Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.5 LAccepted-AOC THEKKEKOTTARAM RAMANTHALI PO KANNUR DIST KERALA 670 308 | RAMANTHALI | KANNUR | KERALA | 670308 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹49.1 L+₹42,111 (0.86%)Rejected-Finance DOOR NO XII 356 A OPP POST OFFICE RAMANTHALI POST DIST KANNUR KERALA 670 308 | RAMANTHALI | KANNUR | KERALA | 670308 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹50.1 L+₹1.4 L (2.90%)Rejected-Finance DOOR NO IV 400 NEAR RAMANTHALI GHSS RAMANTHALI PO KANNUR 670308 | KANNUR | KERALA | 670308 | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹50.8 L+₹2.1 L (4.30%)Rejected-Finance 137 D THEJAS BURNASHERRY KANNUR KERALA 670013 | KANNUR | KANNUR | KERALA | 670013 | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹51.4 L+₹2.7 L (5.49%)Rejected-Finance RP IV 23 PUNNAKADAVU JN RAMANTHALI P O KANNUR 670308 | KANNUR | KANNUR | KERALA | 670308 | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
24 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(MAINT)EZHIMALA
GARRISON ENGINEER (MAINT) MILITARY ENGINEER SERVICES INDIAN NAVAL ACADEMY POST KANNUR DIST KERALA 670 310
AS PER BOQ AND TENDER DOCUMENTS
2023_MES_606156_1
GE MAINT EZHIMALA 8590
Open Tender
Civil Works
Item Rate
330 days
EZHIMALA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MAINT EZHIMALA
₹90,000
Yes
11 Aug 2023
27 Jun 2023
26 Jul 2023
27 Jun 2023
24 Jul 2023
11 Jul 2023
28 Jun 2023 - 5 Jul 2023
Amount
Notes:- 1. The contractor should visit the site before quoting the tender to know the working condition of the station. 2. All requisite safety measures are to be adopted by contractor on site.
Taking down shutters of any description n.exc 1 sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed.
Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from the frame) complete all as specified and as directed.
S & F 150mm anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.
S & F 100mm butt hinges cast brass, with mild steel hinge pin, bright polished and fixed type B-11 complete all as specified and as directed.
S & F in repairs 150 mm anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.
S & F in repairs 100 mm mild steel butt hinges, cold rolled medium weight complete all as specified and as directed.
S & F in repairs 150mm extruded anodised aluminium alloy handles fabricated type complete all as specified and as directed.
S & F in repairs mortice lock brass body, 100 mm, 4 levers vertical type complete all as specified and as directed.
S & F in repairs 75 mm hasp and staple mild steel safety type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S & F in repair floor door stopper 150mm size aluminium alloy body and tongue double legged, anodised with hard drawn steel spring fixed to door complete all as specified and as directed.
S & F in repairs aluminum (die cast) body door closer hydraulically regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.
S & F in repair aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples complete all as specified and as directed.
M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
S & F in repairs 75mm long anodised aluminium handle cum lock for sliding window/ventilator shutter complete all as specified and as directed.
S & F in repairs mild steel friction hinges suitable for window/ ventilator shutters complete all as specified and as directed.
Taking down aluminium shutters exc 1.00 sqm and n exc 2sqm each (without taking out frame) and refixing in the same positon after carrying out repairs and provision of aluminum tie rod at top and bottom rails complete all as specified and as directed.
M&L for aluminium powder coated windows and ventilator shutters etc. side hung type without sash bars,aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.
S&F aluminium powder coated door shutter, side hung type aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.
S&F aluminium powder coated frame for partitions, doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and as directed.
S&F fibre glass reinforced plastic (FRP) door frame of 100mm x 60 mm thick are to be laminated with inner core of treatment and outer core of average 2 mm thick FRP with gel coat finish weighining an average of 4 kgs per mtr complete all as specified and as directed.
S&F 30 mm thick factory made door shutter to be made with unsaturated polyster resin moulded to 3 mm FRP laminate for forming hollow rails and styles suitable treated and seasoned rubber wood are to be filled inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels with gel coat finish and with an average weight of 8 kg per sqm complete all as specified and as directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ any thickness including cover fillets complete all as specified and as directed.
M&L for providing polyester foil coated aluminium alloy (metal planks) for false ceiling in repair as per manufacturers instructions complete all as specified and as directed.
