CERTAIN REPAIR/ REPLACEMENT OF INTERNAL POINT WIRING, SUBMAIN WIRING, DBs AND EARTHING IN MD ACCN OF ZONE A UNDER UNDER AGE E/M-V OF GE NORTH BATHINDA AT BATHINDA MIL STN

Amount

SCHEDULE 'A' E/M Works

Taking down carefully/aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes any type etc and making good distrubed surfaces of wall and floors etc to match with the existing colour all as specified and directed by Engineer-in-charge.

Material and labour for point wiring complete with 1.5 sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor FRLSH cable (ISI marked) in existing concealed surface conduit for one light point /fan point controlled by one switch including 1.5 sqmm single core multi stranded FRLSH copper earth wire to common earth and connecting to earth dolly, MS Sunken box and 3 mm thick laminated sheet ISI Marked etc complete all as specified and directed. Make : Anchor/Havells/Polycab/Dcab.

All as per item No 2 here in before but for one socket outlet 5 pin 5 Amp on same board complete all as specified & directed.

All as per item No 2 here in before but for one socket outlet 5 pin 5 Amp on independent board but not below the switch board complete all as specified & directed.

All as per item No 2 here in before but for one socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed.

All As per item No 2 in before but for bell/buzzer point complete all as specified and directed.

All As per item No 2 in before but for one light point controlled by Two Two way switch all as specified and directed.

Taking down carefully copper/aluminium point wiring (light/fan/socket or power point) complete fitting such as modular cover sheets/hylem sheet switches,ceiling rose , pendent holder, sockets,regulators including rusted/broken concealed conduit and sunken boxes any size etc and making good disturbed surfaces of wall and floor etc to match with the existing all as specified and directed by Engineer-in-charge.

Material and labour for point wiring complete modular type with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken boxe of suitable for mounting modular switches and socket,fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge. Make : Havells/Polycab/Anchor/Dcab.

All as per item No 9 here in before but for one socket outlet 5 pin 5 Amp on same board complete all as specified and directed.

All as per item No 9 here in before but for one socket outlet 5 pin 5 Amp on independent board but not below the switch board complete all as specified and directed.

All as per item No 9 here in before but for one socket outlet 6 pin, 5/15 Amp multi purpose, 2 in 1 on independent board with 2.5 Sqmm cable & including 2.5 sqmm single core multi stranded FRLSH copper earth wire to common earth complete all as specified and directed.

All As per item No 9 in before but for bell/buzzer point complete all as specified and directed.

All As per item No 9 in before but for one light point controlled by Two Two way switch all as specified and directed.

Taking down old rusted sunken box any type and size including hylum sheet and switches ,sockets,regulators etc and making good distrubed surfaces of wall and floors etc to match with the existing colour all as directed by Engineer-in-charge.

Supply and fixing metal flush sunken box suitable for 1& 2 module including suitable module plate and required matching coloued covers suitable for modular switches, sockets, regulators etc. complete all as specified and directed by Engineer-in-Charge. Note :- Finishing of cement/brick work to the disturbed place of wall including its existing colour paint/distemper matching works included in this item rate. Modular switches, sockets and regulators to be paid separately. Make:- Legrand/ L&T /Schneider

Supply and fixing metal flush sunken box suitable for 3 module including suitable module plate and required matching coloued covers suitable for modular switches, sockets, regulators etc. complete all as specified and directed by Engineer-in-Charge. Note :- Finishing of cement/brick work to the disturbed place of wall including its existing colour paint/distumber matching works included in this item rate. Modular switches, sockets and regulators to be paid separately. Make:- Legrand/ L&T /Schneider

Supply and fixing metal flush sunken box suitable for 4 module including suitable module plate and required matching coloued covers suitable for modular switches, sockets, regulators etc. all as directed by Engineer-in-charge. Note :- Finishing of cement/brick work to the disturbed place of wall including its existing colour paint/distumber matching works included in this item rate. Modular switches, sockets and regulators to be paid separately. Make:- Make:- Legrand/ L&T /Schneider

Supply and fixing metal flush sunken box suitable for 6 module including suitable module plate and required matching coloued covers suitable for modular switches, sockets, regulators etc. all as directed by Engineer-in-charge. Note :- Finishing of cement/brick work to the disturbed place of wall including its existing colour paint/distumber matching works included in this item rate. Modular switches, sockets and regulators to be paid separately. Make:- Legrand/ L&T /Schneider

