SR TO WIRING AT CERTAIN BUILDINGS AT AF STN KANHERI HILLS (PHASE-I) UNDER GE AF THANE

Amount

Taking down/out copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down/out unserviceable Wires from the existing Sub-main Wiring of any type and any description, complete all as specified and as directed.

Taking down the existing unserviceable Main Switch/ Cut out/ DBs of any type/ capacity and any description as existing at Site including Making Good the Disturbed Surfaces of Walls, Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed.

Taking down/out ceiling fan,exhaust fan and wall fan and refixing the serviceable fans after cleaning at existing/new location or deposited to MES store Yard,including connection commissioning complete all as directed as specified by Engineer-in-Charge.

Material and labour for point wiring complete with 1.5 Sqmm (nominal cross section area) FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 volts drawn through and including concealed PVC rigid conduit medium grade, pipe hooks, elbows, junction covers and junction boxes terminated in existing modular steel terminal boxes made out of 1.6mm thick MS sheet concealed in walls including cutting chases in walls for conduits and making good disturbed surfaces of wall in CM 1:3 for mounting switches, sockets, fan regulator, covered with including 3mm thick bakelite plastic laminated sheet top cover fixed flush with wall using brass screws & cup washers including 1.5 Sqmm PVC insulated solid copper conductor wire as earth continuity to common earth and connecting to earth dully for following points controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No.5.00 here-in-before but for One light point controlled by Two 2- way switches.

All as per Srl item No.5.00 here-in-before but for One bell or buzzer point controlled by one push button on independent board with independent switches.

All as per Srl item No.5.00 here-in-before but for one five pins 5 Amps switch socket outlet point on same board complete all as specified and directed.

All as per Srl item No.5.00 here-in-before but for one 3 pin socket outlet 6 AMP on independent board, complete all as specified and as directed.

All as per Srl item No.5.00 here-in-before but for One light point or one fan point controlled by one switch in steel conduit, complete all as specified and as directed.

All as per Srl item No.5.00 here-in-before but for one 3 pin socket outlet 6 AMP on independent board in steel conduit, complete all as specified and as directed.

Material and labour for point wiring with 2.5 Sqmm (nominal area) PVC insulated unsheathed stranded copper conductor FRLSH cable 1100 volt grade (ISI marked) drawing into and including non-metallic rigid PVC concealed conduit (medium quality ISI marked) with all fittings such as tee/bends etcterminated in new MS box and fixing new bakelite sheet as top cover and including 1.5 Sqmm single core PVC insulated copper conductor solid earth wire to common earth and connected to earth dully for one power point independent complete all as specified and directed Engineer-in-Charge.

All as Srl item No.12.00 here-in-before but in steel conduit, complete all as specified and as directed.

M&L in replacement of Sub-main Wiring with 2-Runs of 4 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 4 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty along with the Wiring drawn in conduit, complete all as specified and as directed. Note : (i) Three length of wire along with conduit will be measured as one Length.

M&L in replacement of Sub-main Wiring with 2-Runs of 6 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 6 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty along with the Wiring drawn in conduit, complete all as specified and as directed. Note : (i) Three length of wire along with conduit will be measured as one Length.

All as per Srl item No.15.00 here-in-before but in steel conduit, complete all as specified and as directed.

M&L for TV socket alongwith non-metallic rigid PVC heavy duty conduit minium 20mm external dia concealed in wall from suitable entry point upto socket complete all as specified and as directed.

M&L for Telephone Socket alongwith non-metallic rigid PVC heavy duty conduit minium 20mm external dia concealed in wall from suitable entry point upto socket complete all as specified and as directed.

S&F in replacement of Switch Piano 5/6 Amp, Flush type, Single Pole, 1-way, complete all as specified and as directed.

S&F in replacement of Switch Piano 5/6 Amp, Flush type, Single Pole, 2-way, complete all as specified and as directed.

Supply and Fix in replacement of switch socket combination 2 in 1,6 pin, 5/15Amps flush type 240 V ,complete all as specified and as directed by Engr-in-charge.

S&F in replacement of Socket Outlet 6 Amp, Piano, Flush type, 2-in-1, multi-purpose, 5 Pin, complete all as specified and as directed.