All as per item ser No.25 above but fixing only complete all as specified and as directed.
S&F in repair anodised aluminium snap grid frame work for false ceiling with 605mmx605mm size, consisting of main tee of size 123.50mmx 36.50mmx 1.50mm, cross tee of size 23.50mm× 23.50mmx1.50mm and wall angle of size 1.50 x1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire upto 1200 mm end level fixed to roof slabs by means of ceiling cleats made out of G.I. mm size 60 mm long and expansion hold fasteners 40 mm long in soffit slab/walls with and including 4mm thick non-abestos fibre cement building boards panels 600mmx600mm size including taking down of old false ceiling complete all as specified and as directed.
Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary hangers 6mm dia Gl up to1200mm length adjusting level fixed to roof slab by means of cleats made out of FI 40x3mm size 60 cm long and expansion holdfast 12.5mm dia 40mm long with and including calcium silicate ceiling made out of 1800 × 1200 mm size board of siliceous and calcareous material reinforced with cellulose fire fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including fishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including taking down of old false ceiling complete all as specified and as directed.
S&F in repair 18/19mm thick pre-laminated particle board exterior grade, one side decorative choice lamination and other side balancing white lamination, fixed with screws to wooden / aluminium frame work as in cupboard shutters complete all as specified and as directed.
S&F in repair 9mm thick pre-laminated particle board exterior grade, one side decorative choice lamination and other side balancing white lamination, fixed with screws to wooden / aluminium frame work as in cupboard shutters complete all as specified and as directed.
M & L for 4mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing with beading complete all as specified and as directed.
M & L for 5.5 mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing with beading complete all as specified and as directed.
S & F in repair vitreous china wash basin, coloured (flat back) 550x400mm excluding pillar tap, but including fixing brackets, cutting for and pinning in ends of brackets complete all as specified and as directed.
S&F in repairs pillar taps 15 mm size, cast copper alloy, chromium plated screwed down high pressure screwed for iron pipe & fixed complete all as specified and as directed.
S & F in repair vitreous china, wash down water closet (EWC) with seat cover coloured, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed.
Supply and fix in repairs vitreous china wash down water closet pan (pedestal DEMBABC 6 Each pattern), cascade type including flushing cistern, light coloured, with seat cover closed pattern with flat bottom, cover and mild steel chromium plated or aluminised hinging device etc including connection to drain (or outgoing pipe) and to flushing pipe with and complete all as specified and as directed.
Supply and fixing in repairs vitreous china half stall urinal, light coloured, of size 580mm x 380mm x 350mm complete with chromium plated waste fittings including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement, (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.
S & F in repair vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.
S & F plastic seat cover (colour) closed pattern with flat bottom suitable for EWC including taking down old cover complete all as specified and as directed.
S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets complete all as specified and as directed.
S & F in repairs 15mm bore chromium plated bib taps (fancy type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and as directed.
S&F in repair angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and as directed.
S & F in repair cast copper alloy chromium plated towel ring complete all as specified and as directed.
S & F in repair 20mm dia, D type, 60cm long cast copper alloy, chromium plated towel rail complete all as specified and as directed.
S & F in repair cast copper alloy chromium plated toilet paper holder complete all as specified and as directed.
S&F in repair chromium plated soap tray fixed with stainless steel screws complete all as specified and as directed.
S & F in repair chromium plated health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed.
S & F in repair cast copper alloy, chromium plated waste coupling with long shank, half thread, 32 mm dia, for WHB etc. complete all as specified and as directed.
Taking up or down steel tubing and connections 15mm dia complete all as specified and as directed.
Taking up or down steel tubing and connections 20mm dia complete all as specified and as directed.
S&F 15/16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
S&F 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.
S & F in repairs 32mm dia PVC flexible waste pipe for urinals/WHB/sink etc complete all as specified and as directed.
S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
S & F in repair PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S & F in repair PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S & F in repair 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
Demolition of brick work, PCC block or stone masonry built in cement mortar complete all as specified and as directed.
M & L for precast cement concrete block masonry with solid blocks type B1, 1:3:6 (20mm graded aggregate) exc 10 cm in width and set in cement mortar 1:6 complete all as specified and as directed.
All as per item No 60 above but except PCC blocks complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish of the premises complete all as specified and as directed.
M & L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.06 sqm but n.exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.
M & L for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.