Supply and fixing metal flush sunken box suitable for 8 module including suitable module plate and required matching coloued covers suitable for modular switches, sockets, regulators etc. all as directed by Engineer-in-charge. Note :- Finishing of cement/brick work to the disturbed place of wall including its existing colour paint/distumber matching works included in this item rate. Modular switches, sockets and regulators to be paid separately. Make:- Legrand/ L&T /Schneider

Supply and fixing metal flush sunken box suitable for 12 module including suitable module plate and required matching coloued covers suitable for modular switches, sockets, regulators etc. all as directed by Engineer-in-charge. Note :- Finishing of cement/brick work to the disturbed place of wall including its existing colour paint/distumber matching works included in this item rate. Modular switches, sockets and regulators to be paid separately. Make:- Legrand/ L&T /Schneider

Supply and fixing metal flush sunken box suitable for 16 module including suitable module plate and required matching coloued covers suitable for modular switches, sockets, regulators etc. complete all as specified and directed by Engineer-in-Charge. Note :- Finishing of cement/brick work to the disturbed place of wall including its existing colour paint/distumber matching works included in this item rate. Modular switches, sockets and regulators to be paid separately. Make:- Legrand/ L&T /Schneider

Supply and fixing metal flush sunken box suitable for 18 module including suitable module plate and required matching coloued covers suitable for modular switches , sockets, regulators etc. complete all as specified and directed by Engineer-in-Charge. Note :- Finishing of cement/brick work to the disturbed place of wall including its existing colour paint/distumber matching works included in this item rate. Modular switches, sockets and regulators to be paid separately. Make:- Legrand/ L&T /Schneider

Supply and fixing plastic surface boxes suitable for 4 module including suitable module plate and required matching coloued covers suitable for modular switches, sockets, regulators etc. all as directed by Engineer-in-charge. Note :- Finishing of cement/brick work to the disturbed place of wall including its existing colour paint/distumber matching works included in this item rate. Modular switches, sockets and regulators to be paid separately. Make:- Legrand/ L&T /Schneider

Supply and fixing plastic surface boxes suitable for 6 module including suitable module plate and required matching coloued covers suitable for modular switches, sockets, regulators etc. complete all as specified and directed by Engineer-in-Charge. Note :- Finishing of cement/brick work to the disturbed place of wall including its existing colour paint/distumber matching works included in this item rate. Modular switches, sockets and regulators to be paid separately. Make:- Legrand/ L&T /Schneider

Supply and fixing Modular switch 1 way 6A, 1module mechanism white with "light marking, including suitable internal modular plate, complete all as specified and directed by Engineer-in-Charge. Make Legrand Cat Part No 677203 or equivalent to L&T /Schneider

Supply and fixing Modular switch 1 way 6A, 1module mechanism white with " fan marking, including suitable internal modular plate complete all as specified and directed by Engineer-in-Charge. Make Legrand Cat Part No 677204 or equivalent to L&T /Schneider

Supply and fixing modular switch 16 Amps 1w with indicator 1module mechanism white, suitable internal modular plate complete all as specified and directed by Engineer-in-Charge. Make Legrand Cat Part No 677211 or equivalent to L&T /Schneider

Supply and fixing modular socket outlet, 6A - 2/3 pin combined 2 module mechanism white, suitable internal modular plate complete all as specified and directed by Engr-in- Charge. Make Legrand Cat Part No 677228 or equivalent to L&T /Schneider

Supply and fixing modular Euro socket outlet, 16A - 2/3 pin combined 2 module mechanism white, suitable internal modular plate complete all as specified and directed by Engr-in- Charge. Make Legrand Cat Part No 677231 or equivalent to L&T /Schneider

Supply and fixing Modular Bell push with indicator 6A 2 module mechanism white, suitable internal modular plate and switch cover and it connected acessories, complete all as specified and directed by Engineer-in-Charge. Make Legrand Cat Part No 677223 or equivalent to L&T /Schneider

Supply and fixing Modular two way switch 6A 1 module mechanism white, suitable internal modular plate and switch cover and it connected acessories, complete all as specified and directed by Engineer-in-Charge. Make Legrand Cat Part No 677201 or equivalent to L&T /Schneider

Supply and fixing Modular fan regulator 100w 360ndegree 2 module mechanism white, suitable internal modular plate complete all as specified and directed by Engr-in- charge . Make Legrand Cat Part No 677240 or equivalent to L&T /Schneider

Supply and fixing "mylinc mechanism modular switch 1 way 6A, 1module including suitable internal modular plate complete all as specified and directed by Engineer-in-Charge. Make Legrand Cat Part No 675501 or equivalent to L&T /Schneider

