU AND COMPANY (BID ID -3345443)

Sri Aruna Associates (BID ID -3346418)

kvs constructions (BID ID -3346941)

SRI VISHAKHA ENTERPRISES (BID ID -3346912)

DJ Group (BID ID -3355130)