M & L for Glazed ceramic coloured tiles 350x250x7mm / 450x350x 7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.
M&L for vitrified coloured ceramic tiles 10mm thick (square/ rectangular), light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set with or without spacers and jointed in neat cement slurry and pointed in white or coloured cement /epoxy to match the shade including 20mm thick screed bed in CM 1:4 complete all as specified and as directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and poointed in white or coloured cment to match of light shade including 15mm thick backing coat plaster in CM 1:4 complete all as specified and as directed.
Dismantling stone slab and tiles of any description or thickness in floors, landings aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.
M & L for chequered cement concrete tiles 250x250x25mm / 300x 300x25mm thick in floors, with mixture of grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L for marble (Makrana Doogri) of approved shade, 18-20 mm thick, machine cut (cut to size in square shape) laid over & including 20 mm thick (average thickness) cement mortar (1:4) screed bedded and jointed with white cement slurry and pointed with grout of matching shade including all necessary cutting & waste and machine polishing (Mirror finish) in floors complete all as specified and as directed.
M&L for machine cut granite stone slab 20mm thick of approved colour and shade as in floors laid over 20mm thick screed bed in CM 1:6, and jointed in grey cement slurry and pointed with white cement and admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and as directed.
M&L for 25mm thick flame finished sadarahalli machine cut stone of approved colour and shade as in floors, skirting/dado etc over and including 15mm thick backing coat in CM 1:4, laid and jointed in grey cement slurry and pointed with white cement cement and admixture of pigment to match the shade of the slab complete all as specified and as directed.
M & L for machine cut kota stone slab flooring with 20-25mm thick over and including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M & L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting-dado and pillar laid, jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab over and including 15 mm thick backing coat in CM 1:4 complete all as specified and as directed.
Rounding to edges of stone slabs to one edge, such as in steps and other similar situations complete all as specified and as directed.
M&L for stone grit for cushion bed below interlocking paver blocks complete all as specified and directed by Engineer in charge.
M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed.
All as per item No.77 above but except tiles complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for hardcore of gauge n exc.63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 (using 40 mm graded aggregate) 100mm thick as in sub base complete all as specified and as directed.
M&L for 100 mm thick cement concrete 1:2:4 type B-1, (using 20mm graded granite stone aggregate) as in hard standing make impressions while concrete is green complete all as specified and as directed.
M&L for forming contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' including necessary formwork etc complete all as specified and as directed.
Taking down cement or cement lime plaster on brick or concrete surfaces including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.
M & L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed.
M & L for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed.
M & L for preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion distemper over a coat of chalk whiting complete all as specified and as directed.
M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed.
Cleaning of choked particle from filter system of automatic sensor urinal unit removing top cover of urinal and cleaning automatic sensor unit for removing dust particle etc and making the unit in serviceable condition complete all as specified and as directed.
Cleaning and removing all scales and dirt, etc from tanks and from mouths of circulating pipes etc. of capacity exc 250 and n.exc 500 ltrs complete all as specified and as directed.
Cleaning and removing all scales and dirt, etc from tanks and from mouths of circulating pipes etc. of capacity exc 500 and n.exc 1000 ltrs complete all as specified and as directed.
Taking down defective/damaged water storage tank cover and supply & fix new polyethylene tank cover with necessary locking arrangement complete all as specified and directed at site.
S & F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as speciifed in SSR Part I of capacity 500 ltrs with ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed with dia of pipe 25mm complete all as specified and as directed.
All as per item No.93 above but 1000 ltr capacity complete all as specified and as directed.
S&F in repairs 20 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F in repairs 25 mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.
S&F in repairs 25 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F urinal spreader of brass chromium plated and flush cock (lever type) 25mm complete all as specified and as directed.
S&F in repairs flush kit of low level flushing cistern of cascade type WC complete all as specified and as directed.
S&F in repair aluminium composite panel 4mm thick of any colour and shade fixed with self tapping screws on existing aluminium frame work complete all as specified and directed by Engineer-in-Charge.
S&F in repair toughened glass 12mm thick fixed to aluminium frame work including necessary fixing accessories complete all as specified and directed by Engineer-in-Charge.
M&L for 12mm thick plywood, grade BWP, type BB fixed with screws to aluminium frame work with 3mm thick decorative face veneer of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions and all as directed by Engineer-in-Charge.