Supply and Fix in replacement of switch socket combination 2 in 1,5 pin, 5 Amps flush type 240 V ,complete all as specified and as directed by Engr-in-charge.

S&F in replacement of Ceiling Rose, 3 Terminals, PVC Polycarbonate, Isolated body complete all as specified and as directed.

Supply and Fix in replacement of fan regulator Electronic type step type for 400 watts ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix and fix bell Ding Dong AC 230 volt single pole ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix Bell push button flush type 5 Amps ,complete all as specified and as directed by Engr-in-charge.

S&F Modular switch piano 6 Amps single pole, one way, 01 Module complete all as specified and directed.

S&F Modular switch piano 16 Amps single pole, one way, 01 Module complete all as specified and directed.

S&F Modular socket 2 / 3 pin, 6 Amps, 230 volts, combined 2 Module complete all as specified and directed .

S&F Modular socket 6 pin, 6 / 16 Amps, 230 volts, combined 2 Module complete all as specified and directed .

S&F Modular bell push, flush type, 5 Amp, 230 Volts grade complete all as specified and directed.

S&F Modular electronic fan regulator suitable for ceiling fan 2 Module, 1200mm / 1400mm sweep, socket size, rotary type complete all as specified and directed .

S &F Decorative Wall Light Fixture made up of Polycarbonate with LED Lamp 9 Watt (B-22 Base) Light fixed on the Wall/ Ceiling and connecting up with and including Copper Conductor Cable of size 23/0.0076 Sqmm 3 Core PVC Copper Flexible Conductor and necessary Earthing Connection from to Light Fitting ,complete all as specified and as directed by Engr-in-charge.

S&F in replacement of LED bulding security light fitting of 25/30 Watt including LED lamps complete with body robust,corrosion resistant,superior finish and without any cracks or through holes, made in a single piece by high pressure die cast aluminium alloy.The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -66 protection as per IS - 10322-1982(Part -I) with latest amendments and input voltage range 140 - 270 V, AC, frequency 50 - 60 Hz ,P.F should be more than 0.9 with Total Harmonic Distoration THD (I) less than 10%, cool white colour and lamp starting time should not be more than 10 second. Fitting should be provided with 10 KV surge protection Driver should be constant current constant voltage driver .Driver should have high voltage withstanding capacity upto 300 V, AC. Driver should also have double phase protection, no load , open circuit and short circuit protection. LED light fitting should be suitable for ambient temperature from -10 degreeCentrigrade to 50 degree Centrigrade and humidity level 10% to 90 % RH. Covers should be polycarbonate/toughened glass to ensure minimum IP 66 degree protection. Cover should not degrade due to heating and ageing. The efficiency of LED luminaries system shall be more than 85 lumens per watt and must be certified by the LM-79 test report. ,complete all as specified and as directed by Engr-in-charge.

S&F Integral Decorative LED 8 Watt Bollard Energy Saving, Environmental Friendly aesthetically designed with opal acrlylic with IP-65 Protection, providing electric connection with suitable PVC copper flexible conductor, providing PCC 1:3:6 (20mm graded aggregate) work of size 300x300x450mm including necessary formwork and earth work, complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size ,complete all as specified and as directed by Engr-in-charge.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size ,complete all as specified and as directed by Engr-in-charge.

Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size ,complete all as specified and as directed by Engr-in-charge.

Supply and fixing in replacement of LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size ,complete all as specified and as directed by Engr-in-charge.

Supply and Fix in replacement of LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor ,complete all as specified and as directed by Engr-in-charge.

S&F in replacement flush mounting factory made SPN DB 8 way, 240 Volt, Double door, IP-43 protection, IK-09 with metal door with 100 Amps copper bus bar, with neutral bar, earth bar and cables ties for cable management fully insulated bus bar complete all as specified and directed by Engineer-in-charge.

S&F in replacement MCB 6 to 32 Amps, Single Pole 240 Volts, 10 KA, ‘C’ Curve, complete all as specified and directed by Engineer-in-charge.

S&F in replacement MCB, Single Pole & neutral, 40 Amps 'C' Curve having breaking capacity 10 KA complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of sheet metal plug & socket DB, SP, with a two pin and earth plug with socket, 230 Volts with & including one MCB SP ‘C’ Curve 10 kA, 20 Amps complete all as specified and directed by Engineer-in-charge.