Supply and fixing "mylinc mechanism modular switch 16A ,1 way, SP with indicator, 1module including suitable internal modular plate complete all as specified and directed by Engineer-in-Charge. Make Legrand Cat Part No 675513 or equivalent to L&T /Schneider

Supply and fixing "mylinc mechanism modular socket 1 way 6A-2/3 pin combine, 2 module including suitable internal modular plate complete all as specified and directed by Engr-in- Charge. Make Legrand Cat Part No 675550 or equivalent to L&T /Schneider

Supply and fixing "mylinc mechanism modular socket 1 way 6/16A-2/3 pin combine , 1 module including suitable internal modular plate complete all as specified and directed by Engr-in- Charge. Make Legrand Cat Part No 675553 or equivalent to L&T /Schneider

Supply and fixing "mylinc mechanism modular bell push 1 way 6A, 1module including suitable internal modular plate complete all as specified and directed by Engineer-in-Charge. Make Legrand Cat Part No 675504 or equivalent to L&T /Schneider

Supply and fixing "mylinc mechanism modular two way switch 6A 1 module , suitable internal modular plate and switch cover and it connected acessories, complete all as specified and directed by Engineer-in-Charge. Make Legrand Cat Part No 675502 or equivalent to L&T /Schneider

Supply and fixing "mylinc mechanism modular fan regulator 100w 360degree 2 module , suitable internal modular plate complete all as specified and directed by Engr-in- charge . Make Legrand Cat Part No 675535 or equivalent to L&T /Schneider

Supply and fixing ceiling rose 3 plate flush type 6 Amp 250V AC topline series with polycarbonate 20 X 50 mm two to three terminal complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Batten holder 2 Amp 250V AC with skrit ISI marked top line series , polycarbonate cased body of brass with back plate suitable for batten fittings including led 9 watt LED bulb complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Electric / Electronic Bell, ding dong type 230 Volt single pole AC supply complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Electric / Bell Multi Music type 230 Volt single pole AC supply complete all as specified and directed by Engineer-in-Charge.

Supply and fixing wall mounted Retro LED 20 watt, Batten decorative type, appx 4 feet long, pre wired including LED tube light 20W, 6000K with inbuilt driver complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Supply and fixing wall mounted Batten fitting square profile 20 watt white flux appx 4 feet long, pre wired complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Supply and fixing wall mounted Batten fitting square profile 20 watt warm white flux appx 4 feet long, pre wired complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Supply and fixing LED Mirror light fitting of 9/10 watt, 6000 K , lineer & compact with decorative grey end caps,polycarbonate body and ribbed opal diffuser complete with lamp and all other accessories fitting arrangement including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector, complete all as specified and directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Supply and fixing wall mounted/surface mounted decorative wall light fixture in cylindrical/Doom profile made up of polycarbonate for and including LED 7/9 Watt lamp, base B22, complete fitting with LED lamp and all other fixing accessories including electric connection connecting with using flexible copper wire twin core including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Supply and fixing round shape 15watt 220 volts AC /surfaced type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Supply and fixing square shape 15 watt 220 volts AC recessed type coolwhite with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Supply and fixing square shape 15 watt 220 volts AC recessed type warmwhite with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Supply and fixing bed side lamp bidirectional type pre-wired with Led of suitable capacity 7/9watt complete all as specified and directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Supply and fixing New generation energy saving & environmental friendly long life versatile pressure die -cast aluminium IP 66 roadway luminaire with high power LED of 25/35 watt with toughened glass complete with suitable GI for security light fitting fixing to wall/column & electrical connection to the light fitting providing 1.5 mtr long twin core round copper conductor cable of suitable size and testing complete all as specified and directed. suitable internal modular plate and switch cover and it connected acessories, complete all as specified and directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Supply and fixing LED lamp 9 watt B-22 series suitable for angle hoder complete all as specified and directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Supply and fixing LED lamp 9 watt E-27 series warm white suitable for threaded hoder, complete all as specified and directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Material and labour for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 sqmm in existing PVC concealed conduit including taking down old unserviceable submain wiring complete all as specified and directed by Engineer-in-Charge. Make : Anchor/Polycab/Havells/Dcab

Material and labour for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, multi -stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 sqmm in existing PVC concealed conduit including taking down old unserviceable submain wiring complete all as specified and directed by Engineer-in-Charge. Make : Anchor/havells/Polycab/Dcab.

Material and labour for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 sqmm in & including PVC conduit size 20mm including taking down old unserviceable submain wiring complete all as specified and directed by Engineer-in-Charge. Make : Anchor/Havells/Polycab/Dcab.