S&F solar control film 50 micron thick reflective type sticked to glass panes as per instructions of manufacturers at a height approx 20m including taking down existing film and erection of necessary scaffolding complete all as specified and as directed.
Supply, design and erection of steel tubular scaffolding upto a height of 25m inside the AMBC building as per standard engineering practice and safety norms complete including dismantling and removing the same after completion of the work all as directed by Engineer in Charge.
Dismantling luxalon 84R Hi mirror false ceiling system consisting of panel 84mm wide x 16 mm deep made out of 0.5mm thick anodised aluminium of chrome finish at a height approximately 25m from the ground level at foyer of AMBC Nalandha Bldg complete all as specified and directed by Engineer- in- Charge.
Fixing only luxalon 84R Hi mirror false ceiling system consisting of panel 84mm wide x 16 mm deep made out of 0.5mm thick anodised aluminium of chrome finish (serviceable ceiling system obtained from SI item No 105 shall be used) complete all as specified and as directed.
S&F in repair luxalon 84R Hi mirror false ceiling system consisting of panel 84mm wide x 16 mm deep made out of 0.5mm thick anodised aluminium of chrome finish. The panel should be chipped to a baked enameled aluminium panel carrier made out of 0.95mm thick already fixed at a height more than 25m from floor level complete all as specified and as directed.
S&F in repairs GI suspension rod of 4mm dia where ever required to support the panel carriers suspended from ceiling for fixing the false ceiling at foyer of Nalandha Bldg at AMBC as required and directed by Engineer in charge. Note:- Scaffolding work required shall be measured and paid seperately under relevant items of BOQ.
M&L for pre laminated wooden flooring 8mm thick and panel size 120cm x 19 cm / 180 cm x 19 cm matching with existing flooring complete all as specified and as per manufacturer's instructions.
M&L for pre laminated wooden flooring skirting 70 mm width matching with existing laminated wooden flooring complete all as specified and as per manufacturer's instructions.
Repairs/replacement to safety lever locks mild steel with levers for rolling shutters of area not exceeding 15 Sqm complete all as specified and as directed.
Repairs/replacement to MS spring for rolling shutters and applying grease on steel surfaces in side channels for smooth functioning of all steel members for rolling shutters of area not exceeding 15 Sqm complete all as specified and as directed.
Repairs/replacement to interlocking lath section and ball bearing on either side of rolling shutters of area not exceeding 15 Sqm complete all as specified and as directed.
Repairs/replacement to MS tie rod for rolling shutters of area not exceeding 15 Sqm complete all as specified and as directed.
Repairs/replacement to MS push plate for rolling shutters of area not exceeding 15 Sqm complete all as specified and as directed.
M&L for color code point wiring FRLS PVC insulated and unsheathed cable with 1.5 sqmm copper conductor single core multistandred 1100 volt grade conforming to IS 694 drawn through PVC conduit of suitable size, concealed /open suitable size modular metal flush box fitted with modular cover plate with frame (inner/ outer plate) for mounting switches,regulators etc including FRLS 1.5 sqmm earth wire copper insulated wire connected to common earth dolly all as specified for the following:- One light/ fan point controlled by one switch
Supply, fix and testing in replacement of old unserviceable Dali Dimmable LED recessed mounted 600*600 mm (2x2' feet) luminaire having power consumption not more than 33W and light output not less than 3600 lumens with system efficacy> 110 lumen/watt. Luminaire housing shall be made from single piece CRCA body without welding to avoid rusting and prismatic diffuser to reduce glare. The luminaire should be having minimum 50000 Burning hours(L70B50) with CRI ≥80, SDCM<5 and Co-related color temperature (CCT) of 4000K/6500K.The luminaire must have 4KV surge protection integrated in driver, ripple<5%,UGR<19, PF≥0.95, total harmonic distortion THD≤20%, EMI/EMC compliant and operating voltage range 140-270V with High voltage cutoff@325 ± 15V with auto restart feature. Luminaire and driver shall be separately BIS approved of same complete all as specified and directed by Engineer-in-Charge. Make:- Philips Cat Part No.RC380B LED36S-6500 G6 L60 W60 PSD OD OC/ or equivalent in Kesslec /Osram only. Note:- LM80,LM79 ,type test certificate and BIS certificate needs to be submitted for approval.