S&F in replacement of Load Line 4-way Enclosure Double Door with Incomer MCCB 63 Amp rating, 16 KA, 4 Pole and suitable for 415 Volt 50 Hz AC Supply including taking down old unserviceable one, complete all as per specified and as directed.

S&F in replacement of Load Line 4-way Enclosure Double Door with Incomer MCCB 100 Amp rating, 16 KA, 4 Pole and suitable for 415 Volt 50 Hz AC Supply including taking down old unserviceable one, complete all as per specified and as directed.

S&F Flame Proof Distribution Box SPN, 8-way with Bus-bar Weather Proof in Cast Aluminium LM-6 Enclosure, opened by externally Spring type knobs, complete with M-25 Cable Entry to suit Incoming Cable and 4 No. M-20 Cable Entries for Out-going Cables from bottom, suitable for fixing on Wall/ Column/ Sheet Structure, etc. duly Epoxy Powder Coated with Flame Proof Flexible Metallic Conduit upto 1.0 Metre in length including MCB SPN 40 Amp (1 No.) and MCB SP upto 25 Amp (6 No.) as Out-going duly Tested and Certifed by CIMFR DHANBAD & CCOE NAGPUR, BS with ISI marked and connecting up including taking down/ out unserviceable Distribution Box, complete all as specified and as directed.

Supply and fixing LED light fitting 1x8 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size ,complete all as specified and as directed by Engr-in-charge.

S& F in replacement of flame proof exhaust fan of size 300 mm sweep ,complete all as specified and as directed by Engr-in-charge.

S& F in replacement of flame proof ceiling fan of size 1200 mm sweep ,complete all as specified and as directed by Engr-in-charge.

Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V ,complete all as specified and as directed by Engr-in-charge.

S&F in replacement of Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth ,complete all as specified and as directed by Engr-in-charge.

S & F in replacement of the fresh air fan , single phase, 230 volts size 200mm sweep with louver shutter ,complete all as specfied and directed by Engineer-in-Charge.

S& F wall mounting fan AC 230 Volts 50 Hz single phase 450 mm sweep, energy efficient, five star rating, with built on ON/OFF & speed regulator inside mounting base oscillating type with aluminium alloy one piece blade double ball bearing heavy duty motor sturdy close mesh guard stainless steel stem having vertiical angle adjustmenty from 22 degree to 45 degree including grouting of MS rugged studs/bolts inwall/column for mounting the fan , complete all as specified and directed by Engr-in-Charge.

Supply & Laying,Fixing XLPE insulated, armoured heavy duty Electric Cable with Aluminium Conductor Multi Stranded, 1100 Volt grade, Cross sectional area 6 Sqmm 4 Core including necessary Aluminium Thimbles, jointing and Testing, ,complete all as specified and as directed by Engr-in-charge.

Supply & Laying,Fixing XLPE insulated, armoured heavy duty Electric Cable with Aluminium Conductor Multi Stranded, 1100 Volt grade, Cross sectional area 35 Sqmm 3.5 Core including necessary Aluminium Thimbles, jointing and Testing, ,complete all as specified and as directed by Engr-in-charge.

Excavation in Trenches, not exc. 1.50 Metre wide and exc. 1.50 Metre for Foundation of Pole/Stays, cables etc. and getting out in Soft/ Loose Soil, ,complete all as specified and as directed by Engr-in-charge.

M&L for Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, punned thickness of Sand Cushioning only will be Measured.

Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Surplus Soil providing Heaps along the Route of the Cable Line in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated materials not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the starting point, complete all as specified and as directed.

Supply and lay in trenches PCC cable cover class LV, type 1, flat of size 250 mmx150 mmx 40 mm for cable protection all as specified and directed.

M&L Galvanised Steel Tubing Pipe 40mm bore (dia), light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable size Mild Steel Flat Iron Clamps, Bolts, Nuts, Washers, etc., ,complete all as specified and as directed by Engr-in-charge.

S&F in replacement of ceiling fans complete with blades, anti suicide type down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ,complete all as specified and as directed by Engr-in-charge.

M&L Earthing with Galvanised Steel Earth Plate Electrode 600x600x6.3mm buried directly in ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including taking down/out unserviceable Earthing, complete all as specified and as directed.

Vinod Enterprises

Shree Gajanan Enterprises

Nissan Electricals