Material and labour for submain wiring complete with two single core 10 sqmm 1100 volts grade, PVC insulated multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 Sqmm in & including PVC conduit size 20 mm including taking down old unserviceable submain wiring complete all as specified and directed by Engineer-in-Charge. Make : Anchor/Havells/Polycab/Dcab.

Material and labour for casing caping of size 32mm (medium grade), fixing on wall/ceiling surface including all fitting arrangement i.e. PVC clamp, rawl plug, screw etc. including making good disturbed surfaces of walls as per existing after that existing LAN wires and telephone wires any size disconnecting the existing connection and drawing through casing caping and re-connection with existing instruments as per original complete all as specified and as directed by Engineer-in-charge.

Supply and fixing sheet metal enclousers made out of CRCA mild steel sheet , IP-43 protection, flush mounted with metal door, powder coated DB SPN 12 way 230 V AC with 200 Amp rated bus bar, Double Door,12 modules, dust and vermin proof suitable for incorporation of MCB's and isolators etc including taking down old unserviceable MCB DB's complete all as specified and directed by Engineer-in-Charge. Make :- Legrand/Schneider/L&T

Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Make :- Legrand/Schneider/L&T

Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) TPN, 4 Way 433 V (8+12 modules), double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Make :- Legrand/Schneider/L&T

Supply and fixing Sheet metal enclousers made out of CRCA mild steel sheet, double door, powder coated DB VTPN 6 way 415 Volt, dust and vermin proof suitable for incorporation of MCCB's upto 125Amp and isolators etc complete including taking down old unserviceable DB complete all as specified and directed by Engineer-in-Charge. Make :- Legrand/Schneider/L&T

Supply and fixing (Concealed with wall) single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts, AC supply including taking down old unserviceable enclosure complete all as specified and directed by Engineer-in-Charge. Make :- Legrand/Schneider/L&T

Supply and fixing MCB SP suitable for 230 volts AC supply 6 to 40 Amps, SP rupturing capacity not less than 10KA, C Curve ISI Marked, 1 Module including taking down old unserviceable MCB SP complete all as specified and directed by Engineer-in-Charge. Make :- Legrand/Schneider/L&T

Supply and fixing MCB SPN 63 Amps, 10 KA 'C' curve 230 V AC, 50 Hz including necessary attachment including taking down old unserviceable MCB SPN complete all as specified and directed by Engineer-in-Charge. Make :- Legrand/Schneider/L&T

Supply and fixing MCB SPN 32 Amps, 10 KA 'C' curve 230 V AC, 50 Hz including necessary attachment including taking down old unserviceable MCB SPN complete all as specified and directed by Engineer-in-Charge. Make :- Legrand/Schneider/L&T

Supply and fixing MCB TPN 40 to 100 Amps 415 Volt AC, C curve, 4 module capacity not less than 10 KA including taking down old unserviceable MCB TPN complete all as specified and directed by Engineer-in-Charge. Make :- Legrand/Schneider/L&T

Supply and fixing MCCB 4 pole 125 Amps 415 Volt, 16 KA complete including taking down old unserviceable MCB TPN complete all as specified and directed by Engineer-in-Charge. Make :- Legrand/Schneider/L&T

Material and labour for Retro LED 20 watt tube only appx 4 ' long warm white 6000k min 100 lumens per watt with inbuilt driver to be fixed in to existing batten in replacement of tube 34/40 watt incl taking down of existing tube rod complete all as specified and directed by Engineer-in-Charge. Make:- Anchor/Philips/wipro/crompton/Havells.

Removing of existing Serviceable/Unserviceable MCCBs, MCBs, Bus bars and and connectedwiring acessories from existing panel board for cleaning and spray painting the same wall mounted indoor LT panel board including repair of hinges of ouble door complete prewired, with locking arrangements and hanging bracket suitable for fixing on wall including necessary internal wiring for MCBs and electric meter and suitable opening for cable entry with gland comprising all as specified and directed by Engr-in- charge. Note :- After the spray painting and cleaning and refixing of bus bars re-connecting energy meters its original position and necessary replacement of bus bars and its connected items included in the quoted rate and - MCCBs, MCBs are paid separately

Supply only MCCB four pole 100 A 415V (fixing arrangements rate included in item No 73 above).

Supply only MCB SPN 63 A 415V (fixing arrangements rate included in item No 73 above).

Supply only MCB SPN 10 A 215 V (fixing arrangements rate included in item No 73 above).

L H ENTERPRISES

M/s NIRMAN BUILDERS

M/s GURFATEH BUILDERS