Supply and programming in replacement of old unserivceable DALI controller for programming & scene setting of light fixtures DALI outputs suitable for tuning of CCT (DALI 209) and DALI HF Ballasts, electronic low voltage transformers and LED fixtures upto 64nos x 1 loop/ circuits rated at 20A built in DALI bus power supply, automatically isolate the power circuit when all associated channels are at 0%. Control Options - Control of this device can be via a combination of methods, eg. serial control port, relay contacts, push button wall stations, infrared receivers and time clocks. DIN rail mount installation. All connection terminals are accessible without disassembly complete all as specified and directed by Engineer-in-Charge. Make:- Philips Cat Part No.DDBC120-DALI or equivalent in Osram/Schneider. Note:- The cotractor has to submit warranty certificate of 5 years or 50000 burning hrs from the manufacturer.
Supply and programming in replacement of old unserviceable of 6 button Antumbra Display Keypad User interphase - 16 Pages support up to 96 Functions, Automatic wall wash lighting effect triggered by user presence, Multiple language and icons to understand button functions easily complete all as specified and directed by Engineer-in-Charge. Make:- Philips Cat Part No. PADPE-AM or equivalent in Osram/Schneider.
Supply and programming in replacement of old unserviceable communication module to user interphases with onboard processor, can store and recall up to 21 configurations using the DIP switch, powered through dynet and no additional power required complete all as specified and directed by Engineer-in-Charge. Make:- Philips Cat Part No. DACM or techno commercially equivalent in Keselec/Osram.
S&F in replacement of old unserviseable MCB single pole 6 to 32 Amps capacity 230 Volts, C series 10 KA breaking capacity all as specified and directed by Engineer in charge.
S&F in replacement of old unserviceable MCB DP, 2A B curve MCB, 230V, 10 kA breaking capacity complete all as specified and directed by Engr-in-Charge.
M&L for FRLS, PVC insulated flexible copper conductor 2 core 1 sqmm drawn through PVC conduit of suitable size on ceiling/clamping on walls properly including making good disturbed surfaces complete all as specified and directed by Engr-in-Charge.
M&L for CAT 6 F/UTP cable drawn through PVC conduit of suitable size on ceiling/clamping on walls properly including making good disturbed surfaces complete all as specified and directed by Engr-in-Charge.
S&F in replacement of unserviceable surge protection device, 2 pole tye 1+2 , with stand minimum of 15 kilo ampere, complice I impulse of 10/350 and I max of 20 kilo ampere which has a spark gap unit in it and terminal breakage. It should be response sensitive by 10 milli second complete all as specified and directed by Engineer-in-Charge. Make:- Mersen/Philips/Siemens.
S&F in replacement of old unserviceable 3x14 way flexy DB for fitment of MCBs/Dali driver including making good disturbed surfaces complete all as specified and directed by Engr-in-Charge. Make:- Legrand/ABB/Havells.
S&F in replacement modular switch 1 way 6 Amps 1 module suitable for fixing existing cover plate complete all as specified and directed by Engineer in charge.
S&F in replacement modular switch 1 way 16 Amps 1 module suitable for fixing existing cover plate complete all as specified and directed by Engineer in charge.
S&F in replacement modular socket 6 Amps 2/3 pin combined 2 module suitable for fixing existing cover plate complete all as specified and directed by Engineer in charge.
S&F in replacement modular socket 6/16 Amps 2/3 pin combined 2 module suitable for fixing existing cover plate complete all as specified and directed by Engineer in charge.
S&F in replacement modular fan step regulator 120W, electronic 2 Module step up type AC 230 Volts complete all as specified and directed by Engineer in charge.
Supply and fix in replacement of old unserviceable conventional post top lantern fitting with IP 65 rated LED post top luminaire, 20/25Watts, including surge protection device complete all as specified and directed by Engineer-in-Charge. Make:- Bajaj Cat part no BGCTNP 20W WH or CBP-610-25-57-SL-CA NBK of Crompton or CORALPT25WLED 830SSYMTOPC of Havells.
Supply and fix in replacement LED bollard light fitting robust type with soft 360 light 9/10W with IP 65 protection complete all as specified and directed by Engineer-in-Charge. Make:- Crompton Cat part no.LBLTW-10-WW or BGBOS 650 9W LED WW of Bajaj or TURINBLS10WLED830PSYMTOPC of Havells.
