Repairing and painting work on the parapet of the bridge located on the Middle Ganga Canal at Km 1 of the Chhapkauli Shiv Mandir Road in district Hapur

Dismantling of existing structures like culverts,bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work including T&P and scaffolding wherever necessary,sorting the dismantled material,disposal of unsericeable material and stacking the servieable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and laying Cement Concrete wearing coat M-30 Grade including reinforcement complete as per drawing and Technical Specification including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom as per MORTH specification including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 75 tonnes/ hours using crushed stone chipping 6.7 mm size (Type-B) and penetration bitumen of suitable grade including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Plain/Reinforced Cement Concrete M-25 in Open Foundation complete as per Drawing and Technical Specifications including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications of MORTH including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface etc. complete including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST..

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface etc. complete including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawing and standard specification to be installed by the manufacture/supplier or their authorised representative ensuring Morth Specification 2600.SI no 14.23 including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes rates are including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST. As per SOR SI.No- 19.01

Providing and laying of repeatitive bars of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per MORTH specification including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Supply and fixing of raised pavement marker (Cat Eye/Road stud) with Made of Plastic body of RPM/Road Stud shall be moolded from ASA (Acrylic Styrne Acrylonitrite) or HIPS (High Impact Polystyrene) or Acrylonitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The marker shall support a load of 13.635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face, lenses shall be mouled of meithyl methecrylate confirming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sq.cm the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture epoxy installations, excess adhesive around the edge of the marker excess adhesive on the pavement and adhesive on the exposed surface of the marker shall be immediately removed. The Contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflecting panel, to the Engineer in addtion a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers, in case the markers are displaced, damaged, get wom out or lose their reflectivity compared to stipulated standard the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Supply & Fixing of MS Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. The surface should be conceated so that there should not be any exposed surface without powder coating. Alternatively, these metal guide poles can be concealed with thermoplastic body. The posts shall have Ian ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground. Mild steeI Guide Poles shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956 which would ensure to obtainI clear visibility of the road alignment during night time. The Retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory / Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Please Enable Macros to View BoQ information