Supply and fix in replacement of post top, energy saving, environmental friendly, spun aluminium landscape luminaire with high power LEDs as light source of 40 watt suitable for pole dia of 50 mm complete all as specified and directed by Engr in charge. Make:- Crompton Model No. LPTO-40-CDL/ Havells Cat No RUBY PT40WLED 757PSYMTOPC/ Bajaj Cat No BGCTNP40W LED WH.
Material and labour for mass filling in foundation/coping/wall with PCC 1:3:6 using 20 mm graded aggregate type C1 as per site requirement complete all as specified and directed by Engr in charge.
Supply and fix in replacement of copper cable flexible 1.5 Sqmm 3 core 230 Volts complete all as specified and as directed by Engr-in-charge.
M&L for taking down the unserviceable LT UG cable of size 6 sqmm to16 sqmm 4 core including removing electrical connection and keeping side serviceable cable include removing cable protection cover etc complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 mtr in width and depth and getting out in hard/dense soil complete all as specified and as directed by Engr-in-charge. Notes:- a) For all items involving excavation work contractor has to obtain prior approval from station HQ to avoid loss of other co existing utility services, in case of damage to any property he would be liable for its rectification. b)The excavation has to be done manually only.
Returning and filling in including levelling watering and well ramming into layers not exceeding 25 cm in hard/dense soil complete all as specified and directed by Engr-in-charge.
Removal of excavated soil to a distance not exceeding 50 mtrs and depositing at a level not exceeding 1.5 mtr from starting point complete all as specified and directed by Engineer-in-Charge.
Supply and spreading riddle earth for cushioning and covering of the UG cable in trenches complete all as specified and as directed. Note:- Punned thickness shall be measured for payment purpose.
Supply and lay PCC un reinforced cable cover of size 250mmx 150mmx40mm, class LV type I flat for cable protection complete all as specified and as directed.
Relaying of PCC un reinforced LT cable cover of size 250mmx 150mmx40mm item obtained from taking down complete all as specified and directed by Engr in charge.
Relaying cable XLPE insulated heavy duty galvanised steel strip armoured LT 1100 volt grade with aluminium conductors multistranded confirming to IS laid in trenches/pipes/wall size up to 16 sqmm 4 core complete all as specified and directed by Engineer-in-Charge.
Supply and laying LT cable in trench/fixing to walls/pipe/pole with proper saddles, lugs, glands XLPE insulated heavy duly galvanised steel strip armoured LT1100 volt grade with aluminium conductors of size 16 sqmm 4 core complete all as specified and as directed.
All as per item no.145 above but size of 10 sqmm 4core complete all as specified and as directed.
Supply and laying LT cable in trench/fixing to walls/pipe/pole with proper saddles, lugs, glands XLPE insulated armoured LT1100 volt grade with copper conductors of size 2.5 sqmm 4 core complete all as specified and directed by Engineer-in-Charge.
S&F in replacement of conventional flood light fitting into LED fittings, die cast aluminium IP 66 120 W LED flood light luminaire complete all as specified and as directed by Engineer-in-Charge. Make:- Crompton Model No LFLN 120 CDL/60-M or PRAZE F 144L WH NB-A5 TG SD of Bajaj or JETA irisfls120WLED 757 P2AV2WBLTG of Havells.
Supply and fix in replacement weather proof junction boxes made out of thermo plastic consisting of 4 nos of connectors of capacity 40 amp 415v and 1no of SP MCB rating 6 AMP 240 V with proper closing arrangement, elmax connector for neutral link including pole mounting clamp with nut bolts. Box should be able to accommodate two 16Sqmm cable and the box should have two cable entry complete all as specifed and directed by Engineer-in-Charge.
M&L for cutting the existing road/hard standing made of concrete or premix carpet, WBM, soling and moorum filling including excavating for laying the cable/pipe, width 0.5 Mtr and depth 0.7 Mtr all as directed and making good the road/hard using pre mix bituminous as required at site to match with the existing surface complete all as specified and directed by Engineer-in-Charge. Note:- Before using the hand drilling/ breaker machine diamond cutter will be used all as directed by Engr-in-charge.
Supply and fix in replacement of GI tubing light grade 50 mm nominal dia in trench/road/pole for cable protection complete all as specified and as directed.
SATHEESAN.T.K
Sreekrupa Enterprises
Benchmark Engineers and Contractors
SANDR
PADMANABHAN. K.V
M/s K V Ramachandran
K P DIVAKARAN
KUZHIKKAL ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .